• Journal of Radiation Protection and Research
• /
• 제38권3호
• /
• pp.149-156
• /
• 2013

최근 국내 방사선이용기관 수의 증가와 시설의 다양한 투자로 운영 및 안전관리가 복잡해지고 있다. 그러나 작업종사자 수와 방사선 시설증가에도 불구하고 방사선안전관리자 인력은 증가되지 않고 있는 실정이며, 소수의 방사선안전관리자에 의해 방사선작업종사자 등록 및 관리, 선원관리, 방사선량 감시, 배기 및 배수 등의 많은 업무가 관리되고 있다. 이러한 문제점은 방사선 사고발생의 직 간접적인 사고의 원인이 되고 있다. 본 연구에서는 방사선을 이용하는 시설의 효율적인 안전관리와 사고예방을 위한 방사선안전관리 업무절차를 도식화(Process Mapping)하였다. Process Mapping 개발을 위해 방사선안전관리 현안요건을 분석하고, 개별 절차상의 업무분석을 통해 방사선안전관리 체계를 정비하였다. 개발한 Process Mapping을 바탕으로 각 기관에 적합한 업무절차의 흐름을 명확히 구성함으로써 방사선을 이용하는 시설의 안전 위해 요인을 줄이고 방사선안전관리 체계를 개선할 수 있으며, 필요에 따라 Process Mapping을 수정보완하여 방사선안전관리에 효과적으로 사용할 수 있다.

• 정보처리학회논문지D
• /
• 제9D권5호
• /
• pp.887-896
• /
• 2002

SPICE(Software Process Improvement and Capability dEtermination) 평가 모형에 기반한 중소기업형 프로세스 개선 모형으로 SPIRE (Software Process Improvement in Regions of Europe)가 개발되어 제공되고 있다. 그러나 SPIRE에서는 조직의 경영 목적에 맞는 프로세스 선택을 위한 구체적인 지침이나 매핑을 제시하고 있지 못하다. 이 연구에서는 프로세스 선택시 활용할 수 있는 객관적인 경영 목표-프로세스간 매핑 참조 테이블을 작성하고, 이를 활용한 프로세스 선정 방안을 제시한다. 매핑 참조 테이블은 델파이 기법을 활용하여 국내 소프트웨어 프로세스 전문가들의 의견 수렴을 통해 작성되었다. 본 연구에서 제시된 프로세스 선정 기법은 매핑 참조 테이블과 해당 업체 관련자의 주관적인 매핑 정보를 종합적으로 활용하여 최종적으로 개선 대상 프로세스를 선정되도록 한다. 이 연구에서 제시된 선정 방법을 2개의 중소 소프트웨어 조직에 실제 적용하여 활용 가능성을 검토하였다. 매핑 참조 테이블을 사용하여 업체 관련자가 간과하고 있던 주요 프로세스를 평가 대상 프로세스로 선정할 수 있었다.

• 전자공학회논문지CI
• /
• 제47권2호
• /
• pp.1-10
• /
• 2010

가상의 프로세스 토폴로지를 물리적인 프로세서 토폴로지로 매핑하는 문제는 병렬 프로그래밍에서 가장 중요한 이슈 중의 하나이다. 그러나 이 매핑은 토폴로지 비규칙성 및 라우팅 복잡성으로 인해 어려운 문제로 여겨지고 있다. 본 논문에서는 프로세스간 통신 패턴으로 2차원 메쉬 프로세스 토폴로지를 가정하여, 비규칙 클러스터 시스템을 위한 새로운 프로세스 매핑 기법인 인접 기반 매핑(AM)을 제안한다. 클러스터 시스템은 전통적인 규칙성 네트워크에서는 달성하기 어려운 상호연결 유연성과 시스템 확장성을 제공하기 때문에 여러 해 동안 활발히 연구 개발되어 오고 있다. 제안한 AM은 가상 프로세스 토폴로지에서 이웃하는 프로세스를 물리적인 프로세서 토폴로지의 인접한 프로세서에게 매핑시킨다. 시뮬레이션 결과에 따르면, 제안한 AM은 기존 방법에 비하여 매핑 품질이 우수하고 프로세스간 지연시간이 감소하는 결과를 나타낸다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.81-84
• /
• 2001

An inverse finite element approach is employed for more capability to design the optimum blank shape from the desired final shape with small amount of computation time and effort. In some drawing or stamping simulation with inverse method, it is difficult to apply inverse scheme due to the large aspect ratio or steep vertical angle of inclination. The reason is that initial guesses are hard to make out with present method for those cases. In this paper, a direct mesh marring scheme to generate initial guess on the sliding constraint surface described by finite element patches is suggested for one step inverse analysis to calculate initial blank shape. Radial type mapping is adopted for the simulation of rectangular cup drawing process with large aspect ratio and parallel type mapping for the simulation of S-Rail forming process with steep vertical angle of inclination.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.113-115
• /
• 2010

We studied the methods to utilize vehicle-based mobile mapping system for field investigation work of digital map generation process. Map layers which should be checked by field investigation were analyzed to find the possibility of being checked with data from vehicle-based mobile mapping system. Also new process for digital map generation were suggested to adopt field investigation by vehicle-based mobile mapping system. We performed field investigation work on the Kangneung area by vehicle-based mobile mapping on a trial bases and compared the results with a results from usual field investigation method.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권4호
• /
• pp.178-184
• /
• 2023

AI image generation technology has become a popular research direction in the field of AI, which is widely used in the field of digital art and conceptual design, and can also be used in the process of 3D texture mapping. This paper introduces the production process of 3D texture mapping using AI image technology, and discusses whether it can be used as a new way of 3D texture mapping to enrich the 3D texture mapping production process. Two AI deep learning models, Stable Diffusion and Midjourney, were combined to generate high-quality AI textures. Finally, the lmage to material function of substance 3D Sampler was used to convert the AI-generated textures into PBR 3D texture maps. And applied in 3D environment. This study shows that 3D texture maps generated by AI image generation technology can be used in 3D environment, which not only has short production time and high production efficiency, but also has rich changes in map styles, which can be quickly adjusted and modified according to the design scheme. However, some AI texture maps need to be manually modified before they can be used. With the continuous development of AI technology, there will be great potential for further development and innovation of AI-generated image technology in the 3D content production process in the future.

• Journal of Information Processing Systems
• /
• 제9권1호
• /
• pp.1-30
• /
• 2013

The capitalization of know-how, knowledge management, and the control of the constantly growing information mass has become the new strategic challenge for organizations that aim to capture the entire wealth of knowledge (tacit and explicit). Thus, knowledge mapping is a means of (cognitive) navigation to access the resources of the strategic heritage knowledge of an organization. In this paper, we present a new mapping approach based on the Boolean modeling of critical domain knowledge and on the use of different data sources via the data mining technique in order to improve the process of acquiring knowledge explicitly. To evaluate our approach, we have initiated a process of mapping that is guided by machine learning that is artificially operated in the following two stages: data mining and automatic mapping. Data mining is be initially run from an induction of Boolean case studies (explicit). The mapping rules are then used to automatically improve the Boolean model of the mapping of critical knowledge.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권4호
• /
• pp.209-215
• /
• 2009

Reconfigurable array architecture is recently attracting much attention. It is a flexible hardware architecture, which can dynamically change its configuration to execute various functions while maintainning high performance. However, pursuing flexibility and performance at the same time leads to complexity, thereby makes the mapping of applications a difficult process. There have been attempts to use compiler or high level synthesis techniques to solve the problem. In this paper, we propose yet another method, which uses libraries for the mapping to provide an abstracttion of the internal structure and at the same time to reduce the development time and efforts through the automated process. We have selected a JPEG decoder as an example to apply the proposed method. As a result, we obtained about 20% less performance compared to manual mapping but development time is dramatically reduced to less than 1%.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.705-708
• /
• 2005

Mobile Mapping Systems using the vehicle equipped the GPS, IMU, CCD Cameras is the effective system for the management of the road facilities, update of the digital map, and etc. They must provide users with the sensor data which is acquired by Mobile Mapping Systems in real-time so that users can process what they want by using the latest data. But it' s not an easy process because the amount of sensor data is very large, particularly image data to be transmitted. So it is necessary to reduce the amount of image data so that it is transmitted effectively. In this study, the effective method was suggested for the compression/decompression image data using the Wavelet Transformation and Huffman Coding. This technique will be possible to transmit of the geographic information effectively such as position data, attitude data, and image data acquired by Mobile Mapping Systems in the wireless internet environment when data is transmitted in real-time.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.63-67
• /
• 2017

In this study, We developed a simple and low cost capacitive pressure mapping sensor and microcontroller-base lock-in amplifier array. We developed capacitive type pressure mapping sensor by forming the electrode and adhesives on plastic films using only the printing process, and the finishing the process by bonding the two films. Lock-in amplifier array was based on a general purpose microcontroller and had only a charge amplifier as analog circuits. In this study, a $10{\times}10$ capacitive type pressure mapping sensor and lock-in amplifier array was fabricated and its characteristics were analyzed.