• IE interfaces
• /
• v.25 no.2
• /
• pp.170-177
• /
• 2012

Process control is essential to operate the semiconductor process efficiently. This paper consider fault classification of semiconductor based cyclic signal for process control. In general, process signal usually take the different pattern depending on some different cause of fault. If faults can be classified by cause of faults, it could improve the process control through a definite and rapid diagnosis. One of the most important thing is a finding definite diagnosis in fault classification, even-though it is classified several times. This paper proposes the method that one-class classifier classify fault causes as each classes. Hotelling T2 chart, kNNDD(k-Nearest Neighbor Data Description), Distance based Novelty Detection are used to perform the one-class classifier. PCA(Principal Component Analysis) is also used to reduce the data dimension because the length of process signal is too long generally. In experiment, it generates the data based real signal patterns from semiconductor process. The objective of this experiment is to compare between the proposed method and SVM(Support Vector Machine). Most of the experiments' results show that proposed method using Distance based Novelty Detection has a good performance in classification and diagnosis problems.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.857-865
• /
• 1995

The main purposes of this study were to find out the new classification system of the clothing evaluative criteria(CEC), 3nd to clear up the relationshiops of new classification system and the existing classification systems. For this purpose, the existing literatures related with the CEC(the classification system, and the variables) were investigated. The results of the study were as follows: 1. The existing classification systems were 'the intrinsic. non-intrinsic classification', 'the level classification', 'the purchase process classification' The new classification system of the CEC is based on 'the view-point of subjets'. The system was divided into the point of clothing itself, the wearer, the other, the wearing situation. The wearer's point of view is divided into the point of the value, and the physical characteristics of wearer 2. The image was included as the concept of the CEC, and the image classification could be suggested. 3. The relationships of the classification systems were as follows: $\circled1$ The intrinsic. non-intrinsic classification system included the level classification, the view-point classification, the image classification, and the buying process classificstion. $\circled2$ The level classification, the view.point classification, and the image classification were linked mutually, but the buying process classification is seperated from these classifications.

• International Journal of Knowledge Content Development & Technology
• /
• v.13 no.1
• /
• pp.111-130
• /
• 2023

There are the national science and technology standard classification system used in Korea, the classification according to the standard classification system for educational organization units, and the Korean standard education classification by the National Statistical Office. It is not suitable for calculation or evaluation, and classification is still mixed depending on the purpose of use. Therefore, in this study, the current status of academic standard classification, issues related to the standard classification system such as research foundation associations and research institutes, and issues related to the academic standard classification through the analysis of existing prior research issues, etc. As a result of the research, first, it is necessary to maintain and strengthen the linkage of the academic classification system, such as maintaining the linkage between the relevant departmental classification systems and strengthening the linkage with the relevant classification system, as a result of analysis of major issues in the academic standard classification system, and the systematic improvement cycle of the revision process and management system and settings are required.

• Journal of the Korean Society of Earth Science Education
• /
• v.4 no.2
• /
• pp.151-165
• /
• 2011

Following a microgenetic design, this study was analysed the characteristic and the change of classification strategy that appear in college students' classification activity. The 4 tasks were developed for classification activity; a shell as a familiar real things, an animal fossil as a unfamiliar real things, a snow flake as a familiar picture cards and galaxy as a unfamiliar picture card. Achieved study to 6 college students who major in elementary education. Data were collected by interview with subjects, subject's classification schema, investigator's observation of subject's activity, and videotaped that record subject's subject classification process over an extended period of 6 times. Result proved in this study is as following. In the 6 times of the data collection procedures, a strategy F identifying concrete attribution of classification objects and a more detailed strategy X3 combining qualitative, spatial and dimensional attribution were found and more frequently used in both groups of college students which reported a classification process and did not report the process. While discovery and absorption of both a concrete classification strategy and a detailed classification strategy were rapidly developed in the reporting group, they were gradually developed in the non-reporting group. In addition to this, as the data collection procedures were progressing, the college students were familiar with change factors of classification tasks and in the case of pictures the classification strategy showed more desirable changes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.569-577
• /
• 2008

The purpose of this study is focused on the development of compound classification process by mixing multitemporal data and annexing a specific image enhancement technique with a specific image classification algorithm, to gain more accurate land information from satellite imagery. That is, this study suggests the classification process using canonical correlation classification technique after principal component analysis for the mixed multitemporal data. The result of this proposed classification process is compared with the canonical correlation classification result of one date images, multitemporal imagery and a mixed image after principal component analysis for one date images. The satellite images which are used are the Landsat 5 TM images acquired on July 26, 1994 and September 1, 1996. Ground truth data for accuracy assessment is obtained from topographic map and aerial photograph, and all of the study area is used for accuracy assessment. The proposed compound classification process showed superior efficiency to appling canonical correlation classification technique for only one date image in classification accuracy by 8.2%. Especially, it was valid in classifying mixed urban area correctly. Conclusively, to improve the classification accuracy when extracting land cover information using Landsat TM image, appling canonical correlation classification technique after principal component analysis for multitemporal imagery is very useful.

• Journal of Korea Multimedia Society
• /
• v.19 no.7
• /
• pp.1197-1207
• /
• 2016

The purpose of this study was to develop an evidence-based Nursing Process System on Nursing Diagnosis, Nursing Outcomes, and Nursing Interventions Classification targeting nurse students. We use standard classification-focused research data on the basis of Nursing Diagnosis Classification established by NANDA (North American Nursing Diagnosis Association), NOC (Nursing Outcomes Classification) and NIC (Nursing Interventions Classification) mainly developed by Iowa Sate University. The existing research methods are difficult to be applied the consistent nursing process, since such methods need to repeatedly enter the same nursing process without systematic guidelines. But, this study was coded data of standardized nursing process in accordance with the 10 clinical condition in order to implement the nursing process macro, and developed a system that reflects the needs of nursing educators. Therefore, nurse students can improve clinical decision-making ability, and naturally learn the nursing process through a system developed.

• Journal of Digital Convergence
• /
• v.6 no.4
• /
• pp.177-183
• /
• 2008

This paper aims to offer a solution based on intelligent document classification to create a user-centric information retrieval system allowing user-centric linguistic expression. So, structures expressing user intention and fine document classifying process using EBL, similarity, knowledge base, user intention, are proposed. To overcome the problem requiring huge and exact semantic information, a hybrid process is designed integrating keyword, thesaurus, probability and user intention information. User intention tree hierarchy is build and a method of extracting group intention between key words and user intentions is proposed. These structures and processes are implemented in HDCI(Hybrid Document Classification with Intention) system. HDCI consists of analyzing user intention and classifying web documents stages. Classifying stage is composed of knowledge base process, similarity process and hybrid coordinating process. With the help of user intention related structures and hybrid coordinating process, HDCI can efficiently categorize web documents in according to user's complex linguistic expression with small priori information.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.2
• /
• pp.127-137
• /
• 2019

In this study, we have developed a calculation system for BIM-based quantities, 4D process, and 5D construction costs, by integrating object shape attributes and the standard classification system which consist of Cost Breakdown System(CBS), Object Breakdown System(OBS) and Work Breakdown System(WBS) in order to use for the 4 dimensional process control of roads and rivers. First, a new BIM library database connected with the BIM library shape objects was built according to the CBS/OBS/WBS standard classification system of the civil engineering field, and a integrated database system of BIM-based quantities, process(4D), and construction costs(5D) for roads and rivers was constructed. Nextly, the process classification system and the cost classification system were automatically disassembled to the BIM objects consisting of the Revit-family style elements. Finally, we added functions for automatically generating four dimensional activities and generating a automatic cost statement according to the combination of WBS and CBS classification system The ultimate goal of this study was to extend the integrated quantities, process(4D), and construction costs(5D) system for new roads and rivers, enabling the integrated use of process(4D) and construction costs(5D) in the design and construction stage, based on the tasks described above.

• Journal of Korean Academy of Nursing
• /
• v.30 no.6
• /
• pp.1411-1426
• /
• 2000

A nursing activity classification for hospitalized patients was performed based on an article review regarding nursing definition and nursing activity classification system. The study was conducted as follows: 1) Taxonomy was developed by the research team through the Delphi process and review article. The taxonomy consists of four nursing processes, (assessment, diagnosis, intervention and evaluation) and twelve nursing activity domains space (resperation, nutrition, elimination, exercise/alignment maintenance, comfort, hygiene, safety, spiritual support, counseling/ education, medication, communication, patient and information management). 2) First, nursing activities of the intervention process were listed and then classified by the nursing process of assessment, diagnosis, intervention and evaluation. The list consists of twelve nursing activity domains and 136 nursing activities. 3) A pilot study was conducted in two hospitals to verify validity and appropriateness of nursing activities. 4) The content validity index, which was calculated by 6 clinical practice experts, was 0.95. Also, a nursing activity classification system should also be developed in the department of community nursing and home health care nursing.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.517-524
• /
• 2008

In order to classify an satellite imagery into geospatial features of interest, the supervised classification needs to be trained to distinguish these features through training sampling. However, even though an imagery is classified, different results of classification could be generated according to operator's experience and expertise in training process. Users who practically exploit an classification result to their applications need the research accomplishment for the consistent result as well as the accuracy improvement. The experiment includes the classification results for training process used VITD polygons as a prior probability and training parameter, instead of manual sampling. As results, classification accuracy using VITD polygons as prior probabilities shows the highest results in several methods. The training using unsupervised classification with VITD have produced similar classification results as manual training and/or with prior probability.