• 한국경영과학회지
• /
• 제16권1호
• /
• pp.68-75
• /
• 1991

The purpose of this thesis is to develop the new technique for the analysis of seasonal time series by extending the vector sample auto-correlation function(VSACF), which was developed for ARMA modelling procedure. After the problems of VSACF for modelling seasonal time series are investigated, the adjacent variance is defined and used for decomposing the seasonal factor from the seasonal time series. The seasonal indices are calculated and the VSACF is applied to the transformed series. The automatic procedure for modelling seasonal time series is suggested and applied to the real data, the international airline passenger travel.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.198-203
• /
• 2003

Due to the low production cost and space availability which are originated from the structural simplicity of the torsion beam axle suspension, the suspension has been frequently used for sedan and SUV style vehicles. The design procedure of the suspension, however, requires significant amount of time which prohibits more efficient design of the suspension. In this study, an integrated procedure and constituting modules are explained and the performance of the corresponding program is exhibited. The integrated procedure enables one to save the design time and cost significantly.

• International Journal of Automotive Technology
• /
• 제5권2호
• /
• pp.115-122
• /
• 2004

Evaluation of active safety control systems usually relies heavily on field testing and is time-consuming and costly. Advances in computer simulations make it possible to perform exhaustive design trials and evaluations before field testing, and promise to dramatically reduce development cost and cycle time. In this paper, a comprehensive simulation-based evaluation procedure is proposed, which combines standard evaluation maneuvers, worst-case techniques, and a driver model for closed-loop path following evaluations. A vehicle dynamic controller (VDC) for a popular Sport Utility Vehicle is evaluated using the proposed procedure. Simulation results show that the proposed procedure can be used to assess the performance of the VDC under various conditions and provides valuable information for the re-design of the VDC.

• 대한산업공학회지
• /
• 제9권2호
• /
• pp.27-35
• /
• 1983

This paper describes a procedure of generating economic cutter-location(CL) data for the machining of sculptured surfaces on a multi-axis NC milling machine. Measures of economy are the machining time (cutter move distance) and the length of NC tape (number of CL data points). The presented procedure minimizes both the number of CL data and the total distance of cutter moves, for a given cutter (spherical end-mill) size and parameteric cutting direction, while satisfying given tolerance requirements. The procedure has been implemented in FORTRAN for a smooth composite Bezier surface. The maximum allowable cutter size is calculated by the program so that a user can choose a cutter size. CL data can be generated in both parametric directions u and v. Experimental results show that there are significant differences between the parametric directions, and that cutter size should be as large as possible in order to minimize the cutting time and NC tape length.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.476-486
• /
• 1995

In this paper, an attempt has been made to revise Raafat' s(1985) results on an inventory model for decaying raw materials and the finished product at a constant rate which was based on Goyal's integrated inventory model for a single product system. This paper is concerned with scheduling the frequencies of order quantity of several different raw materials on a production inventory model. The purpose of this paper is to present a simple method of deciding the frequencies of order quantity of raw materials, in the sense of minimizing the average total cost of the system. We describe on iterative procedure for directly determining near optimal frequencies of order quantity for the raw materials and the associated fundamental cycle time which can be used for constructing the production duration of the finished product. In cases where feasible schedules cannot be constructed using the values from the iterative procedure, the procedure provides a basis for changing the order quantity frequencies and the fundamental cycle time to obtain feasible schedules. An example is given to illustrate the derived results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.379-384
• /
• 1994

In this paper, a fish-drying control method is proposed, which utilizes prediction of proper change in- weight of material fish based on skilled worker's performance. The function of the proposed system is largely broken down into two procedures: The procedure before drying and the one during drying. The procedure before drying is the determination of necessary drying conditions and the required drying time. Required drying time and proper changes in weight for a specific product are obtained by using fuzzy inference and regression models. The procedure during drying is the prediction of the state of material at the end of drying, or the state of product and regulation of drying conditions to attain the prescribed goal before drying. The prediction of product is obtained by using a set of linear-differential equations obtained by the authors' previous work. Drying conditions are regulated by using fuzzy inference. A good agreement between the results of simulation and experiments is obtained, which implies the usefulness of the present control method.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.258-265
• /
• 2002

Most structures are expected deform nonlinear and inelastic behavior when subjected to strong ground motion. Nonlinear time history analysis(NTHA) is the most rigorous procedure to compute seismic performance in the various inelastic analysis methods. But nonlinear analysis procedures necessitate more reliable and practical tools for predicting seismic behavior of structures. Some building codes propose the capacity spectrum method. This method is the concept of an equivalent linear system, wherein a linear system having reduced stiffness and increased damping is used to estimate the response of the nonlinear system. This procedure are conceptually simple, but the iterative procedure is time-consuming and may sometimes lead to no solution or multiple solutions. This paper presents a nonlinear direct spectrum method(NDSM) to evaluate seismic performance of structures, without iterative computations, given by the structural initial elastic period and yield strength from the pushover analysis, especially for mixed building structure.

• 한국경영과학회지
• /
• 제19권1호
• /
• pp.113-122
• /
• 1994

This study proposes a new procedure to find an initial solution to reduce the number of iterations of goal programming. The process of computing an initial solution is divided into two steps in this study. Decision variables which satisfy feasibility using Gaussian eliminations construct an initial solution reducing the iterations in the first step. It uses LHS as a tool that decision variables construct an initial solution. The initial solution which is constructed by the first step computes the updated coefficient of the objective function in the second step. If the solution does not satisfy the optimality, the optimal solution using the Modified Simplex Method is sought. The developed method doesn't reduce the overall computing time of goal programming problems, because time is more required for the process of constructing an initial solution. But The result of this study shows that the proposed procedure can reduce the large number of iterations in the first step effectively.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.378-384
• /
• 2002

In this paper, we propose a mixed integer optimization approach for solving the inventory problem with variable lead time, reorder point, crashing cost and price -quantity discount. Chang and Chang[15] study a continuous review inventory model in which lead time is a decision variable under price-quantity discount. However, their study cannot find the optimal solution due to the flaws in the modeling and the solution procedure. We present a complete procedure to find the optimal solution for the model. In addition to the above contribution, we also apply the minimax distribution free approach to the model to devise a practical procedure which can be used without specific information on demand distribution.

• 산업경영시스템학회지
• /
• 제28권1호
• /
• pp.41-48
• /
• 2005

In this paper, we propose a systematic procedure to determine standard time and cycle time in a TFT-LCD factory. The proposed procedure mainly consists of data preprocessing, hypothesis testing and Group technology. Data preprocessing extracts relevant data from large on-line data sets by eliminating corrupt and noisy data. Hypothesis test techniques have been used to determine whether the standard information has been changed. Also, Group technology has been applied to generate standard information for newly developed products. The proposed procedure has been successfully applied to the production information system of a TFT-LCD factory in Korea.