• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.831-839
• /
• 2016

Seismic qualification by test is widely used as a way to show the integrity and functionality of equipment that is related to the overall safety of nuclear power plants. Another means of seismic qualification is by direct integration analysis. Both approaches require a series of time histories as an input. However, in most cases, the possibility of using real earthquake data is limited. Thus, artificial time histories are widely used instead. In many cases, however, response spectra are given. Thus, most of the artificial time histories are generated from the given response spectra. Obtaining the response spectrum from a given time history is straightforward. However, the procedure for generating artificial time histories from a given response spectrum is difficult and complex to understand. Thus, this paper presents a simple time-domain method for generating a time history from a given response spectrum; the method was shown to satisfy conditions derived from nuclear regulatory guidance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.777-786
• /
• 1999

This work is concerned with the assignment of the desired eigenstructure for linear time-varying systems such as missiles, rockets, fighters, etc. Despite its well-known limitations, gain scheduling control appeared to be the focus of the research efforts. Scheduling of frozen-time, frozen-state controller for fast time-varying dynamics is known to be mathematically fallacious, and practically hazardous. Therefore, recent research efforts are being directed towards applying time-varying controllers. In this paper, ⅰ) we introduce a differential algebraic eigenvalue theory for linear time-varying systems, and ⅱ) we also propose an eigenstructure assignment scheme for linear time-varying systems via the differential Sylvester equation based upon the newly developed notions. The whole design procedure of the proposed eigenstructure assignment scheme is very systematic, and the scheme could be used to determine the stability of linear time-varying systems easily as well as provides a new horizon of designing controllers for the linear time-varying systems. The presented method is illustrated by a numerical example.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.190-200
• /
• 1996

Step-by-step time integration methods are widely used for solving structural dynamics problem. One difficult yet critical choice an analyst must make is to decide an appropriate time step size. The choice of time step size has a significant effect on solution accuracy and computational expense. The objective of this research is to derive error estimate for newly developed time integration method and develop automatic time step size control algorithm for structural dynamics. A formula for computing error tolerance is derived based on desired period resolution. An automatic time step size control strategy is proposed based on a normalized local error estimate for the generalized-α method. Numerical examples demonstrate the developed strategy satisfies general design criteria for time step size control algorithm for dynamic problem.

• Journal of Trauma and Injury
• /
• v.25 no.4
• /
• pp.166-171
• /
• 2012

Purpose: In patients with traumatic hemoperitoneum or pelvic bone fracture who underwent angiography and embolization, we want to find the prognostic factors related with mortality. Methods: Patients(333 patients) who visited our hospital with traumatic injury from March 2008 to April 2012 were included in this study. Only 37 patients with traumatic hemoperitoneum or pelvic bone fracture underwent angiography and embolization. A retrospective review was conducted, and Glasgow coma scale (GCS), Revised trauma score (RTS), Injury severity score (ISS), initial laboratory finding and time interval, the amount of transfusion from the arrival at the ER to the start of embolization, and the vital signs before and after procedure were checked. Stastical analysis was conducted using the Chi square and Mann-Whitney U test. Results: In univariate analysis, the amount of transfusion, the base deficit before procedure, the systolic blood pressure before and after the procedure, the GCS, the RTS and the ISS were significantly associated with prognosis. In the multivariate analysis, the ISS and the base deficit had significant association with prognosis. Of the 37 patients who underwent angiography and embolization, 31 patients needed not additional procedure (Group A) while the other 6 patients needed an additional procedure (Group B). After procedure, a statistically significant higher blood pressure was observed in Group A than in Group B. As to the difference in blood pressure before and after the procedure, a statistically significant decrease in systolic blood pressure was observed in Group B, but an increase was observed in Group A. Conclusion: In traumatic hemoperitoneum or pelvic bone fracture patients who underwent angiography and embolization, GCS, ISS, RTS, transfusion amount before the procedure, initial base deficit and systolic blood pressure were factors related to mortality. When patients who underwent angiography and embolization only were compared with patients who underwent re-embolization or additional procedure after the first embolization, an increase in systolic blood pressure after embolization was a prognostic factor for successful control of bleeding.

• The Journal of the Korea Contents Association
• /
• v.10 no.10
• /
• pp.36-44
• /
• 2010

Recently, as new weapons are being developed, test equipments to test their functions inevitably require real-time features. However, since test equipments based on Windows can not support real-time requirements, we have no choice but to use third-party solutions such as RTX or INtime. This leads to increase the development cost of each test equipment. This paper suggests an real-time implemented kernel(RTiK) which operates as a device driver on Windows. RTiK provides another timer using the Local APIC of x86 microprocessors. It supports real-time requirements by periodically executing the required services using Windows-independent timer interrupts to guarantee task deadlines. To reduce the interrupt latency, we used deferred procedure calls provided by Windows. We also used the export driver to implement and modify user-defined functions without accessing the RTiK internals. Using an oscilloscope, we prove that the RTiK kernel proposed in this paper guarantees up to 0.1ms periods.

• Journal of Korean Society for Quality Management
• /
• v.39 no.3
• /
• pp.412-421
• /
• 2011

In this paper, we introduce Quality of Service(QoS) analytic model of a distributed system that decentralizes the process nodes performing each task and communicates through a network for cooperation. The model advances a service reliability model of Dai et a1.(2003) by means of considering the processing time. The service is assumed to be provided by a centralized heterogeneous distributed system which is composed of some subsystems managed by a control center. The QoS is defined as the probability that a service is provided successfully in an allowed time, we consider the hardware/software reliability and the processing time which include program execution time, data transfer time. We derive the processing time distribution for a required service through convolution of corresponding probability density function. An application example is used to explain the procedure of computing quality of service.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.115-118
• /
• 2004

In this paper, a systematic design approach based on parallel distributed compensation techniques is proposed for anticontrol of chaos in a general continuous-time Takagi-Sugeno (TS) fuzzy system. The verification of chaos in the controlled continuous-time TS fuzzy system is done by the following procedure. First, we establish an asymptotically approximate relationship between a continuous-time TS fuzzy system with time-delay and a discrete-time TS fuzzy system. Then Marotto theorem is applied. The boundedness in the controlled continuous-time TS fuzzy system is also proven via its associated discrete-time TS fuzzy system.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.5
• /
• pp.797-810
• /
• 2010

This study examined perceived discomforts encountered in residential facilities such as individual houses and apartments, and suggested a procedure for improving the problems in the living residence. The participants consisted of two groups of people: normal and underprivileged people; the underprivileged group was classified into 3 sub-groups: elderly people (over 65 years old), handicapped people and pregnant women. To identify inconvenient places and design factors in the residential housing, a total of 200 subjects (50 for each group) participated in the survey using the 7-point Likert scale. As a result, all the user groups mainly answered a high degree of discomfort due to narrow parking places, doorsills, and height differences between floors. The elderly, the handicapped, and the pregnant women replied that it is uncomfortable to use ramps and utility rooms. In a follow-up study, one-to-one in-depth interviews were conducted with some of the participants to analyze the detailed causes of inconvenient places and design factors. This study also suggested the procedure for solving the problems in various design factors from perspective of universal design, by considering prior studies which focused on a certain user group like the elderly. This procedure was suggested to consider as many user groups as possible at the same time. The results can be used to understand the discomforts of various user groups on residential housing. The procedure can also be used to develop universal design guidelines for the living residence.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.4
• /
• pp.328-332
• /
• 2009

Objective : The purpose of this study was to establish new fusion criteria to complement existing Brantigan-Steffee fusion criteria. The primary purpose of intervertebral cage placement is to create a proper biomechanical environment through successful fusion. The existence of a traction spur is an essential predictable radiologic factor which shows that there is instability of a fusion segment. We studied the relationship between the existence of a traction spur and fusion after a posterior lumbar interbody fusion (PLIF) procedure. Methods : This study was conducted using retrospective radiological findings from patients who underwent a PLIF procedure with the use of a cage without posterior fixation between 1993 and 1997 at a single institution. We enrolled 183 patients who were followed for a minimum of five years after the procedure, and used the Brantigan-Steffee classification to confirm the fusion. These criteria include a denser and more mature bone fusion area than originally achieved during surgery, no interspace between the cage and the vertebral body, and mature bony trabeculae bridging the fusion area. We also confirmed the existence of traction spurs on fusion segments and non-fusion segments. Results : The PLIF procedure was done on a total of 251 segments in 183 patients (71 men and 112 women). The average follow-up period was $80.4{\pm}12.7$ months. The mean age at the time of surgery was $48.3{\pm}11.3$ years (range, 25 to 84 years). Among the 251 segments, 213 segments (84.9%) were fused after five years. The remaining 38 segments (15.1%) were not fused. An analysis of the 38 segments that were not fused found traction spur formation in 20 of those segments (52.6%). No segments had traction spur formation with fusion. Conclusion : A new parameter should be added to the fusion criteria. These criteria should be referred to as 'no traction spur formation' and should be used to confirm fusion after a PLIF procedure.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.205-216
• /
• 2014

Multi-camera systems have been widely used as cost-effective tools for the collection of geospatial data for various applications. In order to fully achieve the potential accuracy of these systems for object space reconstruction, careful system calibration should be carried out prior to data collection. Since the structural integrity of the involved cameras' components and system mounting parameters cannot be guaranteed over time, multi-camera system should be frequently calibrated to confirm the stability of the estimated parameters. Therefore, automated techniques are needed to facilitate and speed up the system calibration procedure. The automation of the multi-camera system calibration approach, which was proposed in the first part of this paper, is contingent on the automated detection, localization, and identification of the object space signalized targets in the images. In this paper, the automation of the proposed camera calibration procedure through automatic target extraction and labelling approaches will be presented. The introduced automated system calibration procedure is then implemented for a newly-developed multi-camera system while considering the optimum configuration for the data collection. Experimental results from the implemented system calibration procedure are finally presented to verify the feasibility the proposed automated procedure. Qualitative and quantitative evaluation of the estimated system calibration parameters from two-calibration sessions is also presented to confirm the stability of the cameras' interior orientation and system mounting parameters.