• Korean Journal of Veterinary Research
• /
• v.33 no.1
• /
• pp.43-51
• /
• 1993

Mitochondrial DNA(mt DNA) of Mammalian is the circular one which the 16.5K base pairs and show the maternal inheritance. Evolutional speed of nucleotide sequence is very fast. So that polymorphic analysis of mt DNA provide the useful informations to investigate the genetic relations of interspecies. Authors trials were focussed to compare with the polymorphic differences of mitochondrial DNA between Jindo and Japanese mongrel dogs. DNA was extracted from bloods of 21 head of Jindo dogs and 20 head of Japanese dogs and isolated using 10 kinds of restriction endonucleases(Apa I, BamH I, Bgl II, EcoR I, EcoR V, Hinc II. Hind III, Pst I, Sty I, Xba I) and then separated by the agarose gel electrophoresis. After sourthern blotting hybridization was completed using the mtDNA of Japanese mongrel dogs as a probe. Autoradiography was used to compare the polymorphism of mtDNA both dogs. The results obtained were as follows; 1. mt DNA of Jindo dog showed polymorphism resulting cleavage with four kinds of restriction endonuclease, Apa I, EcoR V, Hinc II, Sty I. While in the Japanese mongrel dogs observed the polymorphism in the five kinds of restriction endonuclease supplemented with EcoR I. 2. Compared with both dogs the frequency differences of DNA polymorphism were recognized in the specific restriction endonuclease Apa I. Consequently in the restriction endonuclease Apa I both dogs classified with three types as A, B, C however in the Jindo dogs frequency of C type was 71.5 percent but in Japanese mongrel dogs observed 45 percent in the A type. 3. DNA polymorphism obtained from the use of five kinds of restriction endonuclease were classified with seven types. In Jindo dogs frequency was highest in the type 6 as 71.4 percent but in the Japanese mongrel dogs showed 35 percent in the type 5. 4. Genetic distances calculated by NEI method showed 0.0089 in Jindo dogs and was 0.0094 in the Japanese mongrel dogs.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.700-708
• /
• 2012

In order to optimize a method to determine the firmness of Chinese cabbage, hardness of midrib tissues was examined based on their chronological order of emergence. Texture measurement using volodkevich bite jaws gave a consistent and highest regression ($r^2=0.85$) between firmness and the order of leaf emergence, while blade set, cylinder probe, and crisp fracture support rig showed a lower coefficient of determination. Thickness of midrib tissue within an individual head from 16 cultivars of Chinese cabbage was positively correlated with the order of emergence, becoming thinner toward inner leaves. Mean thickness of midrib tissue from the head ranged from 7.74 mm for 'CR-shingshing' and 9.28 mm for 'Norangyeorum'. The covariance of leaf thickness within a head was highly cultivar-dependent, ranging from 23.6% for 'Chihili' and 5.8% for 'Bulam'. Firmness of the midrib tissue, defined as maximum peak height per tissue thickness, became higher from outer to inner leaves, showing $2^{nd}$ order of regression. Mean firmness of the midrib tissue from individual head varied from 1.58 N for 'Rangno' to 3.46 N for 'CR-shingshing'. The $10^{th}$ or $11^{th}$ leaf brought the best correlation coefficient (r = 0.81) between firmness of an individual leaf and the mean firmness of the entire leaves in a head, suggesting a reliable and rapid method to estimate the firmness of a head in lieu of examining all leaves in the head. The relationship between firmness of midrib tissue and dry mass ($r=0.70^{**}$) as well as cell wall content ($r=0.58^*$) of the head were positively correlated. Results obtained from the present study suggested that a new method to determine midrib firmness would enable to clarify the relationship between textural quality of fresh Chinese cabbage and their processed product, 'Kimchi'. It will also be important to apply this method to screen textural quality of various genotypes under breeding programs.

• Korean journal of applied entomology
• /
• v.46 no.1 s.145
• /
• pp.123-129
• /
• 2007

An artificial insemination instrument of bumblebee queens was firstly developed. This instrument consists of location tube, transfer tube, holding tube, head product, and probe apparatus for reproductive tract etc. This instrument was designed to minimize stress and damage of reproductive tract of bumblebee queens. The regulator handle apparatus in artificial insemination instrument was used the principle of lever, that manipulates easy, accurate and rapid insemination of bumblebee queens. By using this instrument, the insemination rate was over 90%. This instrument will be useful for the breeding and conservation of excellent character of bumblebees.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.8
• /
• pp.718-723
• /
• 2007

The new concept spark plug was developed to study its influence on the combustion characteristics of SI engine. It has pre-ignition chamber in the lower end of spark plug and flame hole, in which fresh mixture gas can be introduced without any fuel supply system. This spark plug was tested with a commercial SI engine. Fuel consumption rate, emission gas and MBT timing were measured in the engine dynamometer for various flame hole numbers, hole positions, hole sizes of the pre-ignition chamber of the spark plug. And average flame propagation speed was measured by using the head gasket ionization probe in single cylinder engine. The new concept spark plug induces fast bum in combustion compared with the conventional spark plug, and MBT(Minimum advance for Best Torque) timing was retarded about $3{\sim}5^{\circ}$ crank angle. The flame hole number, hole direction and volume of pre-ignition chamber were found to influence the combustion characteristics.

• Journal of the Korean Magnetic Resonance Society
• /
• v.20 no.1
• /
• pp.27-35
• /
• 2016

NMR spectrometer has been regarded as essential tool for structure elucidation in variable scientific field as like organic synthesis, natural product and macro protein research. Also NMR can be applied for defining dynamic behavior like ligand and receptor binding. One of advantage of research with NMR is that to be great confident to confirm structure and the measured sample could be recovered. Nevertheless NMR also has a weak points than other spectroscopic methods that require a lot of time for interpreting acquired spectrum and running time due to low sensitivity. For last two decade Bruker has developed hardware and software solution for overcome those weak points. In order to overcome low sensitivity Bruker introduced Cryo and Micro diameter probe head technology. And researcher can reduce the time for routine spectrum processing and interpretation works due to lots of introductions in software solutions for quantification, identification and statistics analysis. With four examples, this article describing those new hardware and software solutions in field of recent pharmaceutical research as follows. - New Horizons for NMR in the Biopharmaceutical Industry - The development and application of solid-state NMR spectroscopy (SSNMR) in pharmaceutical analysis - Assisted NMR Data Interpretation in Synthetic Chemistry - Complete Analysis of New Psychoactive Substances Using NMR.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.266-268
• /
• 2006

The effects of the brazing temperature and homogenizing time for brazed specimens on the joint of Ni-based superalloys such as Haynes 250, Inconel 617 and Hastelloy-X were investigated. The brazing alloy is nickel base MBF 15. The foil had a thickness of $38{\mu}m$, which was used two sheets of that for the all experiments. The experimental brazing was carried out by a brazing process in a vacuum of approximately $2{\times}10^{-5}$ Torr, an applied pressure of about 0.74MPa and the three kinds of brazing temperatures were 1100, 1150, and $1190^{\circ}C$ for a holding time of 5 to 1440 minutes. Microstructural observations were made on the cross-sectional samples by using an optical microscope(OM), scanning electron microscope(SEM), and electron probe X-ray microanalyzer(EPMA). The tensile tests were performed at room temperature with a cross head speed 1.5 mm/min according to ASTM E8M. The results show that excellent joint tensile strengths of as high as 788MPa were obtained when processed at $1190^{\circ}C$ for 5 minutes.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.27-32
• /
• 1995

Magnetic Resonance Imaging anti-solenoid probes have been constructed for the internal imaging. Signal-to-noise ratios of the images acquired by the anti-solenoid probes were compared with those obtained by commercial probes such as a head coil and a body coil. In terms of the internal imaging, the anti-solenoid probes, constructed in the present study, was performed better than the conventional commercial probes. Also, RF(radio-frequency)-field maps produced by the anti-solenoid probes have been simulated using computers. The possibility of human internal imaging using the anti-solenoid probes has been discussed as well.

• International Journal of Automotive Technology
• /
• v.6 no.2
• /
• pp.133-139
• /
• 2005

In this study, a three-dimensional transient simulation with a knock model was performed to predict knock occurrence and autoignition site in a heavy-duty LPG engine. A FAE (Flame Area Evolutoin) premixed combustion model was applied to simulate flame propagation. The coefficient of the reduced kinetic model was adjusted to LPG fuel and used to simulate autoignition in the unburned gas region. Engine experiments using a single-cylinder research engine were performed to calibrate the reduced kinetic model and to verify the results of the modeling. A pressure transducer and a head-gasket type ion-probe circuit board were installed in order to detect knock occurrences, flame arrival angles, and autoignition sites. Knock occurrence and position were compared for different piston bowl shapes. The simulation concurred with engine experimental data regarding the cylinder pressure, flame arrival angle, knock occurrence, and autoignition site. Furthermore, it provided much information about in-cylinder phenomena and solutions that might help reducing the knocking tendency. The knock simulation model presented in this paper can be used for a development tool of engine design.

• Implantology
• /
• v.22 no.4
• /
• pp.210-218
• /
• 2018

Purpose: The purpose of this study was to investigate the validity and reproducibility of a method based on cone-beam computed tomography (CBCT) technology for the visualization and measurement of gingival soft-tissue dimensions. Material and Methods: A total of 66 selected points in soft-tissue of the ex vivo head of an adult pig were investigated in this study. For the measurement of radiographic thickness (RT), wet soft-tissue surfaces were lightly covered with barium sulfate powder using a powder spray. CBCT was taken and DICOM files were assessed for soft-tissue thickness measurement at reference points. A periodontal probe and a rubber stop were used for the measurement of trans-gingival probing thickness (TPT). After flap elevation, actual thickness of soft-tissue (actual thickness, AT) was measured. Correlation analysis and intraclass correlation coefficients analysis (ICC) were performed for AT, TPT, and RT. Results: All variables were distributed normally. Strong significant correlations of AT with RT and TPT values were found. The two ICC values between TPT vs. AT and RT vs. AT differed significantly. Conclusion: Our results indicated that correlation of RT was stronger than that of TPT with AT. We concluded that soft tissue measurement with CBCT could be a reliable method, compared to the trans-gingival probing measurement method.

• Korean Journal of Head & Neck Oncology
• /
• v.25 no.2
• /
• pp.138-142
• /
• 2009

Introduction : Although bilateral exploration has been thought to be the standard therapeutic modality for primary hyperparathyroidism(pHPT) due to the admirable cure rate, questions have remained as to whether bilateral neck exploration for all patients with pHPT is needed because 80-85% of patients with pHPT have a single parathyroid adenoma. If the diseased parathyroid can be determined preoperatively, a directed and minimal operation is appropriate using the recent innovations of preoperative diagnosis and operation techniques for parathyroid diseases, the radio-guided parathyroid surgery(RGPS) is one of the standards. In especial, RGPS has been reported beneficial in special circumstances, such as in recurrent disease, ectopic parathyroid, and in mediastinal parathyroid. It can be also useful for the parathyroid disease in previously explored or irradiated neck. Material and Methods : We experienced 2 cases of pHPT successfully treated by RGPS in who previously underwent extensive neck dissection and concomitant external or internal radiotherapy. We adopted and modified the technique described by Dr. James Norman at the University of South Florida-the minimally invasive parathyroidectomy using intraoperative nuclear mapping with 99mTc-sestamibi scanning and radioactivity detection probe. Results : We acquired the successful results for these patients. Conclusion : RGPS is thought to be the alternative technique for the patients with prior central neck exploration and irradiation.