• Journal of Information Display
• /
• 제7권4호
• /
• pp.1-4
• /
• 2006

The optical performances of rounded prism films were investigated using a ray tracing technique. The angular distribution of the luminous intensity was obtained as functions of the prism pitch and the curvature of rounded apex and valley of prism arrays. The gain of the on-axis luminance decreased with decreasing curvature (increasing diameter) and pitch. The existence of the curved area on the prism film decreased the recycling efficiency of the prism film, i.e., the rays which would otherwise have been recycled through total internal reflections via the prism surfaces were refracted on the curved regions and redirected toward directions other than the on-axis direction. Quantitative correlation between the luminance gain and the curvature in addition to the prism pitch was obtained, which might serve as basic data for the optimization of prism films and the manufacturing processes.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.799-806
• /
• 2016

We present a polarization-dependent prism array film for controlling the viewing angle distribution of liquid crystal (LC) display panels without loss of light efficiency. On a directional backlight unit, our polarization-dependent prism array film, made into a stacked bilayer with a well-aligned liquid crystalline reactive mesogen (RM) layer on the UV-imprinted prism structure, can continuously control the light refraction function of the prism array by electrically switching incident polarization states of a polarization-controlling layer prepared by a twisted nematic LC mode. The viewing angle control properties of the polarization-dependent prism array film are analyzed under different prism angle and refractive index conditions of the RM layer. A simple analytic model is also presented to describe the intermediate viewing angle distributions with continuously varying applied voltages and incident polarization states.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.290-291
• /
• 2001

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.11-14
• /
• 2017

본 논문은 프리즘 구조물의 집광효과를 이용하여 옥외용 사이니지 이산형 LED 패널의 광학적 불연속성을 개선할 수 있는 방법적 접근에 관한 것이다. 광투과성이 우수한 Polycarbonate에 MEMS(Microelectromechanical systems) 공정 및 극초단파(Femto-second) 레이저를 이용하여 프리즘 형태를 패터닝을 하였다. 패터닝된 polycarbonate는 light guide film의 역할을 하여 서로 다른 디스플레이 패널에서 발생하는 빛을 프리즘 구조에 의해 한 곳으로 모이게 함을 확인하였다. Polycarbonate와 디스플레이 패널의 간격에 따라 디스플레이 패널간의 거리를 조절할 수 있었으며 한 곳으로 모인 빛은 마치 두 디스플레이 패널이 연결된 것과 같은 효과를 나타내었다. 이는 아웃도어 사이니지용 디스플레이 패널에서 발생하는 문제점인 광학적 불연속성을 개선할 수 있을 것으로 보인다.

• 한국광학회지
• /
• 제31권6호
• /
• pp.321-327
• /
• 2020

기판 위에 코팅된 박막의 빛 반사 특성에 대해 연구하였다. 입사 매질로 굴절률이 큰 프리즘을 사용하여 박막/기판 계의 내부 전반사 현상과 공기/박막/기판 계가 이루는 도파로로 빛이 결합되어 들어가는 현상을 종합적으로 비교, 연구하였다. 박막의 굴절률이 기판의 굴절률보다 큰 경우에는 빛의 입사각을 증가시켜 나가면 먼저 기판에 의한 전반사가 일어나고, 그 이후 도파로 모드를 맞추는 좁은 각 영역에서 반사율이 떨어지는 현상을 볼 수 있으며, 이것을 이용하여 박막의 굴절률과 두께를 정확히 측정할 수 있다. 반면에 박막의 굴절률이 기판의 굴절률보다 작은 경우에는 도파로 모드가 존재하지 않는다. 이 경우 덩어리 매질에서처럼 뚜렷하지는 않지만 박막에 의한 전반사가 간섭무늬를 동반하여 나타난다. 본 연구에서는 프리즘/박막/기판 구조에서 일어나는 반사 현상을 전반적으로 관측하고 분석하여, 두 경우 모두 박막의 굴절률을 측정할 수 있는 가능성을 조사하였다.

• KIEAE Journal
• /
• 제2권1호
• /
• pp.49-54
• /
• 2002

Solar daylighting system provides free and comfort lighting, but its cost has been key issue due to difficult design and control of the heavy light collecting system. One of the solutions for the heavy design issues would be using a light framed film such fresnel and prism lens. Prism light guide luminaires have for some time been used to distribute light when it is desirable to have remote light sources. These systems are helpful when it is desirable to have fewer light sources, and/or to position light sources in places where lamp maintenance is easier, or electrical hazard is reduced. This proposed prototype system consists of light collector, light transformer and light pipe.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.169-174
• /
• 2015

The optical film for light luminance improvement of BLU that is used in LCD/LED and retro-reflective film is used as luminous sign consist of square and triangular pyramid structure pattern based on V-shape micro prism pattern. In this study, we analyzed machining characteristics of Cu-plated flat mold by shaping with diamond tool. First, cutting conditions were optimizing as V-groove machining for the experiment of micro prism structure mold machining with prism pattern shape, cutting force and roughness. Second, the micro prism structure such as square and triangular pyramid pattern were machined by cross machining method with optimizing cutting conditions. Burr and chip shape were discussed with material properties and machining method.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.609-614
• /
• 2020

3 mol% yttria-doped stabilized zirconia (3YSZ) is synthesized by a solvothermal process, and its characteristics are investigated using various methods. Also, the dispersibility of synthesized 3YSZ nanoparticles is observed with the species of surface modifier. The 3YSZ nano sol prepared with an optimum condition is employed in prism coating and its properties are evaluated. The synthesized 3YSZ nanoparticles show a globular shape with about 10 to 20 nm crystallite size. The mixed phases with the nano sol show a high specific surface of 178 ㎡/g. The prism sheet coated with the 3YSZ nano sol present an excellent refractive index, transmittance, and luminance; refractive index is 1.603, transmittance is 90.2 %, and luminance of coating film is improved by 5.9 % compared to that of the film without 3YSZ nano sol. It is verified that the surface modified 3YSZ is suitable as the prism sheet for optical displays.

• Journal of the Optical Society of Korea
• /
• 제12권1호
• /
• pp.25-30
• /
• 2008

The optical performances of 15-inch edge-lit backlight were simulated by using a Monte Carlo ray-tracing technique. The backlight model was built by combining a wedge-type light guide plate, a diffuser sheet, a tubular fluorescent lamp with a lamp reflector, and two crossed prism sheets. Angular distributions of the luminance on each optical component obtained from simulation were consistent with those obtained from experiments on a real 15-inch backlight. The constructed backlight model was used to evaluate the optical performances of a micro-pyramid film. It was found that the on-axis luminance gain on the pyramid film is higher than that on one prism film but much lower than that on the two crossed prism films. These results suggest that a reliable simulation model can be used to develop new hybrid films and to optimize the optical structure of edge-lit backlight in order to reduce the developmental period.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.76-76
• /
• 2008

The resonance properties due to the surface plasmon(SP) excitation of metal nanoparticles make the nanocomposite films promising for various applications such as optical switching devices. In spite of the well-known ultra-sensitive operation of optical switches based on a guided wave, the application of nanocomposite film(NC) has inherent limitation originating from the excessive optical loss related with the surface plasmon resonance(SPR). In this study, we addressed this problem and present the experimental and theoretical analysis on the pump-probe optical switching in prism-coupled Au(1 vol.%):$SiO_2$ nanocomposite waveguide film. The guided mode was successfully generated using a near infrared probe beam of 1550 nm and modulated with an external pump beam of 532 nm close to the SPR wavelength. We extend our approach to ultra-fast operation using a pulsed laser with 5 ns pulse width. To improve the switching speed through the reduction in thermal loading effect accompanied by the resonant absorption of pump beam light, we adopted a metallic film as a coupling layer instead of low-index dielectric layer between the high-index SF10 prism and NC slab waveguide. We observed great enhancement in switching speed for the case of using metallic coupling layer, and founded a distinct difference in origin of optical nonlinearities induced during switching operation using cw and ns laser.