• 대한의생명과학회지
• /
• 제1권1호
• /
• pp.73-79
• /
• 1995

자동혈구분석기(Technicon $H^*2$ )에 의한 혈액검체의 측정전 mixing횟수가 검사결과에 미치는 영향을 평가하기 위하여 19가지 parameter를 대상으로 초기측정치에 대한 반복측정치의 변화율을 종속변수로 하여 단순회귀분석을 실시하였다. Mixing횟수가 증가할수록 RBC, Hct, MCV는 통계적으로 유의하게 (p< .01)감소하였고, 호염기구 백분율은 유의하게(p< .05)증가하였으므로 평가된 19가지 parameter의 21%인 4가지 검사항목에서 변화가 있었다.

• 폴리머
• /
• 제25권5호
• /
• pp.707-718
• /
• 2001

폴리프로필렌 (PP)은 낮은 밀도, 우수한 내열성, 내화학성, 가공성과 더불어 재활용이 용이한 플라스틱이다. 하지만 폴리프로필렌의 발포에 대한 연구는 그리 많지 않다. 본 연구에서는 화학적 발포제를 사용하여 발포 폴리프로필렌을 만들고자 하였다. 폴리프로필렌의 가공온도에서 유동성과 발포체의 유연성을 높이기 위해 에틸렌/옥텐 공중합체 (mPE)를 폴리프로필렌에 용융 블렌드하였다. 발포에 앞서 발포체의 발포배율과 셀구조에 미치는 상분리 거동의 영향을 알기 위해 PP/mPE 블렌드 상분리 거동을 조사하였다. PP/mPE 블렌드의 강 거동은 블렌드 조성과 mixing torque ratio, 그리고 mixing rpm에 영향을 받았다. PP 기질에 mPE가 분산상으로 존재하는 블렌드를 발포시켰을 때 높은 배율과 안정한 셀 구조를 가지는 발포체를 얻을 수 있었다.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.33-39
• /
• 2023

In this study, the effect of mixing condition of raw material powders possessing various particle size and particle size distribution on thermite reaction efficiency was investigated. When fine raw powders are used, rather the reaction yield tends to decrease due to agglomeration. In contrast, coarse raw powders make deteriorate the contact area between raw material powders containing Al reducing agent. To ensure the optimal thermite reaction efficiency, it is required to optimize a mixture condition of raw material powders prior to thermite reaction. From the current experiment, the maximum thermite reaction efficiency is 77%, which came from Nb₂O₅ + NiO +Al mixtures with size distribution from 9.25 to 22.63 ㎛.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.972-978
• /
• 2008

Quality Assurance of Deep Mixing to fulfill the requirements of geotechnical design cannot be achieved only by the process control During production conducted by the deep mixing contractor but it should involve relevant activities that are carried out prior to, during and after the construction by all the parties involved in a deep mixing project. The requirement is different for different application, and hence, QA/QC method/procedure and verification technique may be different for different application. In order to maintain the high quality of deep mixing work in the global market, it is necessary to conduct a research project, such as investigation of illustrations, the variety of existing QA/QC methods/procedures, the correlation between the outcomes of different QA/QC methods. In these reason, it has been held the international meeting to discuss them, in that kind of activities in 2009 it will be held Symposium. Also Collaborative study for QA/QC is on goin, and conduction by all participated members. The subject for collaborative study are, task 1 : investigation of laboratory tests procedures, task 2 : comparing of different laboratory tests procedures, task 3 : QA/QC method/procedures, task 4 : integrated Task1 ~task 3. The discussion of the results in all task will be held in the Symposium separately. In this paper, it was presented four tasks. Also the results in task 1 and 2 conducting domestically until now, such as investigation of laboratory test procedures, effect on the unconfined compressive strength by aging temperature and by delayed time.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.459-469
• /
• 2009

It is well known that coagulation pretreatment can reduce foulants prior to membrane filtration. The purpose of this research was to investigate the effects of coagulation on fouling of ceramic microfiltration membrane($0.1 {\mu}m$) using pilot plant of $150m^3/day/train$ capacity. Train A membrane system has pretreatment process of ozonation and coagulation while train B has only coagulation. Two types of coagulation operation were investigated: back mixer(rapid mixing with or without slow mixing) which is a conventional mechanically stirred mixer and an inline static mixer. Ozone dose rate for train A was 1 mg/L and ozone contact time was 12 min. The coagulation dose(PACl 10% as $Al_2O_3$) rate was changed 20~40 mg/L according to experimental schedule. In this experimental conditions, the coagulation of back mixer type with rapid mixing(GT=72,000) and slow mixing(GT=45,000) was the best effective in reduction of ceramic membrane fouling regardless preozonation. Especially, the effect of inline static mixer was sensitive to change in water quality. Ozonation mainly affected irreversible fouling rather than reversible fouling in accordance with less adsorption of NOM on the membrane surface. Thus, the increase rate of the nomalized TMP(trans membrane pressure) at $25^{\circ}C$ for train A was relatively lower than that of train B under same coagulation process with same coagulant dosage. The best performance of ceramic membrane appeared in case of combined process with ozonation, therefore this integrated process is able to archive less coagulant dosing and secure a stability of ceramic membrane system.

• 대한치과보철학회지
• /
• 제39권5호
• /
• pp.492-501
• /
• 2001

The use of alginate impression materials today is prevalent because of its efficiency and simplicity in clinical settings. Unfortunately, the simplicity of the procedure tends to lull the dentist into a sense of well-being, and lead him into using careless or sloppy technique. Alginate impression materials are used to fabricate diagnostic and preliminary casts, and the final cast. Incorrect use of this material is known to affect the accuracy of the final prosthesis. The purpose of this study was to compare the effect of different mixing methods of alginate impression material and tray adhesive on the accuracy of the stone cast produced by each method. A total of 30 stone casts were produced by using 3 different types of mixing methods (10 stone cast for each mixing method, respectively). The first method utilized an automatic-mixing machine to mix alginate while the second method was carried out manually, strictly following manufacturer's instructions. The third method also involved manual mixing, but did not follow the manufacturer's instructions and was done in a random fashion. Also, 20 additional stone casts were produced by using alginate with or without tray adhesives were included in the study to evaluate effects of tray adhesives on the accuracy of alginate impression. 10 stone casts were produced by adding tray adhesives to the interior surface of the impression tray prior to taking the impression. The other 10 excluded this step. A total of 50 stone casts were analyzed by the three-dimensional measuring machine to measure and compare the dimensional changes of the impression material of each group. The results are as follows. 1. No significant difference was found between the automatic mixing group and the manually-mixing group(p>0.05). 2. For the group that followed manufacturer's instructions, less dimensional changes were record ed than the group that didn't in measuring distanced 4(p<0.05). 3. The group that used tray adhesives showed less dimensional changes(p<0.05). The findings revealed that mechanical methods of mixing alginate impression materials had little influence on dimensional changes. However, it is proven that following manufacturers instructions in alginate impression taking is an important step in acquiring accurate impressions and tray adhesives may play an important role in enhancing the results.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1997년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.34-34
• /
• 1997

The effect of alloying mode and porosity on the axial tension-tension fatigue behavior of a P/M steel of nominal composition Fe-4w/o Ni-1.5w/o Cu-O.5w/o Mo-O.5w/o C has been evaluated. Alloying modes utilized were elemental powder mixing, partial alloying(distaloy) and prealloying by water atomization; in each case the carbon was introduced as graphite prior to sintering. Powder compacts were sintered($1120{\circ}C$/30 min.) in 7Sv/o $H_2$/25v/o $N_2$ to densities in the range 6.77-7.2 g/$cm^3$. The dependence of fatigue limit response on alloying mode and porosity was interpreted in terms of the constituent phases and the pore and fracture morphologies associated with the three alloying modes. For the same nominal composition, the three alloying modes resulted in different sintered microstructures. In the elemental mix alloy and the distaloy, the major constituent was coarse and fine pearlite, with regions of Ni-rich ferrite, Ni-rich martensite and Ni-rich areas. In contrast, the prealloy consisted primarily of martensite by with some Ni-rich areas. From an examination of the fracture surfaces following fatigue testing it was concluded that essentially all of the fracture surfaces exhibited dimpled rupture, characteristic of tensile overload. Thus, the extent of growth of any fatigue cracks prior to overload was small. The stress amplitude for the three alloying modes at 2x$l0^6$ was used for the comparison of fatigue strengths. For load cycles <3x$l0^5$, the prealloy exhibited optimum fatigue response followed by the distaloy and elemental mix alloy, respectively. At load cycles >2x$l0^6$, similar fatigue limits were exhibited by the three alloys. It was concluded that fatigue cracks propagate primarily through pores, rather than through the constituent phases of the microstructure. A decrease in pore SIze improved the S-N behavior of the sintered steel.

• 동아시아식생활학회지
• /
• 제20권2호
• /
• pp.321-327
• /
• 2010

Two different mixing ratios of Rosa rugosa and Rubus crataegifolius (Korean raspberry), including Rosa rugosa and one part Rosa rugosa vs five parts Rubus crataegifolius were prepared, and their fermentation characteristics were investigated during 28 days of ethanol fermentation and subsequent aging. The final $^{\circ}Brix$ and pH of Rosa rugosa wine were 12.0 and 2.9, respectively, while those of Korean raspberry-Rosa rugosa wine were $7.0^{\circ}Brix$ and pH 3.4, respectively. The final ethanol contents were 5.0% (v/v) in Rosa rugosa wine and 9.8% in Korean raspberry-rugosa wine. The level of antocyanine content, color intensity, organic acid, and free amino acid concentrations in Rosa rugosa wine were lower than those of Korean raspberry-Rosa rugosa wine. Thus, our results demonstrate that supplementation of Rosa rugosa with Korean raspberry prior to alcohol fermentation may help improve the fermentation characteristics of Rosa rugosa wine in the final product.

• 한국결정성장학회지
• /
• 제27권1호
• /
• pp.34-41
• /
• 2017

본 연구는 아연결정 Willemite($Zn_2SiO_4$)유의 합성에서 소성 전의 전처리 과정이 결정의 결합반응에 미치는 영향을 규명하고자 한다. 시료 전처리 방법으로 원료의 체거름과 초음파분산실험을 통해서 실험 분석하였다. 그 결과, 기본유시료의 체거름과 초음파분산은 물리적 공정만으로 Zn-Si 결합이 용이하도록 Si 본딩에 변화를 가져와 저온($680^{\circ}C$)에서부터 willemite의 생성을 촉진시켰다. 원료의 분산은 체거름 만으로도 willemite의 저온 생성을 촉진시키는 것으로 나타났으며 특히 초음파 분산 실험의 결과는 willemite생성의 저온 반응에 효과가 더욱 극명하게 나타났다. 이러한 비 소성 전 처리 공정에 의한 결정생성은 경제적으로도 큰 가치가 있을 것으로 판단된다.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.15-24
• /
• 2013

Numerical studies were conducted to investigate the internal flow field and combustion characteristics of DISI engine with methanol blended in gasoline. Dual injection was applied and the characteristics were compared to single injection strategy. The amount of the fuel injection was corresponded to air-fuel ratio of each fuel for complete combustion. The preforming model in this study, software STAR-CD was employed for both modeling and solving. The operating speed condition were at 4000 rpm/WOT (Wide open throttle) where the engine was fully warmed. The results of single injection with M28 showed that the uniformity, equivalence ratio, in-cylinder pressure and temperature increased comparing to gasoline (M0). When dual injection was applied, there was no significant change in uniformity and equivalence ratio but the in-cylinder pressure and temperature increased. When M28 fuel and single injection was applied, the CO (Carbon monoxide) and NO (Nitrogen oxides) emission inside the combustion chamber increased approximately 36%, 9% comparing with benchmarking case in cylinder prior to TWC (Three Way Catalytic converter). When dual stage injection was applied, both CO and NO emission amount increased.