• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1015-1017
• /
• 2003

In a research and development team of high temperature superconducting (HTS) transformer for power distribution, prior to manufacture a single phase 1MVA 22.9 kV/6.6 kV HTS transformer, a 1MVA transformer for insulation test with windings made of copper tapes with the same size as BSCCO-2223 HTS tape was manufactured. The test transformer was composed of both the copper windings of double pancake type and the shell type core of laminated silicon steel plates. The characteristics tests of the test transformer were performed, such as no load test, load test and short test at 77k using liquid nitrogen. Insulation tests, lightning impulse test, power-frequency voltage test and external insulation test, were accomplished also.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.409-412
• /
• 2007

A motorcycle helmet is the best means to protect the head of bike's driver and it is directly connected to a driver's life. Prior to producing of the helmet, it has to be passed the process of impact test to evaluate of its safety. This test evaluates peak acceleration and H.I.C (Head Injury Criteria). This paper analyzes impact test with finite element method to find the behavior of helmet during the test. Also, the effect of impact sites on the helmet was evaluated to improve the thickness distribution of the helmet.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.2
• /
• pp.68-72
• /
• 2004

The performance of copper-tungsten for electrodes used in an ultra high voltage interruption system was evaluated by means of an interruption test, which requires a large-scale apparatus and high cost. In this study, prior to the interruption test, the characteristics of a Cu-W electrode were estimated through the DC arc test, which is a simple, low cost procedure. The DC arc characteristics of a 20wt%Cu-80wt%W electrode were investigated with the change of tungsten powder size distribution and the addition of nickel. In specimens containing a high volume fraction of large sized tungsten particles, the relative density and hardness of sintered Cu-W electrodes increased while the electrical conductivity and the DC arc resistance decreased. Furthermore, the relative density became enhanced with the increase of the amount of nickel while the hardness and electrical conductivity diminished and the DC arc resistance worsened.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.155-157
• /
• 2005

The Electrical Test Bed(ETB) integrates the test environment, required for acceptance tests of system level, prior to FM testing. The ETB will be used for the validation of system-level functions and interface between each subsystem. The FTB supports early functional and limited performance checkout of electrical subsystems. Therefore, it provides the environment for the verification of the Flight Software including AOCS, EPS, and TC&R simulators. These ETB will be composed of engineering version of spacecraft BUS, which are laid on the laboratory table.

• Transactions of Materials Processing
• /
• v.16 no.5 s.95
• /
• pp.370-374
• /
• 2007

A motorcycle helmet is very essential to protect the head of driver and it is directly connected to driver's life. Prior to producing the helmet, it has to be passed the process of impact test to evaluate its safety. This test evaluates peak acceleration and head injury criteria (H.I.C.). This paper simulates the impact test with finite element method to find the behavior of helmet during the test. Also, the effect of impact sites on the helmet was evaluated to improve the thickness distribution of the helmet.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.49-52
• /
• 2007

Vacuum facility is required for high altitude space environment test to develop small thruster. We, at Chungnam National University, developed vacuum test facility up to $10^{-5}$ torr to simulate $100{\sim}120km$ altitude environment. Prior to operation, we predict vacuum pump performances and present preliminary calculation and experiments.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.1
• /
• pp.1-12
• /
• 1992

In this study, the self test-system for the marine Gyrocompass was developed and the obtained results are summarized as follows : 1) Utilizing the newly developed self-test system, the time length for observing the transient state of Gyrocompass reading which has been over 4 hours can be reduced to less than 20 minutes. In addition, the dynamic characteristics of the Gyrocompass can be measured within 2 hours after starting the system. 2) Prior test and diagnosis was done by checking all parameters recurrently with period of 2.5minutes. 3) Testing and diagnosis results was shown in graphic mode and could be transmitted to INMARSAT unit using personal computer. 4) The results of the newly designed trouble algorithm for the system was found to be applicable under arbitrary given conditions.

• Communications for Statistical Applications and Methods
• /
• v.26 no.5
• /
• pp.473-495
• /
• 2019

In this paper, a new extension of Lindley distribution has been introduced. Certain characterizations based on truncated moments, hazard and reverse hazard function, conditional expectation of the proposed distribution are presented. Besides, these characterizations, other statistical/mathematical properties of the proposed model are also discussed. The estimation of the parameters is performed through different classical methods of estimation. Bayes estimation is computed under gamma informative prior under the squared error loss function. The performances of all estimation methods are studied via Monte Carlo simulations in mean square error sense. The potential of the proposed model is analyzed through two data sets. A modified goodness-of-fit test using the Nikulin-Rao-Robson statistic test is investigated via two examples and is observed that the new extension might be used as an alternative lifetime model.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.50-57
• /
• 2021

Engine cool down process is necessary for the liquid rocket engines using cryogenic propellants in order to meet the requirement of engine inlet temperature. This paper evaluates the cool down characteristics of oxidizer supply pipeline and engine in prechill process prior to the engine firing tests, and calculate the quantity of liquid oxygen consumption.

• Journal of the Korean Society of Physical Medicine
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2024

PURPOSE: This pre-post intervention study aimed to examine the effects of a 12-week supervised modified Taekwondo exercise program on the functional fitness of community-dwelling older adults. METHODS: 10 participants (mean age: 72.3 ± 4.6 years) completed the program over a 12-week period. The intervention consisted of Taekwondo-based exercises modified for older persons. Changes to functional fitness were measured using the finger-to-nose test, functional reach test, timed up and go test, 30-second sit-to-stand test, 30-second arm curl test, Chester step test, chair sit-and-reach test, and back scratch test. Participants were assessed prior to the training and after the final training session, changes were measured using descriptive statistics and paired sample 't' tests. RESULTS: Effect sizes ranged from small to large (Cohen's d = .22 to 1.23). The exercise program was well- tolerated by participants, with a high level of engagement and no attrition for the duration of the program. Results showed significant improvements in most measures of functional fitness (p < .05) except for the back scratch test (p = .051). CONCLUSION: These findings suggest a well-designed, supervised, modified Taekwondo exercise program can significantly improve functional fitness in older adults.