• Journal of Dental Anesthesia and Pain Medicine
• /
• 제17권1호
• /
• pp.55-59
• /
• 2017

Digital dentistry has influenced many dental procedures, such as three-dimensional (3D) diagnosis and treatment planning, surgical splints, and prosthetic treatments. Patient-specific protective appliances (PSPAs) prevent dental injury during endotracheal intubation. However, the required laboratory work takes time, and there is the possibility of tooth extraction while obtaining the dental impression. In this technical report, we utilized new digital technology for creating PSPAs, using direct intraoral scanners and 3D printers for dental cast fabrication.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.125-132
• /
• 2011

Is very simple in tension work of screen mesh for effective printing if worker uses screen mesh of player who desire at screen print process. General method is methods that use mesh of player who want on screen frame as screen plate because tensioned. The single layer screen plate was made from one sheet screen mesh and the double layer screen plate was made from two sheets screen mesh overlapped. The thickness of sensitive emulsion applied to double layer screen plate is more thicker than two time s of thickness of emulsion applied to single layer screen plate. It seems that the sensitive emulsion inserted between an upper layer and a lower layer of double layer screen mesh.

• 한국문헌정보학회지
• /
• 제14권
• /
• pp.131-148
• /
• 1987

The Yi-Dynasty published the calendars printed by means of woodblock and typeprinting for the purpose of informing its people of four seasonal changes and appropriate time for farming. The printing types were used to publish the calendars in those days varied depending upon the kinds of the calendars, but all those types are known as only one name: Kwansanggam Type. This is because there have been little studies on the different kinds of printing types. As a result, there are many cases where the libraries make erroneous notes in their catalogues. This study points up the fact that four different kinds of Kwansanggam Type were used depending upon the nature of the calendars. For classification purpose, I call these types Daetongryokja, Naeyongsamsoja, Myongsiryokja, and Chiljongryokja. What has not been revealed in this study can be further explained as the more calendars of those days are found out.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.787-790
• /
• 2006

This paper analyzes the principle and feature of the piezoelectric ceramic print head for the image printing of industrial inkjet plotter, and apply the Drop-on-Demand method that can adjust an ink drop size in accordance with the certain time adjustment. In order to do this study, drive frequency is selected at maximum 8.3[kHz] which can be operated within resonance frequency range of the piezoelectric ceramic. Drop controlling was realized according to pulse waveform the drive voltage, and grey-scale and satellite diminution method were applied for printing of high resolution image. A feasibility study of the result will be demonstrated by constructing the experiment equipment.

• 한국인쇄학회지
• /
• 제24권2호
• /
• pp.35-48
• /
• 2006

Textile decalcomania printing is how after the disperse dye which is melting and vaporizing absorbs on the surface of the cloth, it colors by permeating into the cloth inside. So it has applied a lot to the synthetic fiber like polyester. However, because there is no showing right temperature and time in case of printing on the polyester fiber and the microfiber, this study aims at it. The experimental methods are like this : first measuring the density for the objective judgment, and measuring colors with the colorimeter, and then study for the color reproduction through a visual evaluation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.142-144
• /
• 2009

We demonstrated narrow and good aspect-ratio inkjet-printed silver lines with multi-time over-printing methods. By using this strategy, narrow silver lines were obtained with 200 nm thickness and their width and gap between printed lines of uniform narrow silver lines were 30 ${\mu}m$ and 17 ${\mu}m$, respectively. It also had good conductivity, sheet resistacne of 0.36 ${\Omega}/{\square}$ and specific resistance of $8{\mu}{\Omega}{\cdot}cm$. In current stress test, narrow silver line with 30 ${\mu}m$ width was able to a current flow up to 50 mA (2.1A/$cm^2$). Using surface treatment on poly-arylate substrate with $UVO_3$, we obtained clean-edge narrow line without any edge waviness.

• 한국의류산업학회지
• /
• 제3권4호
• /
• pp.373-377
• /
• 2001

When the polyester/cellulosic fiber mixed fabrics were treated with sodium hydrogensulfate for burn-out printing, it is examined how the effects of process conditions as concentration of acid, fixation temperature and fixation time act onto the properties of the polyester ground fabrics. The print paste, indalca solution, was mixed with sodium hydrogensulfate and glycerine, and then screen-printed on the fabrics. The properties of the polyester ground fabrics after removing away the cellulosic fibers were investigated. The yellowness index and the breaking load of polyester ground fabrics affected by the process conditions, especially dry heat fixation temperature.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 춘계 학술발표회 논문집
• /
• pp.25-34
• /
• 2000

Recently, color proofing in printing industry grow rapidly. If an order decide color from known color information in the case of color reproduction, we can reduce expenses and time. In color proofing the best important point must be closed proofed color to primary color and secondary color. Model-based approaches have the advantages of faster recharacterization and the opportunity of simulating product enhancements such as changes in ink properties and halftoning. In this paper, we transformed the dot area of CMYK to CIELAB color space using color reprodution models. Firstly, we measured spectral reflectance of primary color printed by Matchprint II and the data was used to find tone reproduction curve using regression equation, and than we applied at primary color model, such as Murray-Davies, Yule-Nilsen, and mixed color model, such as Kubelka--Munk, relaxed version of spectral Neugebauser. In such results, the Kubleka-Munk model resulted in the best spectral reconstruction accuracy followed by relaxed version of spectral Neugebauer model, color difference is 2.8401.

• 한국인쇄학회지
• /
• 제18권2호
• /
• pp.83-101
• /
• 2000

In this experiment butadiene rubber(BR)/acrylonitrile butadiene rubber(NBR) blends was prepared and then the applicability of BR/NBR blends as printing rubber roller was examined. With the aid of open 2-roll mill, BR, NBR and another chemical additives were compounded. Then rubber vulcanizates were manufactured by hot press and maximum torque, Mooney viscosity, mechanical properties and oil resistance of the test specimens were measured. With prolonged oil aged treating time, BR/NBR blends became soft and so the hardness of blends decreased. It could be explained by the swelling of rubber matrix with oil penetration in to rubber molecules. The undesirable low value of oil resistance of BR was significantly improved by blending BR with NBR.

• 대한지역사회영양학회지
• /
• 제5권2호
• /
• pp.208-216
• /
• 2000

This study is a part of a software program which was developed for efficient foodservice management of elementary school foodservice. The foodservice management system consists of general information, manu planning, inventory management, and printing of results. Advantages of software programs developed in this study, compared with previous elementary school foodservice programs are as follows. 1) This program can be used to foodservice and nutrition management at the same time. 2) The screen is designed as a homepage for convenience. 3) This program is useful in cycle menu planning. 4) Seasonal menu could be reflected in menu. 5) This program has the results printing function. 6) Data can be revisable. 7) This program can be used to middle and high school.