• 한국재료학회지
• /
• 제2권3호
• /
• pp.163-171
• /
• 1992

$TiO_2$가 5-50wt%첨가된 $SnO_2/TiO_2$ 후막형 감습소자를 스크린 프린팅 법을 이용하여 제조 하였다. 소자의 표면결정구조를 XRD, SEM 그리고 FTIR로 조사하였으며, 전기적 특성에 의한 후막소자의 감습특성을 측정하였다. $SnO_2/TiO_2$ 후막은 $TiO_2$ 결정상 보다 주로$(SnO^2){\cdot}6T$ 결정상으로 나타났으며, $1300^{\circ}C$에서 소결된 후막소자의 평균입경은 $2.0{\mu}m$이었다. 또한 $1300^{\circ}C$에서 소결된 10wt% $TiO_2$가 첨가된 $SnO_2/TiO_2$ 후막소자는 상대습도 20-90%에서 높은 감습특성을 나타내었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.35.1-35.7
• /
• 2019

Background: The purpose of this study was to measure the time of the conventional surgical planning (CSP) and virtual surgical planning (VSP) in orthognathic surgery and to compare them in terms of cost. Material and method: This is a retrospective study of the patients who underwent orthognathic surgery at the Pusan National University Dental Hospital from December 2017 to August 2018. All the patients were analyzed through both CSP and VSP, and all the surgical stents were fabricated through manual and three-dimensional (3D) printing. The predictor variables were the planning method (CSP vs. VSP) and the surgery type (group I: Le Fort I osteotomy + bilateral sagittal split osteotomy [LFI+BSSO] or group II: only bilateral sagittal split osteotomy [BSSO]), and the outcomes were the time and cost. The results were analyzed using the paired t test. Results: Thirty patients (12 females, 18 males) met the inclusion criteria, and 17 patients were excluded from the study due to missing or incomplete data. There were 20 group I patients (LFI+BSSO regardless of genioplasty) and 10 group II patients (BSSO regardless of genioplasty). The average time of CSP for group I was 385 ± 7.8 min, and that for group II was 195 ± 8.33 min. The time reduction rate of VSP compared with CSP was 62.8% in group I and 41.5% in group II. On the other hand, there was no statistically significant cost reduction. Conclusions: The time investment in VSP in this study was significantly smaller than that in CSP, and the difference was greater in group I than in group II.

• 마이크로전자및패키징학회지
• /
• 제19권4호
• /
• pp.79-83
• /
• 2012

신뢰성이 우수하며, 소형화가 가능하고, 우수한 열전도도의 은 전극을 이용할 수 있는 LTCC (Low temperature co-fired ceramic) 패키징은 환경 및 열에 약한 플라스틱 패키징을 대체할 것으로 기대받고 있다. 현재 LTCC 패키징의 원료 분말로는 주로 $Al_2O_3$을 사용하는데, 본 연구에서는 $Al_2O_3$보다 열전도도가 2배 우수한 ZnO을 일부 첨가 또는 대체한 조성 변화를 통하여 패키징의 열 특성 변화에 대해 연구하였다. 소량의 ZnO를 첨가하여 열전도도가 최대 25%까지 상승하는 결과가 나타났으며, 이 결과로 LED 수명이 증가할 것으로 예상된다. ANSYS 시뮬레이션 결과 열 유속의 값이 ZnO가 첨가된 경우 최대 56% 증가함을 확인할 수 있었다. 실제 LED 패키징을 제작하여 측정한 결과도 ZnO를 첨가한 LTCC 패키징은 $Al_2O_3$로만 이루어진 패키징보다 열저항이 최대 14.9% 감소하였다.

• 한국의상디자인학회지
• /
• 제17권3호
• /
• pp.13-27
• /
• 2015

The purpose of this study is to understand the general process from textile design till fashion design and to understand the relation between the body structure by using the x-ray technique. The research method was to see background of the anatomic feature and human skeletal X-ray projection through historical aspect of publications, the Internet, and paper. In terms of production, in order to present a design that takes into account the unique silhouette of the human body without distorting the shape of the human skeleton, X-ray images that were reconstituted using a computer graphic tool (Photoshop CS) were reproduced into the fabric as intense images through the digital Textile Printing technique that is capable of expressing fine and delicate details, and applied into the design. An original design was developed that emphasized the impression of the human body being projected and the shape of the human skeleton realistically expressed in terms of silhouette and detail. The results are as follows: First, Body has a anatomic formative characteristic and its formativeness becomes as a great motive for the artistic expression and thereby it becomes more unique and available for new design expression. Second, Using the 'body frame' as the motive of the research, there's mainly tried to make an unique expression. Third, according to reconstructing human skeletal X-ray projection by using Adobe Photoshop CS2, it can be expressed strong and unique design. Forth, DTP which is being used as an essential technique, expresses the body frame realistically and being used the special type of functional product and silk. Likewise by discovering the diverse formativeness of our body frame and reflecting the sense of humanity into the pieces there's been able to make and develop an unique fashion design. I sincerely hope there is a hug progress in this research in this area.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.913-918
• /
• 2005

It is expected that the inkjet technology offers prospect for reliable and low cost manufacturing of FPD (Flat Panel Display). This inkjet technology also offers a more simplified manufacturing process for various part of the FPD than conventional process. For example, recently the novel manufacturing processes of color filter (C/F) in LCD, or RGB patterning in OLED by inkjet printing method have been developed. This elaborates will be considered as the precious point of manufacturing process for the mass production of enlarged-display panel with a low price. On this point of view, we would like to review the status of inkjet technology in FPD, with some results on forming micro line by inkjet patterning of suspension type silver nano ink as below. We have studied the inkjet patterning of synthesized aqueous silver nano-sol on interface-controlled ITO glass substrate. Furthermore, we designed the conductive ink for direct inkjet patterning on bare ITO glass substrate. The first, the highly concentrated polymeric dispersant-assisted silver nano sol was prepared. The high concentration of batch-synthesized silver nano sol was possible to 40 wt%. At the same time the particle size of silver nanoparticles was below $10{\sim}20nm$. The second, the synthesized silver nano sol was inkjet - patterned on ITO glass substrate. The connectivity and width of fine line depended largely on the wettability of silver nano sol on ITO glass substrate, which was controlled by surfactant. The relationship was understood by wetting angle. The line of silver electrode as fine as $50{\sim}100\;{\mu}m$ was successfully formed on ITO glass substrate. The last, the direct inkjet-patternable silver nano sol on bare ITO glass substrate was designed also.

• 한국어류학회지
• /
• 제28권3호
• /
• pp.147-155
• /
• 2016

This study describes the cell type, ultrastructure and histochemical characteristics as a preliminary study for the research on integument of the smooth lumpsucker, Aptocyclus ventricosus in accordance with the physiological and environmental changes using light and electron microscopes. The SEM revealed the presence of well-developed finger printing structure in the skin surface. The skin surface of the smooth lumpsucker showed an irregular folds in cross section of light microscope. Integument is composed of outer epidermal and inner dermal layer. The epidermal layer is a stratified layer composed of epithelial cells, mucous cells, vacuolar cells, and granular cells. Epithelial cells are classified into superficial, intermediated, and basal cell. The superficial cells were the squamous with well-developed microridges on the free surface, and the microridges were covered with glycocalyx. The mucous cells of unicellular gland were mainly distributed in the apical layer of epidermis and contained mucosal materials of neutral glycoprotein. The vacuolar cells of unicellular gland were mainly distributed in the mid and basal layer of epidermis. The proportion of mucous cells and vacuolar cells were $7.0({\pm}1.07)%$ and $40.6({\pm}3.31)%$ of epidermal area, respectively. The granular cells contained membrane bounded secretory granules with high electron density and developed cell organelles in the cytoplasm. The dermal layer was loose connective tissue layer and composed of mainly collagen fibers. It also contained blood vessels and chromatophores of melanophores and reflecting platelets.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.122-128
• /
• 2016

The Biosensor biosensor pattern was developed by via an EHD (electro-hydro-dynamics (EHD) patterning process that was performed under atmospheric pressure at room temperature in a single step. The drop diameter was smaller than nozzle diameter and applied high viscosity conductive ink was applied in the EHD patterning method to provide a clear advantage over the piezo and thermal inkjet printing techniques. The Biosensor's biosensor's micro electrode pattern was printed by via a continuous EHD patterning method using 3three- type types of control parameters parameter (input voltage, patterning speed, nozzle pressure). High viscosity (1000 cps) conductive ink with 75 wt% of silver nanoparticles was used for experimentation. The incremental result of impedance of biosensor impedance was measured between the antibody ($10ug{\mu}g/ml$) to spore (0.1 ng/ml, 10 ng/ml, and $1ug{\mu}g./ml$) reaction at frequency 493 MHz frequency.

• 복식문화연구
• /
• 제26권5호
• /
• pp.764-776
• /
• 2018

The purpose of this study is to serve as a reference for creative fashion design by analyzing the types and aesthetic characteristics of trompe l'oeil in contemporary men's fashion. This research is an empirical study that utilizes both qualitative and quantitative methods to analyze fashion design cases and research articles such as academic papers and professional books. The study covers four major men's collections: Paris, Milan, New York, and London. The period being analyzed is from 2005 Spring/Summer, which is widely regarded as a turning point at which men's collections began rapidly, to 2019 Spring/Summer. The study analyzes 471 photos from domestic and international websites, with the following results. Types of trompe l'oeil in contemporary male fashion are classified into four types: (1) the deconstruction of clothing forms or creation methods, (2) optical illusions that create the effect of multiple layers of clothing on a single article of clothing and the reproduction of apparel details and clothing using 2D printing or embroideries, (3) realistic patterns on garments to create a camouflage effect, and (4) articles of clothing containing body images such as the chest, trunk, or internal human anatomy. These aesthetic characteristics in men's fashion design using types of trompe l'oeil are playful, deconstructive, and decorative features based on hyper-reality. This study aims to acknowledge trompe l'oeil as being widely used in contemporary men's fashion as a type of formative art, playing a crucial role in creative fashion design.

• 한국컴퓨터정보학회논문지
• /
• 제24권12호
• /
• pp.59-65
• /
• 2019

병원정보시스템은 의료계에서 병원의 전반적인 행정 업무 및 의사들의 의료 업무까지 다양한 정보를 포함하고 있다. 본 연구에서는 OpenCV를 이용해서 비전기반 얼굴인식 인증 및 등록 지원 병원정보시스템을 제안하였다. 구현한 보안 모듈 프로그램을 이용하여 병원정보시스템에서 접수 등록 시 병원관계자의 얼굴촬영을 통한 및 수납, 진료 및 처방 과정까지 보안성을 강화하고 개인정보의 2차적인 유출 없이 처리하고자 하였다. 구현한 보안 모듈 프로그램을 통하여 병원정보시스템에서 간호사가 확인할 수 있는 기존의 스티커 종이 태그와 손목 밴드 타입의 개인정보의 출력, 노출 및 인식이 필요 없게 하였다. 보안 모듈 프로그램에서 원본과 대조하여 영상을 아이디와 패스워드로 대신 입력되어하여 개인정보보호 및 인식율을 향상시키도록 하였다.

• 복식
• /
• 제53권6호
• /
• pp.11-23
• /
• 2003

Japonese woodblock printing has been accepted with a great curiosity at first, and it has been called as 'Japonisme' or 'Japonaiserie' in which the school of Impressionism accepted the Japanese type of art and developed it in Europe. The term of Japonisme is the concept that does not refer to one style but to the taste for Japanese painting, craft, fashion and the like in Europe proved as the historical phenomenon through Japanese works. That is, it means every Japanese disposition including all artistic techniques and contents relating to Japanese tastes in Europe. Fashion of dress as Japanese expressed in European painting works not only symbolizes the 'modernity' expressive of the aspiration and nostalgia for Japan but presents the Japan of exotic taste as the inquisitive object of sexual interest. And the expressive method of the peculiar the beauty of the body was described in Japanese painting works because of the fashion characteristics that the frontal side of Japanese clothing was presented in a more decorative and formative way than its reverse side due to decorative design and belts. It could be found that this was introduced actively into the painting works of the impressionist school. This study attempts to discuss the expressive style including the pictorial style, technique and theme shown in the accommodating process of Japanese painting in the Impressionistic school and investigate the phenomenon of Japonisme that was conducted in the western Europe. Accordingly, this study attempts to find out that clothing takes an important place as the aesthetic category of one historical point in time by investigating the Japanese clothing of the times shown in impressionist painting works and that clothing forms the stylistic characteristics and formative characteristics of painting. It could be found that dress existed not only as the instrument capable of illustrating the aesthetic attitude or will of the human being as visual identity but as plastic art and became the prime mover for reinterpreting and changing the plastic style of art frontier.