• 센서학회지
• /
• 제19권2호
• /
• pp.149-154
• /
• 2010

Top of the alumina body which is made according to plan has been printed using a screen printer equipment in order to print an electrode pattern. The electrode is connected with the quartz crystal oscillator of the piezoelectricity method which has a piezoelectric characteristic. The pressure contact department has been experimented using three type of the teflon. The teflon is good for pressure delivery vector but it is bad restitution. So we devised the structure which inserts the metal in the teflon. Bottom of the module is connected with the signal processing department which is planned in advance and then has investigated to characteristic. Therefore we have got the best output-voltage and frequency characteristic follows in the pressure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.963-966
• /
• 2000

Plasma display panel (PDP) is a type of flat panel display utilizing the light emission that is produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalk from adjacent sub-pixels. Mold for forming barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing process such as screen printing, sand-blasting and photosensitive glass methods. Mold for PDP barrier ribs have stripes of micro grooves transferring stripes of glass-material wall. In this paper. Stripes of grooves of which width 48 um, depth 124um, pitch 274um was acquired by machining the material of WC with dicing saw blade. Maximum roughness of the bottom and sidewall of the grooves was respectively 120 nm, 287 nm. Maximum tilt angle caused by difference between upper-most width and lower-most width was 2$^{\circ}$. Maximum Radius of curvature of bottom was 7.75 ${\mu}{\textrm}{m}$. This results meets the specification for barrier ribs of 50 inch XGA PDP. Forming the glass paste will be followed by using mold in the near future.

• 한국의류학회지
• /
• 제41권3호
• /
• pp.468-486
• /
• 2017

In this study, three kinds of wearable fashion prototypes were developed using 3D printers with the goal of developing a practical production method for daily clothes. Prototypes were modeled using Rhinoceros software and developed using FDM 3D printers and TPU filaments. The results of this study are as follows. First, it confirmed the possibility of FDM-type entry-level 3D printers as a tool to develop wearable fashion products. Second, TPU filaments that are soft and ductile are highly likely to be used as a clothing material. Third, patterns designed through the 3D modeling process can be sampled directly to a 3D printer and easily corrected and supplemented. Fourth, it was confirmed that TPU prints of about 1.00mm thickness can be sewn with fabric using sewing machines through the development of 'Prototype 1' and 'Prototype 2'; in addition, hand stitching is also possible. Fifth, as in the case of 'Prototype 3', it is possible to fabricate a garment fit enough to the body if the clothing configuration is designed to connect the basic module using TPU filaments. In the future, the development of wearable fashion prototypes using various materials and 3D printing technology will help diversify everyday clothes.

• 패션비즈니스
• /
• 제5권1호
• /
• pp.131-144
• /
• 2001

The purpose of this study is to examine the type of stitch and designs of knitwears using handcraft ornament techniques. This paper will also go on to develop and merchandize high value generated by design development. Knit is largely divided into weft knit stitch and warp knit stitch which are respectively woven by weft knitting machine and warp knitting machine. For clothing, circular knit and flat knit are frequently used while plain stitch, rib stitch and purl stitch are perceived as the basic stitches. Denbigh stitch, cord stitch, atlas stitch, which belong to tricot stitch, are the basic of warp knit stitch. There are also numerous fancy fabrics adapting the previously mentioned stitches and these are made into solid pattern and yarn dyed pattern. The handcraft ornament techniques in knitwears design are embroidery, beads, sequin, stone, printing, applique and fringe, etc. By applying these techniques thus creative expression, which cannot be expressed in other fashion items, is feasible. The women's knitwears are tries by mixed and various techniques, develope to high value knitwears, escaping from simple and practical items.

• 한국염색가공학회지
• /
• 제8권1호
• /
• pp.34-42
• /
• 1996

This Study was made to investigate alkaline dyeing systems for a new dyeing applicable polyester fibers. Disperse dyes for dyeing of polyester fibers were C.I. Red 60, Blue 56 and Yellow 54 as three primary colors of E type which used widely on the scene. Dyeing properties of dispers dyes on the polyester fibers are discussed according to variation of pH values for application of alkaline dyeing method compared with to ordinary acidic dyebath. Alkaline pH of the dyebath was controlled to pH 9 and 10.5 with buffer solutions using each hydrochloride and disodiumtetraborate, disodiumtetraborate and sodium hydroxide to promote the reproducibility of dyeing. Dyeing properties of dispers dyes on the polyester fibers by alkaline dyeing method compared with to ordinary acidic dyebath were discussed by estimation of color, wash-fastness, bleeding and migration of dyed polyester fabric.

• 대한지구과학교육학회지
• /
• 제5권3호
• /
• pp.276-286
• /
• 2012

This research is aimed to examine the differences through comparative analysis of the Earth Science contents in the science textbooks between Korea and DPRK. The contents of level and scope in science textbooks between Korea and DPRK are analysed by TIMSS frameworks. The results of this research are as follows : 1. The science textbooks of DPRK is lower in quality of paper, printing to that of Korea, and the illustrations, editing design in the textbooks of DPRK are fewer, monochromic and monotonous while those in Korea. 2. The contents of Earth Science in DPRK's science textbooks rank 37.0%, but those of Korea's science textbooks rank 25.5% of the whole textbooks. The learning units related to Earth Science are generally similar to the level and scope in science textbooks between Korea and DPRK. The type of inquire activities in the textbooks of DPRK largely takes on the model experiment, and it was shown that the number of experiments directly made by children is very small compared to Korea' textbooks. 3. There are lots of differences in Earth Science learning terms and predicates used in the textbooks between Korea and DPRK.

• 한국문헌정보학회지
• /
• 제31권1호
• /
• pp.215-229
• /
• 1997

15-16 세기는 인류 역사상 근세를 여는 획기적인 전환점의 시기로 인쇄술의 발명에 따른 도서 문화의 발전은 모든 분야의 도약에 결정적인 역할을 한 것이었다 이 논문에서는 이 시기의 도서를 논하되 물리적이고 형태적인 측면만을 부각시켜 기록매체로서의 종이와 양피지: 인쇄도구와 방법으로서의 주조활자와 조판, 그리고 압판기에 의한 인쇄, 접지와 그에 따른 도서의 크기: 지면 형태로서의 표제면과 간기면, 새롭게 등장한 각종 활자체와 서체, 지면의 배열과 삽도, 머리글자, 테두리 등의 장식, 그리고 마지막으로, 실용화된 가죽 장정 등에 대해 면밀히 검토하고 전체적으로 그 특성들을 종합했다.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.294-299
• /
• 2000

For practical application as a humidity sensor SnO$_2$thick films devices were fabricated on the refresh type electrode by screen printing method and their material and humidity sensing properties were investigated. As a function of Sb$_{2}$/O$_{3}$ addition rate grain size was increased while porosity and initial resistance were rapidly decreased. And the area of resistance variation according to relative humidity was decreased with increasing heat treatment temperature. SnO$_2$thick film device heat treated at 95$0^{\circ}C$ and contained 0.05mole% Sb$_{2}$/O$_{3}$ had a best humidity sensing properties. From this result it is conformed that humidity sensing properties of SnO$_2$thick film devices could be approved by very small amount of Sb$_{2}$/O$_{3}$ addition.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.391-398
• /
• 2004

Thick-film photolithography is a new technology that combines lithography processes, such as exposure and development, with the conventional thick-film process applied to screen-printing. In this study, we developed a low-temperature cofireable silver paste applicable for thick-film processing to form fine lines using photolitho-graphic technologies. The optimum paste composition for forming fine lines was investigated. The effect of processing parameters, such as the exposing dose, had on the fine-line resolution was also investigated. As the result, we found that the type of polymer and monomer, the silver powder loading, and the amount of photoinitiator were the main factors affecting the resolution of the fine lines. The developed photoimageable silver paste was printed on a low-temperature cofireable green sheet, dried, exposed, developed in an aqueous process, laminated, and then fired. Our results demonstrate that thick-film fine lines having widths < 20 $\mu\textrm{m}$ can be obtained after cofiring.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.59.1-59.1
• /
• 2012

Organic thin-film transistors (OTFTs) with printable semiconductors are promising candidate devices for flexible active-matrix (AM) display applications. Yet, stable operation of actual display panels driven by OTFTs has seldom been reported up to date. Here, we demonstrate a flexible reflective type polymer dispersed liquid crystal (PDLC) display, in which inkjet-printed OTFT arrays are used as driving elements with excellent areal uniformity in terms of device performance. As the active semiconductor, a novel, ambient processable conjugated copolymer was synthesized. The stability of the devices with respect to electrical bias stress was improved by applying a channel-passivation layer, which suppresses the environmental effects and hence reduces the density of trap states at the channel/dielectric interface. The combination of high performance and high stability OTFT devices enabled the successful realization of stable operating flexible color-displays by inkjet-printing.