• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.899-904
• /
• 2003

Microarrayer makes DNA chip and microarray that contain hundreds to thousands of immobilized DNA probes on surface of a microscope slide. This paper shows the development results for a printing type of microarrayer. It realizes a typical, low-cost and efficient microarrayer for generating low density microarray. The microarrayer is developed by using a robot of three-axes perpendicular type. It is composed of a computer-controlled three-axes robot and a pen tip assembly. The key component of the arrayer is the print-head containing the tips to immobilize cDNA, genomic DNA or similar biological material on glass surface. The robot is designed to automatically collect probes from two 96-well plates with up to 32 tips at the same time. To prove the performance of the developed microarrayer, the general water types of inks such as black, blue and red. The inks are distributed at proper positions of 96 well plates and the three color inks are immobilized on the slide glass under the operation procedure. As the result of the test, it can be shown that it has sufficient performance for the production of low integrated DNA chip consisted of 96 spots within 1 $cm^2$ area.

• Korean Journal of Materials Research
• /
• v.13 no.4
• /
• pp.271-278
• /
• 2003

Conventional backlight for liquid crystal display (LCD) uses mercury which leads to environmental pollution. In this study, characteristics of AC coplanar type mercury-free plasma flat lamp have been studied. Pollution-free Xe-He is adopted as a discharge gas system. Since the Xe gas has a lower efficiency in generating vacuum ultraviolet (VUV) than mercury, the improvement of luminance and luminous efficiency in the Xe gas system is very important. The electrode, dielectric, and phosphor layers constituting lamp are formed on the bottom glass by the screen printing method. The effects of pulse shape, on-time, and pulse frequency on the luminance and luminous efficiency have been examined. For Xe(5%)-He gas, the lamp exhibits higher efficiency with sharper pulse shape, higher peak voltage, and shorter pulse on-time (up to 2 $\mu\textrm{s}$). Higher efficiency and lower consumption of power were obtained at 30 kHz than at 60 kHz. The collision of ion to bottom electrodes is a dominant factor to raise the lamp temperature. Therefore the high voltage and low current discharge system is necessary for reduction of the lamp temperature as well as for enhancement of the luminous efficiency.

• Asian Journal of Atmospheric Environment
• /
• v.2 no.2
• /
• pp.75-80
• /
• 2008

A new-type apparatus decomposing volatile organic compounds (VOCs) using a combination system of an electrical exothermic SiC honeycomb and a catalytic filter was developed. This linear combination system is very useful to the catalytic decomposition of VOCs, because the gas involving VOCs is well heated in the SiC honeycomb and then flows into the catalytic filter. In the proposed apparatus, the outlet gas temperatures of SiC honeycomb maintained at ca. $300^{\circ}C$ after 5 min from the starting of applying electric current, and sufficient for the catalytic degradation of VOC components, i.e. toluene, isopropanol, methyl ethyl ketone and ethyl acetate. The average decomposition rate of total VOCs exhausted from a printing factory was 85% using pt catalyst at SV=19,000 in this system.

• Korean Journal of Oriental Medicine
• /
• v.8 no.1
• /
• pp.1-15
• /
• 2002

$\ulcorner$Uibujeolok$\lrcorner$ is a part of ${\ulcorner}$gogeumdoseojibseong[古今圖書集成]${\lrcorner}$ edited in 1726 Chinese Ching[淸] Dynasty. It refers ${\ulcorner}$Uibu[醫部]${\lrcorner}$ included in ${\ulcorner}$Bakmulhwipyeon Yesuljeon-Ha[博物彙編 藝術典下], and is composed of 520 volumes with 141 chapters. Though the name of Eubujeolok is used in most printed editions, the proper name was ${\ulcorner}$Uibujibseong[醫部集成]${\lrcorner}$ according to the original text of the copper type printing. Each category consists of 13 parts including Commentary, Diagnosis, and Organs and Bowels etc. And each chapter follows identical structure with categories. This composition type of ${\ulcorner}$Uibujibseong${\lrcorner}$ is similar with that of ${\ulcorner}$Dong-uibogam[東醫寶鑑]${\lrcorner}$ which was published 130 years ahead, but different from those of clinical books which published in China until then. Unusually there is no chapter dealing with Chinese herbs and acupuncture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.40-41
• /
• 2006

In this work, we developed the 0-3 type piezoelectric composite to incorporate the advantages of both ceramic and polymer. The PVDF-PZT composites were fabricated with various mixing ratio by 3-roll mi11 mixer. The composite solutions were coated on ITO bottom-electrode deposited on PET (polyethylene terephthalate) polymer film by the conventional screen-printing method. After depositing the top-electrode of silver-paste, 4kV/mm of DC field was applied at $120^{\circ}C$ for 30min to poling the 0-3 composite film. The value of $d_{33}$ was increased as the PZT weight percent was increases. But the $g_{33}$ value showed the maximum at 65 wt% of PZT powder.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.73-78
• /
• 2010

This research is about the drying and curing characteristic of conductivity metallic ink on-line curing device in order to improve the curing time for productivity in RFID Gravure printing. The curing process is carried out to increase the electric conductivity after the metallic ink is printed on the substrate. The metal ink is composed of nano-sized silver or copper particles. In this research, the combined IR and Hot air curing system is used and its results is compared with those of oven, IR and Hot Air type respectively. Generally the curing time in the past is about 3 minutes. But the combined system (IR+Hot Air) in this research shows that curing time is less than 30 seconds. These results is much faster than those of other system. This study can be help to make Roll-to-Roll drying and curing process for mass and continuous production on-line.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.790-798
• /
• 2021

With digital technology innovation, increased data access and mobile network use by consumers, products and services are changing toward pursuing differentiated values for personalization, and personalized markets are rapidly emerging in the fashion industry. This study aims to identify trends in digital customized automation technology by deriving types of digital customizing and analyzing cases by type, and to present directions for the development of digital customizing processes and the use of technology in the future. As a research method, a literature study for a theoretical background, a case study for classification and analysis of types was conducted. The results of the study are as follows. The types of digital customizing can be classified into three types: 'cooperative customization', 'selective composition and combination', 'transparent suggestion', and automation technologies shown in each type include 3D printing, 3D virtual clothing, robot mannequin, human automatic measurement program, AR-based fitting service, big data, and AI-based curation function. With the development of digital automation technology, the fashion industry environment is also changing from existing manufacturing-oriented to consumer-oriented, and the production process is rapidly changing with IT and artificial intelligence-based automation technology. The results of this study hope that digital customized automation technology will meet various needs of personalization and customization and present the future direction of digital fashion technology, where fashion brands will expand based on the spread of digital technology.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.4
• /
• pp.35-40
• /
• 2022

In this study, the average particle size of silver powder was 2㎛, 7㎛, and a mixture of these (50:50wt%), three kinds of silver pastes were prepared. In addition, as a result of examining the viscosity and viscoelasticity of the three silver pastes, TGA measurement, resistance change according to strain, and change in surface structure of the electrode, the following conclusions were obtained. Summarizing these results, it was found that it is most desirable to have a particle size of about 2㎛ in order to minimize the change in resistance due to strain.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.111-116
• /
• 1998

The simple solid electrolyte carbon dioxide sensor with heaters were fabricated by using Li ionic conductor. Two Au electrodes were used for the reference and sensing electrode respectively. Two types of gas sensors, type ( I ) and type (II), were fabricated. Type ( I ) sensor was fabricated by the method of melting and crystallizing alkali metal carbonate at the temperature of $420{\sim}500^{\circ}C$. The sensing membrane of type (II) sensor was formed by the printing method on sensing electrode after metal carbonate was mixed with binder. The response characteristics of sensors fabricated for the carbon dioxide were investigated for a range of $CO_{2}$ concentration from 950 ppm to 9,950 ppm at operating temperature $420^{\circ}C$. Type ( I ) sensor and type (II) sensor showed the sensitivity of 62 mV/decade and 65 mV/decade respectively. The emf/decade of type (II) sensor tested at $420^{\circ}C$ almost followed the theoretical value of Nernst's equation and showed stable response characteristics with the fast response time of $15{\sim}20$ sec. Also type (II) sensor showed excellent stability and reproduction properties for 60 days.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.955-960
• /
• 2019

The Computed tomography (CT) scan can have high radiation in a few tests, and this risk is significant given that it is often repeated in one patient. In children, the incidence of radiation-induced cancer is reported because organs are growing, are more sensitive to radiation. 3D printing has recently been studied to be applied to various applications as a research field for 3D printing applications, research on fabrication of radiation shields and materials has been conducted. The purpose of the 3D printer is to replace the existing panel-type shields and to make customized designs according to the shape of the human body. Therefore, research on 3D information processing to be input to the 3D printer is also necessary. In this study, 3D data of the human body surface, which is the preliminary step of the manufacture of patient-specific eye shield using stereo vision depth map technology, was studied. This study aims to increase the possibility of three-dimensional output. As a result of experimenting with this method, which is relatively simple compared with other methods of 3D information processing, the minimum coordinates for 3D information are extracted. The results of this study provided the advantages and limitations of stereo images using natural light and will be the basic data for the manufacture of eye shields in the future.