• Journal of Korean Association for Spatial Structures
• /
• v.15 no.3
• /
• pp.61-68
• /
• 2015

A study on BRP(Building Rapid Printing) technology is in an initial stage although general 3d printers are being developed in a great speed and with fruitful outputs. Even some laboratories in advanced countries have difficulties in their research due to many technological restrictions and have not produced a practical output yet. This paper proposed distinct directions in which the research of this aera should be developed and this manifested four areas - printing speed, reinforcing tech, material tech and nozzle tech and those areas were proposed with concrete development alternatives and objects.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1239-1242
• /
• 2006

Scintillation that is grainy patterns appeared on a screen has been one of a biggest issues in a rear projection TVs. In this paper, with focusing on the average size of random particle, it was proved that the particle size of calculated speckle and the one of measured scintillation are almost the equal. This result shows speckle phenomenon is an important factor of scintillation.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.1
• /
• pp.23-34
• /
• 2006

Color reproduction is one of the most important expression factors in digital printing. In this paper, an experiment was done where the characteristics of color reproduction in digital printing. The results could summarized as follows. The printing used device profile showed a color difference of less than printing used default value in digital printing. As a result of weighting color difference, a difference between color gamut of digital original and color gamut of printing, when transforming the RGB color space to CMY color space, a exclusion the gray revision. The solution is to optimize the color transformation by gamut mapping and gray revision.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.10 no.1
• /
• pp.81-90
• /
• 1992

The charater of standing box printing reguires a rich representation in a light and a shade of color and caues the modern photographs to be abundant of the ink and also shows the continuity of which any other printing is incapable because of its profound gradation. The clear printing in gravure can be said to be due to the good transfer of the ink - the completion of the transference of the ink into the stencil paper and the clear transference of the printing tone. The most inportant matter is the distance between the printing press and the doctor line. It is the matter of the structure and arrangement because of giving the most affect on the dryness of the ink in the cell. The glue of the ink in gravure changes by the kinds of the dye and the cellusolve used. To make the printing somoothly progressive from the high glue of the ink to the low glue of the ink will have to be used, which will be possible to choose the ester.ose the ester.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.104-110
• /
• 2016

The process of three-dimensional (3D) printing (also known as "rapid prototyping" and "additive manufacturing") uses computer-created digital models to produce 3D objects with a desired shape by stacking materials through a layer-by-layer process. The industrial potential and feasibility of 3D printing technology were recently highlighted in President Obama's State of the Union address in 2013. Since his speech, worldwide investment in and attention toward 3D printing technology have increased explosively. In addition, a number of 3D printing technology-based start-up companies have been established and evaluated as emerging enterprises making successful business models. In this paper, successful start-up companies (domestic and overseas) based on 3D printing technology will be reviewed.

• Proceedings of the Korean Printing Society Conference
• /
• 2000.04a
• /
• pp.45-55
• /
• 2000

Recently, as the prepress mainstream is changed to the digital wolkflow, various digital proofing systems such as high price dye sublimation printers and low price ink jet printers are widely used in printing industry. Generally, CRT monitors are also often used as a soft proofing device for hard-copy image output. However, displayed color image on CRT monitor does not match to the actual color printing sheets. Because, the color space of CRT monitor used RGB color space, and it is differ with printing device color space, CMY. Therefore, proper color compensations are needed to match the colors between hard-copy proofs on the printing device and soft copy proofs on the monitor. For the proper compensation, we used LUT and gamut mapping method for color space transformation between device dependent color space and device independent color space, vis a vis. This paper shows the application method and the usefulness of CRT monitor for the soft-copy proofing using the output characteristics of printing device.

• Current Photovoltaic Research
• /
• v.10 no.3
• /
• pp.90-94
• /
• 2022

The screen-printing method is the most mature solar cell fabrication technology, which has the advantage of being faster and simpler process than other printing technology. A front metallization printed through screen printing influences the efficiency and manufacturing cost of solar cell. Recent technology development of crystalline silicon solar cell is proceeding to reduce the manufacturing cost while improving the efficiency. Therefore, screen printing requires process development to reduce a line width of an electrode and decrease shading area. In this paper, we will discuss the development trend and prospects of screen-printing metallization using metal paste, which is currently used in manufacturing commercial crystalline silicon solar cells.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.590-605
• /
• 2021

The history of printing technology in Korea is studied by investigating existing ancient documents and records and comparing accumulated data and knowledge. Cultural property research requires non-destructive testing and observation with the naked eye or aided by a microscope. Researchers' experience and knowledge are required even though they cannot guarantee the outcome. For ancient documents and records that are presumed to consist of woodblock printing, wood type printing, metal type printing, or their combinations, each researcher draws various opinions and conclusions. This often causes confusion and divides the opinions of ordinary citizens and field specialists. Among them, the criteria for judging ancient documents or books printed using woodblock and metal movable material are ambiguous. Academic research on the development history of printing technology in ancient Korea has been stagnant, and conflicts among researchers have also erupted. Involvement of national investigative agencies not specialized in cultural properties has exacerbated the situation. In this study, we investigated printing characteristics that are likely to serve as more objective judgment criteria by quantitatively analyzing the experiments of retrieving several sheets of Korean paper (Hanji) using a replicated Hunminjeongeum (訓民正音) woodblock and quantitatively analyzing the images of the printed papers. In addition, the validity and questions for the typical phenomena presented as a method for distinguishing between woodblock and metal print are reviewed. We investigated the possibility of developing new objective judgement criteria through quantitative analysis using image analysis and investigating the printing characteristics of Korean paper through a reproduction experiment of woodblock printing.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.31-45
• /
• 1996

For the purpose of study on the printability of domestic art papers, the physical properties of domestic coated paper for offset printing were investigated. 25 kinds of sample papers were prepared and were examined in accordance with KS and TAPPI standard testing method i.e., basis weight, density, opacity, gloss, roughness, smoothness, brightness, and K&N absorption. IGT printability tester was used to obtain the printability parameters, such as maximum ink requirement of paper Y, limiting printing density D print through, and density smoothness constant m value.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.9 no.1
• /
• pp.45-51
• /
• 1991

Commercially available paper stickers, electrostatic stickers, and metal sticker generally involve process of printing on the substrate and die-cutting to peel the sticker off the release paper. Using plastisol ink and multi-layer screen printing technique, a process of non die-cutting sticker with same image on both sides was developed. It was also possible to prevent color mixing phenomena at image edge part by printing narrow lines of black ink along the borderline.