• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.2
• /
• pp.141-148
• /
• 2016

Recently computer-aided technology has been widely used in dentistry. DENTCA$^{TM}$ CAD/CAM denture system (DENTCA Inc.), one of CAD/CAM systems for fabricating complete denture, tries to collect and store all of a patient's information at the first visit. This system aims to deliver denture at the second visit through utilizing the CAD/CAM software to access the stored data for designing the 3D denture model. The 3 dimensional (3D) denture will then be fabricated with 3D printer. Many case reports have evaluated clinical application of CAD/CAM system for fabricating complete dentures. This case report is about fabricating of complete dentures using DENTCA system and conventional method in same patient. With two cases, usefulness and limitation of DENTCA system could be evaluated.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.47-53
• /
• 2010

In this study, analyses on the stencil printing using solder paste were carried out. The key design parameters in the stencil printing process are printing conditions, stencil design, and solder paste properties. Among these parameters, the effects of physical properties of solder paste such as viscosity, surface tension, and contact angle on the stencil printing process were investigated. The analyses were performed for simple geometry and boundary conditions. In the analysis, solder paste was pushed into a stencil hole by pressure instead of printer pad. Considering the geometry and computational efficiency, axisymmetric analyses were adopted. A commercial software (COMSOL), which is well known in the area of micro-fluids analysis, was used. From the results, it was shown that viscosity of solder paste had an effect on the filling speed, while surface tension and contact angle had an effect on the filling shape.

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.133-139
• /
• 2019

The Tech Shop, which provides an environment for fast prototyping by using 3D printers and various work tools, is a place where the fusion design education can be realized and creative ideas can be produced in the era of industrial 4.0. The purpose of this study is to propose and establish the possibility of a tech shop for the revitalization of local businesses in the Chungcheong province where many of contents related universities and institutions are located. For this purpose, we reviewed the necessity and the requirements of a tech shop, and analyzed the necessary components of a tech shop for successful operation. If the proposed tech shop is built and efficient operation is applied, it is expected that many of prototypes based on good ideas could be quickly produced and commercialized.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.2
• /
• pp.80-85
• /
• 2021

In the fourth industrial revolution, the demand for metal three-dimensional (3D) printing technology is rapidly increasing. Metal 3D printing is an efficient method for manufacturing products because the method reduces material waste compared to subtractive manufacturing. In addition, products with complex shapes, such as turbine blades, can be easily produced using metal 3D printing because the method offers a high degree of freedom. However, due to the long production time of metal 3D printing, mass production is impossible, and post-processing is necessary due to its low precision. Therefore, it is necessary to develop a new hybrid process that can efficiently process metals and to develop a metal 3D-printing-based hybrid processing system technology to secure high processing precision and manufacture complex shapes. In this study, the structural stability of a metal 3D printer based hybrid machining center was analyzed through structural analysis before its development. In addition, we proposed a design modification that can reduce the weight and increase the stiffness of the hybrid machining center by performing shape lightning based on the structural analysis results.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.3
• /
• pp.421-431
• /
• 2023

Recently, the destructive power of typhoons is continuously increasing due to the influence of global warming. In a situation where the installation of floating wind turbines is increasing around the world, concerns about the huge loss and collapse of floating offshore wind turbines due to strong typhoons are deepening. Regarding to the safe operation of the floating offshore wind turbine, the development of a new type of disconnectable mooring system is required. A new fairlead chain stopper considered in this study is devised to more easily attach or detach the floating offshore wind turbine with mooring lines comparing to other disconnectable mooring apparatuses. In order to investigate the structural safety of the initial design of fairlead chain stopper that can be applied to MW-class floating type offshore wind turbine, scale-down structural models were produced using a 3-D printer and structural tests were performed on the models. For the structural tests of the scale-down models, tensile specimens of acrylonitrile butadiene styrene material that was used in the 3-D printing were prepared, and the material properties were evaluated by performing the tensile tests. The finite element analysis of fairlead chain stopper was performed by applying the material properties obtained from the tensile tests and the same load and boundary conditions as in the scale-down model structural tests. Through the finite element analysis, the structural weak parts on the fairlead chain stopper were reviewed. The structural model tests were performed considering the main load conditions of fairlead chain stopper, and the test results were compared to the finite element analysis. Through the results of this study, it was possible to experimentally verify the structural safety of the initial design of fairlead chain stopper. It is also judged that the study results can be usefully used to improve the structural strength of fairlead chain stopper in a detailed design stage.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.3
• /
• pp.253-258
• /
• 2015

The 3D printing is any of various processes for making a three dimensional object of almost any shape from a 3D model. Recently, a rapidly expanding hobbyist and home-use market has become established with the inauguration of the open-source RepRap and Fab@Home projects. However, this causes problems regarding copyright protection and usage of illegal 3D data. In this paper, we developed a 3D printing open-market system, which guarantees copyright protection using the remote 3D printing without direct distribution of 3D design data. Because most of the home-use 3D printers are FFF (Fused Filament Fabrication) based on NC code system, open-market system uses FFF 3D printers. Also, open-market system inspects the uploaded 3D model data, so the system can prevent distribution of illegal model data such as weapons, etc.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.384-390
• /
• 2013

The sizes of cryogenic vessels and storage tanks are becoming bigger due to strong demands from semiconductor and LCD industry as well as high-tech electronic industry. Conventional level and pressure gauges used for cryogenic vessels were analog types which made exact measurement difficult for the remained quantity at lower levels due to their poor accuracy. In this study, a design for a digital type gas level gauge which can measure the pressure and level inside of the cryogenic liquefied gas storage tanks has been proposed by using a differential pressure sensor, in which the measured data are monitored by a host PC and are transferred to a mobile printer for data confirmation at local station.

• The Journal of Korean Medicine
• /
• v.38 no.1
• /
• pp.1-7
• /
• 2017

Objectives: This paper is focused on the development of supporting device for the direct moxibustion. This device makes one help to do moxibustion on one's head and back for oneself. Without this device, one can't avoidthe other's help to do moxibustion on one's head and back. Methods: The design protocols of the supporting device for the direct moxibustion are determined. And 3 dimensional simulation using Ultimaker's 3D printer was carried out. The parts of the supporting device for direct moxibustion are followings: 1. preparing of the main parts which are divided into an acupuncture touching sting and moxa holder. 2. preparing a grip part. Results: 3 different lengths of the acupuncture touching sting such as 3mm, 4mm, and 5mm were experimented for the perfect burning of moxa. Among them, the acupuncture touching sting with 4mm length was best for the perfect burning and for the organic functional tests. Conclusion: The supporting device for direct moxibustion will be helpful to minimize of the burning of skin, the pain, and the smoke.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.2
• /
• pp.167-173
• /
• 2002

The VMSS(Virtual Makeup Simulation System) is a virtual simulation system which can apply makeup, hair style, accessory to user's own face image through internee connection. The simulation result can be stored to server side DB and also can be printed out on client side printer. It is implemented using Java so, clients don't need any other client program to run the VMSS except Web browser and Java Plug-in installed on browser. IIS (Internet Information Server) Web server of Window 2000 and MS-SQL 7 are used to develop the overall system. Commercial JDBC Driver Type 4 is used to connect the applet and DB. It suggests a new direction of Web-based contents service development and can be applied to many other areas.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.1
• /
• pp.77-83
• /
• 2016

Intricate deflection requires many conventional actuators (motors, pistons etc.), which can be financially and spatially wasteful. Novel smart soft composite (SSC) actuators have been suggested, but fabrication complexity restricts their widespread use as general-purpose actuators. In this study, a hybrid manufacturing process comprising 3-D printing and casting was developed for automated fabrication of SSC actuators with $200{\mu}m$ precision, using a 3-D printer (3DISON, ROKIT), a simple polymer mixer, and a compressor controller. A method to improve precision is suggested, and the design compensates for deposition and backlash errors (maximum, $170{\mu}m$). A suitable flow rate and tool path are suggested for the polymer casting process. The equipment and process costs proposed here are lower than those of existing 3D printers for a multi-material deposition system and the technique has $200{\mu}m$ precision, which is suitable for fabrication of SSC actuators.