• 대한가정학회지
• /
• 제38권9호
• /
• pp.119-130
• /
• 2000

The purpose of this study was to confirm the possibility of screen printing with Natural dyes. The coloring matter such as sappan wood was used in order to obtain the colorant powder through the processes of extraction, low pressure concentration and the spray dry. After the screen printing on silk and cotton fabrics with colorant, K/S value changes of color and color fastness were measured. The main resets were as follows : 1. The viscosity of printing thickeners of sappan wood powder was about 15,200 cps, and the highest K/S value of the fabrics printed with sappan wood was obtained at 90$\pm$2$\^{C}$ of steaming temperature and 80 minutes of steaming time. 2. For the fabrics printed with sampan wood, adding of urea was not effective, since the more the concentration of urea increased, the more K/S values decreased. 3. For the natural dyes printing, the more the concentration of colorants increased, the more K/S values increased. In general, the K/S values of the printed fabrics were higher when treated with mordants rather than without mordants. Specifically, the λmax sappan wood was 520∼570 nm, and the K/S value was highest when treated with Cu mordant and lowest when treated with Sn. 4. Generally, the color fastness was relatively fair.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1997년도 한국감성과학회 연차학술대회논문집
• /
• pp.146-151
• /
• 1997

Recntly many devics print electronic images in a variety of ways. But the reproduced color, gamut mappung method and expanded nonlinear quantization are proposed. The color gamut mapping uses saturation mapping of HSI color space. Dithering operation for printing uses expanded nonlinear quantization which considers overlapping phenomena of neighboring printing dots. So the printed image is similar to the image of monitor and can produce high quality image in the low bit color devices.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.328-331
• /
• 2001

Color simulation on a portable colorimeter was performed to distinguish quantitatively a chromaticity coordinates on a color guide of a urine strips by using the spectral power distribution of chip LED, the spectral reflectance of printed objects, and the spectral sensitivity of photodiode. The CIE tristimulus values and chromaticity coordinates realized by a colorimeter were modified to be conformable with real color reactions. Experimental results showed a real color in comparison with those obtained by Colorimeter CM2C(Color Savvy).

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.146-158
• /
• 2021

This paper reports the preparation of an ink-jet printed flexible electrochromic device based on a water-soluble viologen-functionalized dendrimer. Polyamidoamine (PAMAM) dendrimers were modified with different concentrations of 1-1 bis(propylamine)-4,4'-bipyridylium dibromides to obtain solution-processable electrochromic materials (K1/2 and K1). FTIR, NMR, and elemental analyses are used to characterize synthesized viologens. Moreover, their electrochemical properties were investigated using cyclic voltammetry in an electrolyte solution consisting of 0.1 M HCl to find the optimum viologens. The low-cost ink-jet printer was used to print the prepared water-soluble electrochromic inks onto the ITO coated PET substrate to form desired transparent patterns. The electrolyte was applied on the printed electrochromic ink to make a sandwich with another ITO coated PET to prepare the electrochromic devices (ECD). By applying an electrical potential (0 to -2 V), the transparent ECD's color changed from colorless to blue. The color changes for the optimum ECD (K1), which had more viologen units on the dendrimer, was accompanied by an optical contrast of 47% and 311.5 ㎠C-1 coloration efficiency at 600 nm.

• 패션비즈니스
• /
• 제13권6호
• /
• pp.89-98
• /
• 2009

Computer development and new printing technology allow us to express a new type of digital textile designs those were not possible in the past. In this study, watercolor overlaying effect of various colors was tried using airbrush tool in Photoshop program. Photoshop program is a powerful graphic tool and can be used in textile design area to generate various types of designs. Woven texture was also applied to the design to give yarn dyed effects or rich appearance. Photoshop program was also used to develop woven texture without the help of the professional textile CAD. Photoshop channels enables the designers to apply various textures to the image. Plain weave and houndstooth were applied in this study. Colorways of the developed designs having watercolor effect and woven texture by applying Photoshop color adjustment function. Quick and simultaneous changes of colors were possible using this method. The developed textile designs were printed by transfer DTP. Successful textile design prints were expressed and showed watercolor overlaying effect and woven texture. The printed textiles show a little brighter color, and therefore, sample printing is recommendable in case of color sensitive production.

• 한국컴퓨터정보학회논문지
• /
• 제3권3호
• /
• pp.1-5
• /
• 1998

본 논문에서는 일반 도로 안내 지도로부터 도로 영역들을 자동으로 추출하는 방법에 대해 제안하였다. 기본 추출 방법은〔1〕에서 제안한 선추적 방법을 이용하되 자동으로시작점을 선택할 수 있도록 함으로써 빈번한 사용자의 개입 없이 전체 도로 영역을 추출할수 있도록 하였다. 이 때 도로 종류(고속국도, 일반국도. 지방도 등)별로 색상을 분류하고 각색상에 대한 군집도를 분석하여 정리하여 클러스터를 생성함으로써 자동으로 시작점 선택이가능하도록 하였다. 본 연구에서 제안한 방법은 다양한 칼라지도에 적용하여 실험함으로써그 타당성을 검증하였다.

• 한국의류학회지
• /
• 제46권6호
• /
• pp.945-962
• /
• 2022

This study examines the use of traditional patterns by new Hanbok brands. A Saekdong print pattern based on previous research was developed and applied to clothing designs. A total of 488 images of printed products from the seven new Hanbok brands and 219 images from the collections of the National Folk Museum of Korea were analyzed. Traditional patterns accounted for 47.4% of the total printed products of the new Hanbok designs, with the following ratio of use, in descending order: flower patterns, traditional paintings, animals, geometrical designs, Dancheong, text and others, Jogakbo, and Saekdong. Saekdong was found in three brand products, and the color or shape was modified. To develop the Saekdong image, five colors - red, yellow, blue, white, and green - were selected. The ratio of use for each color and the width of each color were determined with reference to previous studies. The average color value was determined through color analysis of the Saekdong collections. A total of seven items were designed for the print pattern, and four items were added for coordination to consist of four styles. This study aims to use the results of this analysis to provide insights into product development using traditional patterns.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.69-85
• /
• 2010

Currently, environmental contaminants that can cause Aromatic types of hydrocarbons, less than 1% made of Aromatic Free kind of used products, soybean oil products with linseed oil with the products, rice products using a wide range of environmentally ecological ink since 2000 is released quickly. All materials used in printed material, if the green is the best way to print the composite materials in industrial applications, because each process on the print quality and productivity, there can be many differences in this experiment because it accounts for a large proportion in the print general ink in the ink section and the International color standards(ISO2846-1:2006) certified ecological ink were compared. Therefore, in this paper has the ink released from the same company, each common general ink and ecological ink in the same condition which results were focused on whether the emerging international color standard(ISO 2846-1:2006) recognized for environmentally ecological ink printed color reproduction of the actual offset(color reproduction) how conformity to ISO 12647-2 standard color on the basis of the offset would check Color Reproduction. Based on the results of the experiments of this study, given the ecological ink coated paper, uncoated paper both color difference and the gamut of the ISO 12647-2 standard is suitable for ecological ink, the ink's color gamut reproduction, even more than existing international standards, there is no confirmed that the correct color reproduction possible. Using environmentally ecological ink industries is expected to respond to environmental policy.

• The Journal of Advanced Prosthodontics
• /
• 제13권3호
• /
• pp.160-171
• /
• 2021

Purpose. This in-vitro study evaluated and compared the color stability of 3D-printed and conventional heat-polymerized acrylic resins following aging, mechanical brushing, and immersion in staining medium. Materials and methods. Forty disc-shaped specimens (10 mm in diameter and 3 mm thick) were prepared from two 3D-printed [DentaBASE (DB) and Denture 3D+ (D3D)] and one conventional polymethylmethacrylate (PMMA) denture materials. The specimens were thermo-cycled, subjected to mechanical brushing, and were immersed in either coffee, lemon juice, coke, or artificial saliva (AS) to simulate one and two years of oral use. Color measurements of the specimens were recorded by a spectrophotometer at baseline (T0), and after one (T1) and two years (T2) of simulation. The color changes (ΔE) were determined and also quantified according to the National Bureau of Standards (NBS) units. Descriptive statistics, followed by factorial ANOVA and Bonferroni post-hoc test (α=.05), were applied for data analysis. Results. The independent factors, namely material, staining medium, and immersion time, and interaction among these factors significantly influenced ΔE (P<.009). Irrespective of the materials, treatments, and time, the highest and the lowest mean ΔEs were observed for PMMA in lemon juice (4.58 ± 1.30) and DB in AS (0.41 ± 0.18), respectively. Regarding the material type, PMMA demonstrated the highest mean ΔE (2.31 ± 1.37), followed by D3D (1.67 ± 0.66), and DB (0.85 ± 0.52), and the difference in ΔE between the materials were statistically significant (P<.001). All the specimens demonstrated a decreased color changes at T2 compared to T1, and this difference in mean ΔE was statistically significant (P<.001). Conclusion. The color changes of 3D-printed denture resins were low compared to conventional heat polymerized PMMA. All the tested materials, irrespective of the staining medium used, demonstrated a significant decrease in ΔE values over time.

• 한국의상디자인학회지
• /
• 제8권3호
• /
• pp.129-143
• /
• 2006

This study is to review the printed cotton textile industry of Europe in 17th-l8th century, and specially investigate the development of the Toile do Jouy, printed French fabrics around the 18th century. Generally, the Toile de Jouy has two different meanings. The first meaning is the popular printed cotton textiles producted by wood block printing, copper plate printing and roller printing techniques at Jouy on Joas factory in France, around 18th century. The second meaning is the monochromatic upholstery fabrics printed by copper plate. Actually, this monochromatic printed textiles were the most popular printed cotton fabrics with large scale scenic designs with people, trees, birds, buildings, mythical heroes, protagonists of novel and country scenes of shepherds, sheep and other animals manufactured by Jouy on Joas factory. Main issue of this paper is to propose features of pattern, color and classify types of patterns expressed on the Toile de Jouy fabrics according to printing techniques such as wood block printing, copper plate printing and copper roller printing. And this study is also to analyze on origins of the variety of names called the printed cotton textiles in those days. The results of this study can help to understand the knowledge of printed cotton textiles in Europe and be effectively applied to develop printed fabric design in the textile industry.