• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.73-81
• /
• 1999

This paper was intended to evaluate the effect of the blending condition of pigments on the packing structure of coating color and the interaction between pigments and latices on the optical and interior properties of coated paper. It has been studied many ways to modify the coating structure to induce the interaction among coating components as followings ; 1) to use dispersant for pigment, 2) to control the charge density and the type of surface charge of latex, 3) to support the water retention by adding water retention agent or flow modifier. This paper was performed through the introduction of interaction between pigments which were two kinds of clays and one precipitated calcium carbonate(PCC) and ionic latices of which anionic and amphoteric respectively under the certain blending condition of pigments where their blending ratio of clays to calcium carbonate was 70pph to 30pph. The reason is that packing volume of pigments was highest in that region and thixotropical behavior appears in measuring rheology of coating color. We measured the properties of coating color, interaction with pigments and latex, and properties of coated paper and its printability. As a results, we could find out that amphoteric latex had a great influence on the interaction with pigments, especially clays, no matter what grade and also affected the coating structure significantly in case that this blending condition was 70(clays) to 30(PCC). It produced a powerful effect on the forming of bulky and smooth coating structure and in turn improved the printability of coated paper.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.91-97
• /
• 2022

The wettability and rheological properties of solder paste with the size of the solder powder were evaluated. To formulate the solder paste, three types of solder powder were used: T4 (20~28 ㎛), T5 (15~25 ㎛), and T6 (5~15 ㎛). The viscosities of the T4, T5, and T6 solder pastes at 10 RPM were 155, 263, and 418 Pa·s, respectively. After 7 days, the viscosity of the T4 solder paste slightly increased by 2.6% and that of T5 was increased by 20.6%. The viscosity of the T6 solder paste after 7 days could not be measured due to high viscosity. The viscosity variation with solder particle size also affected on the printability of the solder. In the case of the T4 solder paste, printability, slump, bridging, and soldering properties were excellent. On the other hand, T5 showed slight dewetting and solder ball defects. Especially, T6, which the smallest powder size, showed poor printability and dewetting at the edge of solder.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.04a
• /
• pp.404-409
• /
• 2007

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.1
• /
• pp.113-113
• /
• 2015

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2005.11a
• /
• pp.197-203
• /
• 2005

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.153-159
• /
• 2006

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2005.04a
• /
• pp.147-161
• /
• 2005

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.41-46
• /
• 2006

Printed mottle of coated paper is one of the most common but the most difficult problem in offset printing. Printed mottle is caused by an uneven penetration of Ink into the paper, binder migration, etc. For a high quality printing, development of new paper coating technologies to prevent print mottle is required. So for, the study of solving printed mottle is coated paper absorption controlled by base paper sizing and coating layer binder migration control. As a results, printed mottle has improved in coated paper. But printing is worked by interaction of printing ink, coated paper and printing pressure, then we need to understand of interaction printing work and coated paper. This research focused on a way of improving printed mottle by investigating various printing conditions such as ink dispersion, nip condition and amount of ink transfer using IGT printability tester.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.53-64
• /
• 2007

Gravure printing is the most useful printing process than any other engraving printing method. According to the cell which is variable size and depth, ink is transferred substrates. So, the amount of ink from cells has a great effect on the qualities of final printed products. The variables effect on the printability of final products are proportion of the width and length, the rhelogical properties, roll speed etc. However the mechanism of gravure is difficult to study scientifically because of high speed and excessively small size of the cell. To approach the mechanism we experimented the real test by using gravure printability. The condition of variables of IGT is pressure and velocity. By using Polyflow 3. 10. 0 simulation software, we built up the theoretical model under the constant variables. Then, we compared the real test with the simulation results. Therefore, it is studied the mechanism of gravure scientifically and it can be analysed the effect of the variable conditions.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.77-77
• /
• 2010

본 연구에서는 Sn-3.0Ag-0.5Cu (SAC305) 무연솔더의 최적 인쇄성을 위한 PCB 및 마스크설계, 스크린프린팅 공정변수의 최적값을 실험계획법을 통해 평가하였다. 사용된 칩은 가로 0.4mm 세로 0.2mm의 0402 MLCC칩이며, 사용된 시험보드는 OSP 표면처리된 PCB이었다. 인쇄성을 판단하기 위한 공정인자는 금속마스크 두께, 마스크홀 크기, 패드크기 및 모양, 인쇄각도, 인쇄속도, 판분리속도이었다. ANOVA분석을 통해 주인자를 파악하였으며, 인쇄성에 영향을 미치는 주인자는 마스크두께와 인쇄각도임이 확인되었다. 그 후 중심 합성법을 이용하여 인쇄성 최적 조건을 확인하였다. 결과로 나타난 등고선/표면도를 통해, 마스크두께가 작을 때에는 인쇄각도가 작아야 높은 인쇄성을 갖으며, 또한 마스크 두께가 클 경우에는 인쇄각도가 커야 높은 인쇄성을 가짐을 알 수 있었다. 추가실험을 통해서 인쇄성 표면도의 정확도를 확인하였으며, 실험값은 표면도에서 표시된 인쇄성값과 비슷함을 알 수 있었다. 또한, 인쇄성이 낮은 영역과 높은 영역에서 접합강도값을 측정하였으며, 인쇄성이 좋은 영역에서 접합강도도 높음을 알 수 있었다.