Journal of the Korean Graphic Arts Communication Society (한국인쇄학회지)

The Korean Graphic Arts Communication Society (한국인쇄학회)
권호 표지

A Study on the Computer Simulation in the Changing Velocity and Pressure in Gravure Printing.

그라비어 인쇄에서 속도와 압력변화에 따른 시뮬레이션에 관한 연구

  • Park, Sung-Jun (Dept. of Graphic Arts Engineering, Graduate School, Pukyong National University) ;
  • Lim, Soo-Man (Dept. of Graphic Arts Engineering, Graduate School, Pukyong National University) ;
  • Youn, Jong-Tae (Division of Image & Information, College of Engineering, Pukyong National University)
  • 박성준 (부경대학교 대학원 인쇄공학과) ;
  • 임수만 (부경대학교 대학원 인쇄공학과) ;
  • 윤종태 (부경대학교 공과대학 화상정보공학부)
  • Published : 2007.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Gravure printing is the most useful printing process than any other engraving printing method. According to the cell which is variable size and depth, ink is transferred substrates. So, the amount of ink from cells has a great effect on the qualities of final printed products. The variables effect on the printability of final products are proportion of the width and length, the rhelogical properties, roll speed etc. However the mechanism of gravure is difficult to study scientifically because of high speed and excessively small size of the cell. To approach the mechanism we experimented the real test by using gravure printability. The condition of variables of IGT is pressure and velocity. By using Polyflow 3. 10. 0 simulation software, we built up the theoretical model under the constant variables. Then, we compared the real test with the simulation results. Therefore, it is studied the mechanism of gravure scientifically and it can be analysed the effect of the variable conditions.

Keywords