• 문화기술의 융합
• /
• 제9권5호
• /
• pp.529-534
• /
• 2023

고속 및 대면적 인쇄를 위한 라인 프린팅 기술은 늘어난 헤드 길이만큼 헤드 내부로 잉크를 공급하는 유로를 확보해야 하는 구조적 취약점과 제조 과정에서 발생하는 잔류응력에 의한 피드홀 변형으로 인해 노즐층이 파손되거나 잉크가 누출되는 결함이 있다. 따라서 본 논문에서는 견고하고 신뢰할 수 있으며 라인 프린팅 방식에 보다 적합한 열전사 방식의 잉크젯 프린트 헤드 형상을 제안하고자 한다. 먼저 실험을 통해 초기 라인 프린팅 헤드의 변형량을 측정한 후 이를 등가의 하중량으로 변환하였으며 FEA 해석을 통해 하중 추정 방법의 타당성을 검증하였다. 또한 헤드 크기를 증가시키지 않으면서 변형을 최소화할 수 있도록 기둥이나 지지벽으로 단위 노즐을 보강하거나 지지빔이나 건/습식각된 브릿지를 추가하여 내부 강성을 증가시킨 헤드 구조를 설계하였으며, 피드홀 변형이 최대 90% 감소하는 것을 확인하였다. 제안된 형상 중 공정 편의성과 제작비용을 고려하여 건식각된 피드홀 브릿지 형태의 헤드를 선정하였으며 실제 제작을 통해 노즐층 변형이나 잉크 누출 없이 정상 작동하는 것을 확인하였다.

• 정보기술과데이타베이스저널
• /
• 제3권2호
• /
• pp.53-73
• /
• 1996

Thesedays more collaboration is required of scholars than before, because some complex problems are beyond the individuals' research capability. Traditional print-based journal systems have been playing a role of supporting scientific collaboration, in that they provide the state-of-the-art knowledge. Those journal systems, however, are known to have some problems. To cope with some of those problems of the print-based journal systems, electronic journal systems have been suggested and implemented. Investigation shows us that electronic journal systems still have some problems. This paper proposes a new form of electronic journal system, structured electronic journal system, which is believed to better support the scientific collaboration. It is designed so that it is easier to figure out the synopsis of an article and so that authors and referees of a submitted paper can participate in the discussion for verifying the significance of the paper. Object-oriented design of a structured electronic journal system which is to be built on top of a object-oriented database system is explained with example structures.

• 보존과학회지
• /
• 제36권1호
• /
• pp.28-36
• /
• 2020

The storage environment of a Japanese woodblock print collection was assessed for organic acids. The active air sampling method was used to collect organic acid emissions in the low microgram range from areas of a selected woodblock print with different pigments, following which an off-gassing mitigation strategy based on the fan filter unit(FFU) system was investigated. Research findings revealed that the off-gassing behavior of woodblock prints is significantly impacted by storage practices and to a lesser degree by the pigments. The FFU system can be used as a mitigation strategy, but the permanence of the results depends on the storage conditions.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권4호
• /
• pp.25-30
• /
• 2018

When producing a business card, there is always a risk for exposing personal information as the information from the business card application is saved in the computer of the printing agency. The information that goes into the business card application file, such as name, mobile phone number, and e-mail address is not encrypted, which makes it easy to access. This study was conducted in order to find a way to automatize the business card application process by encrypting the information entered into the business card application file, simplifying the business card application process, minimizing the workload and by directly linking to the print shop to remove the print file after completing the printing of the business card.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.798-807
• /
• 2004

A testing system was developed to improve the reliability of printhead and several printheads were tested. We developed a thermally driven monolithic inkjet printhead comprising dome-shaped ink chambers, thin film nozzle guides, and omega-shaped heaters integrated on the top surface of each chamber. To perform a fatigue test of an inkjet printhead, the testing system automatically detects a heating failure using a Wheatstone bridge circuit. Various models were designed and tested to develop a more reliable printhead. Two design parameters of the width of reinforcing layer and heater were investigated in the test. Specially., the reinforcing layer was introduced to improve the fatigue life of printhead. The life-span of heater with a reinforcing layer was longer than that without a reinforcing layer. The wider the heater was, the longer the life of printhead was.

• 한국의류산업학회지
• /
• 제3권4호
• /
• pp.373-377
• /
• 2001

When the polyester/cellulosic fiber mixed fabrics were treated with sodium hydrogensulfate for burn-out printing, it is examined how the effects of process conditions as concentration of acid, fixation temperature and fixation time act onto the properties of the polyester ground fabrics. The print paste, indalca solution, was mixed with sodium hydrogensulfate and glycerine, and then screen-printed on the fabrics. The properties of the polyester ground fabrics after removing away the cellulosic fibers were investigated. The yellowness index and the breaking load of polyester ground fabrics affected by the process conditions, especially dry heat fixation temperature.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.689-693
• /
• 2005

Inkjet printing is a non-contact and direct writing associated with a computer. In the industrial field, there have been many efforts to utilize the inkjet printing as a new way of manufacturing, especially for electronic devices. For the application of inkjet printing to electronic field, one of the key factors is exact realization of designed images into printed patterns. In this work, micro patterning for conducting line has been studied using the piezoelectric print head and silver nano ink. Dimensions of printed images have been predicted in terms of print resolution and diameter of a single dot. The predicted and the measured values showed consistent results. Using the results, the design capability for industrial inkjet printing could be achieved.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.596-608
• /
• 1996

For design of early childhood children's footwear, this study was to analyze the properties of their foot. This study was performed in 200 male and 200 female early childhood children from 3 and 6 years old lived in susan urban area. There were measured 17 items of the foot and calculated 4 indexs for analysis. The result was as follows; 1 The growth rate differs from the sites of a foot. According to the growth of age, early childhood children's foot are more slender. 2. The average of foot print angle is $15~27^{\circ}$ and it is flat. Among the age groups, the numbers of 4 kinds of foot print angle are different siginificantly. 3. The average of metatarso phalanx angle is $174~178^{\circ}$ that is higher than adults'. 4. There are no significant difference between male children's foot and female childen's one except tarsal circumference and tarsal height. Tarsal part of male children is higher and ticket than female children's. 5. Because some of 3~6 age groups belong to the one foot length group, we should consider the age properties of foot in order to design footwears. When the size of footwear is divided by only foot length, the ranges of another measurements are larger than the range of foot length.

• 한국인터넷방송통신학회논문지
• /
• 제15권5호
• /
• pp.177-182
• /
• 2015

3D 프린터의 빠른 보급에도 불구하고 3D 프린팅 속도 느리기 때문에 3D 프린터를 여러 사람이 동시에 이용하기에는 어렵다. 기존 3D 프린팅 솔루션은 SD 카드에 파일을 옮겨서 출력하거나 PC에서 출력하는 방법이 있으나 시간이 많이 소요되고 프린팅 진행정도를 알 수 없다. 아직 원격에서 3D 프린터를 제어하고 프린팅이 가능한 솔루션은 없다. 따라서 본 3D 소프트웨어 솔루션은 인터넷 네트워크 상에 3D 프린터를 연결하고 이들 프린터를 이용하기 위해서는 스마트폰 앱에서 사용할 프린터를 선택하며 원격 제어 및 프린팅이 가능하도록 한다. 본 논문에서는 이러한 기능들이 수행 가능한 안드로이드 앱을 제작하기 위하여 UML을 이용한 효과적인 분석/설계 및 구현 방법을 제시하고자 한다.

• 유통과학연구
• /
• 제13권7호
• /
• pp.5-10
• /
• 2015

Purpose - Gen Y college students have emerged as a profitable consumer segment because of their growing purchasing power and influence on others' buying decisions. Digital marketing is deemed effective in increasing Gen Y college students' knowledge of and interest in products and services. This research examined the effect of digital marketing on Gen Y college students'perceptions, attitudes and purchase intentions toward cotton clothing compared to that of conventional print marketing and no marketing. Research design, Date and Methodology -Data were collected from three different groups of college students from a large university in the U.S.: the group with no cotton marketing, those with print media marketing, and those with digital marketing. Result - The findings confirmed that college students who were exposed to cotton digital marketing displayed the highest level of agreement on the benefits of cotton clothing. They also exhibited the most favorable attitudes and strongest purchase intentions toward cotton clothing. Conclusions - To target Gen Y consumers effectively, marketers should consider a digital marketing strategy to promote their products and services.