• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.101-102
• /
• 2008

얼굴인식 분야에서 PCA(Principal Component Analysis) 기반 알고리즘은 비교적 간단한 구조와 높은 인식률로 인해 많이 사용되고 있지만 조명이나 얼굴 포즈 변화에 민감하다는 단점이 있다[1]. 이런 단점을 해결하기 위한 노력으로 PCA를 다른 얼굴인식 알고리즘과 결합함으로서 조명과 포즈 변화에 강인한 얼굴인식을 위만 연구가 현재 활발히 진행되고 있다. 본 논문은 PCA기반 얼굴인식에서 조명이 다양하게 변할 때 이에 따른 인식률의 변화와, 인식이 실패했을 경우에 인식 대상이 유사도 상위후보군에 들어가는지를 조사함으로서 PCA기반 알고리즘의 신뢰도를 확인하고자 한다. 이를 위해 Yale Face Database H와 Extended Yale Face Database B를 이용하여 실험한 결과 약 93%의 인식 성공률을 확인했으며, 7%의 인식 실패한 영상의 경우 그 인식하고자 했던 얼굴이 유사도를 기준으로 정렬된 학습 영상에서 상위 후보군에 속한다는 실험 결과를 얻음으로서 PCA기반 얼굴 인식 알고리즘의 신뢰성을 확인할 수 있었다.

• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.302-311
• /
• 2017

Nowadays, with the burgeoning development of economy, $CO_2$ emissions increase rapidly in China. It has become a common concern to seek effective methods to forecast $CO_2$ emissions and put forward the targeted reduction measures. This paper proposes a novel hybrid model combined principal component analysis (PCA) with regularized extreme learning machine (RELM) to make $CO_2$ emissions prediction based on the data from 1978 to 2014 in China. First eleven variables are selected on the basis of Pearson coefficient test. Partial autocorrelation function (PACF) is utilized to determine the lag phases of historical $CO_2$ emissions so as to improve the rationality of input selection. Then PCA is employed to reduce the dimensionality of the influential factors. Finally RELM is applied to forecast $CO_2$ emissions. According to the modeling results, the proposed model outperforms a single RELM model, extreme learning machine (ELM), back propagation neural network (BPNN), GM(1,1) and Logistic model in terms of errors. Moreover, it can be clearly seen that ELM-based approaches save more computing time than BPNN. Therefore the developed model is a promising technique in terms of forecasting accuracy and computing efficiency for $CO_2$ emission prediction.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.6
• /
• pp.47-53
• /
• 2004

This paper proposes an algerian for determining robot location using appearance-based paradigm. First, this algorithm compresses the image set using Principal Component Analysis(PCA) to obtain a low-dimensional subspace, called the eigenspace, and it makes a manifold that represent a continuous-appearance function. Neural network is employed to estimate the location of the mobile robot from the coefficients of the eigenspace. Then, Kalman filtering scheme is used for the fine estimation of the robot location. The algorithm has been implemented and tested on a mobile robot system. It is shown that the robot location is estimated accurately in several trials.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.2
• /
• pp.111-119
• /
• 2013

Face recognition has recently become one of the most popular research areas in the fields of computer vision, machine learning, and pattern recognition because it spans numerous applications, such as access control, surveillance, security, credit-card verification, and criminal identification. In this paper, we propose a simple descriptor called an ECSP(Extended Center-Symmetric Pattern) for illumination-robust face recognition. The ECSP operator encodes the texture information of a local face region by emphasizing diagonal components of a previous CS-LBP(Center-Symmetric Local Binary Pattern). Here, the diagonal components are emphasized because facial textures along the diagonal direction contain much more information than those of other directions. The facial texture information of the ECSP operator is then used as the input image of an image covariance-based feature extraction algorithm such as 2D-PCA(Two-Dimensional Principal Component Analysis). Performance evaluation of the proposed approach was carried out using various binary pattern operators and recognition algorithms on the Yale B database. The experimental results demonstrated that the proposed approach achieved better recognition accuracy than other approaches, and we confirmed that the proposed approach is effective against illumination variation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.506-516
• /
• 1998

In this paper, an algorithm is proposed to detect the malfunction of plasma-etching characteristics using EPD signal trajectories. EPD signal trajectories offer many information on plasma-etching process state, so they must be considered as the most important data sets to predict the wafer states in plasma-etching process. A recent work has shown that EPD signal trajectories were successfully incorporated into process modeling through critical parameter extraction, but this method consumes much effort and time. So Principal component analysis(PCA) can be applied. PCA is the linear transformation algorithm which converts correlated high-dimensional data sets to uncorrelated low-dimensional data sets. Based on this reason neural network model can improve its performance and convergence speed when it uses the features which are extracted from raw EPD signals by PCA. Wafer-state variables, Critical Dimension(CD) and uniformity can be estimated by simulation using neural network model into which EPD signals are incorporated. After CD and uniformity values are predicted, proposed algorithm determines whether malfunction values are produced or not. If malfunction values arise, the etching process is stopped immediately. As a result, through simulation, we can keep the abnormal state of etching process from propagating into the next run. All the procedures of this algorithm can be performed on-line, i.e. wafer to wafer.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.691-698
• /
• 2008

We present a novel method for face detection and recognition methods applicable to video retrieval. The person matching efficiency largely depends on how robustly faces are detected in the video frames. Face regions are detected in video frames using viola-jones features boosted with the Adaboost algorithm After face detection, PCA (Principal Component Analysis) follows illumination compensation to extract features that are classified by SVM (Support Vector Machine) for person identification. Experimental result shows that the matching efficiency of the ensembled architecture is quit satisfactory.

• Journal of Digital Contents Society
• /
• v.10 no.2
• /
• pp.319-326
• /
• 2009

In this paper, we present an algorithm which recognize hand shape in real time using only image without adhering separate sensor. Hand recognizes using edge orientation histogram, which comes under a constant quantity of 2D appearances because hand shape is intricate. This method suit hand pose recognition in real time because it extracts hand space accurately, has little computation quantity, and is less sensitive to lighting change using color information in complicated background. Method which reduces recognition error using principal component analysis(PCA) method to can recognize through hand shape presentation direction change is explained. A case that hand shape changes by turning 3D also by using this method is possible to recognize. Human interface system manufacture technique, which controls a home electric appliance or game using, suggested method at experience could be applied.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.4
• /
• pp.221-226
• /
• 2005

This paper presents a hybrid method for recognizing the faces by using zero mean and principal component analysis. Zero mean is applied to reduce the 1st order statistics to data nonlinearities. PCA is also used to derive an orthonormal basis which directly leads to dimensionality reduction, and possibly to feature extraction of face image. The proposed method has been applied to the problems for recognizing the 20 face images(10 persons * 2 scenes) of 324*243 pixels from Yale face database. The 3 distances such as city-block, Euclidean, negative angle are used as measures when match the probe images to the nearest gallery images. The experimental results show that the proposed method has a superior recognition performances(speed, rate). The negative angle has been relatively achieved more an accurate similarity than city-block or Euclidean.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.85-88
• /
• 2001

Line spectrum pair(LSP) 계수는 양자화 오류에 강하고. 선형 릴간에 효율적이며, 필터의 안정성 판정이 용이하므로 LPC를 대신하여 음성 부호화에 널리 사용되고 있다. 일반적으로 LSP 계수간에는 일정한 상관관계가 나타나고, 이 특성을 이용하면 LSP 계수의 부호량을 줄일 수 있는 가능성이 있나. 본 논문에서는 LSP 계수를 압축하기 위해 principal component analysis(PCA)를 사용한 방법을 제안한다. 제안된 방법에서는 LSP 계수를 Karhunen-Loeve(KL) 변환해 에너지가 집중되는 고유치(eigenvalue)와 고유벡터(eigenvector)를 찾고 값을 양자화 한다. 성능 평가를 위해 2.4kbps MELP(mixed excitation linear prediction)와 8kbps QCELP(qualcumn code excited linear prediction) 음성 부호화기를 사용해 결과 값을 비교했고, 압축률이 증가하는 것을 확인했다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1679-1686
• /
• 2009

Odor sensing system that is electronic nose device and its signal processing technique has potential to become a critical service for the people who require tangibility of sense of smell in the multimedia communication. PCA(Principal Component Analysis) have been used for dimensionality reduction and visualization of multivariate measurement data. PCA is good for estimating importance value by variance of data but, have some limitation for getting meaningful representation from odor sensing system. This paper explain about how to analyze the data of odor sensing system by ICA(Independent Component Analysis). We show that ICA can give better result like sensor drift analysis, dimensionality reduction and data representation by improved discrimination.