• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.397-405
• /
• 2004

Texture mapping is the process of covering 3D models with texture images in order to increase the visual realism of the models. For proper mapping the coordinates of texture images need to coincide with those of the 3D models. When projective images from the camera are used as texture images, the texture image coordinates are defined by a camera calibration method. The texture image coordinates are determined by the relation between the coordinate systems of the camera image and the 3D object. With the projective camera images, the distortion effect caused by the camera lenses should be compensated in order to get accurate texture coordinates. The distortion effect problem has been dealt with iterative methods, where the camera calibration coefficients are computed first without considering the distortion effect and then modified properly. The methods not only cause to change the position of the camera perspective line in the image plane, but also require more control points. In this paper, a new iterative method is suggested for reducing the error by fixing the principal points in the image plane. The method considers the image distortion effect independently and fixes the values of correction coefficients, with which the distortion coefficients can be computed with fewer control points. It is shown that the camera distortion effects are compensated with fewer numbers of control points than the previous methods and the projective texture mapping results in more realistic image.

• The Korean Journal of Ecology
• /
• v.28 no.1
• /
• pp.15-23
• /
• 2005

The black locust (Robinia pseudoacacia L.) forests were studied by a phytosociological approach. Particular attention was given to characterize the vegetation classification, distribution pattern, and ecological flora of the syntaxa classified. A total of 38 releves were analyzed by using Correlation coefficient, UPGMA as the clustering method, and Principal Coordinates Analysis for ordination. Ecological flora analyzed by plant character sets such as scrambler, annual and biennial plants, forest elements, and actual urbanization index. The analyzed data are based on site-releve matrix with relative net contribution degree (r-NCD) of species. A total of 77 families, 193 genera and 323 species of vascular plants are recorded. Camellino-Robinietum pseudoacaciae ass. nov. and Phragmites-Robinia pseudoacacia community were described. Main cluster and ordination could be separated: 1) urban type, 2) rural type, 3) riparian type, and 4) combined type. It is defined that the Robinietum is a representative unit on the black locust afforestation, Phragmites-Robinia community on the lentic zone in the river ecosystem, and Cameliino-Robinietum ailanthetosum altissimae as an urban forest type. The Robinietum was considered as a perpetual community.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.2
• /
• pp.102-107
• /
• 1996

It is difficult to analyze the high speed rolling missile with the generally used missile body fixed coordinates. In this study, we formulate the dynamic equations of the high speed rolling missile with the principal axis of inertia, and make the analytical model of one axis steering missile using pitch/yaw symmetry and complex summation method. With this model we analyze the control characteristics and propose the design considerations of high speed rolling missile with one axis control fin using PNG law in conjuntion with a seeker signal.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.703-708
• /
• 2009

The present paper describes the application of an improved impression transfer vector method (Sakurai et al., 2007) to transform the three basic dimensions (Evaluation, Activity, and Potency) of higher-order impression. First, a set of shapes and surface textures of faces was represented by multi-dimensional vectors. Second, the variation among faces was coded in reduced parameters derived by applying principal component analysis. Third, a facial attribute along a given impression dimension was analyzed to select discriminative parameters from among principal components with higher sensitivity to impressions, and obtain an impression transfer vector. Finally, the parametric coordinates were changed by adding or subtracting the impression transfer vector and the image was manipulated so that its facial appearance clearly exhibits the transformed impression. A psychological rating experiment confirmed that the impression transfer vector modulated three dimensions of higher-order impression. We discussed the versatility of the impression transfer vector method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2363-2371
• /
• 2015

In this paper, we propose a new feature matching algorithm which is robust to the viewpoint change by using the FAST(Features from Accelerated Segment Test) feature detector and the SIFT(Scale Invariant Feature Transform) feature descriptor. The original FAST algorithm unnecessarily results in many feature points along the edges in the image. To solve this problem, we apply the principal curvatures for refining it. We use the SIFT descriptor to describe the extracted feature points and calculate the homography matrix through the RANSAC(RANdom SAmple Consensus) with the matching pairs obtained from the two different viewpoint images. To make feature matching robust to the viewpoint change, we classify the matching pairs by calculating the Euclidean distance between the transformed coordinates by the homography transformation with feature points in the reference image and the coordinates of the feature points in the different viewpoint image. Through the experimental results, it is shown that the proposed algorithm has better performance than the conventional feature matching algorithms even though it has much less computational load.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.1 s.108
• /
• pp.71-80
• /
• 2005

In order to search for ecologically indicative characteristics on the street tree plots in Daegu area, plant communities and their floras were investigated. A total of 105 plots were collected and numerically analyzed by PCoA(Principal Coordinates Analysis). These plots were classified into 4 types containing 139 species, 97 genera, 42 families(including 37 exotic species): urban-dry type, urban-wet type, rural-dry type, rural-wet type. Habitat connectivity to the surrounding vegetation cover, extent and frequency of human impacts, and soil moisture recognizably were the main factors to allow the plots differentiation. Indicative species composition to these four types was generated as Eleusine indica-Eragrostis multicaulis-Oxalis corniculata to the urban-wet, Digitaria ciliaris-Eleusine indica-Eragrostis multicaulis to the urban-dry, Setaria viri-dis-Artemisia-Lactuca indica var. laciniata to the rural-wet, and Setaria viridis-Digitaria ciliaris-Erigeron canadensis to the rural-dry, respectively. Mean species number per plot for rural type was 2.5 times higher than for urban types. Street tree species representative to the rural-wet type is Zelkova serrata, which is a key species of potential natural vegetation in the alluvial land of Daegu area. Street tree plots were characterized by Eleusine indica showing the highest r-NCD value and also C4-assimilation grass plants. Views on the efficacy of the rural-wet type and the reinforcement of vegetation connectivity and soil moisture in rehabilitating street tree plots, are discussed.

• Imaging Science in Dentistry
• /
• v.51 no.2
• /
• pp.167-174
• /
• 2021

Purpose: Sex determination can be done by morphological analysis of different parts of the body. The mastoid region, with its anatomical location at the skull base, is ideal for sex identification. Statistical shape analysis provides a simultaneous comparison of geometric information on different shapes in terms of size and shape features. This study aimed to investigate the geometric morphometry of the inter-mastoid triangle as a tool for sex determination in the Iranian population. Materials and Methods: The coordinates of 5 landmarks on the mastoid process on the 80 cone-beam computed tomographic images(from individuals aged 17-70 years, 52.5% female) were registered and digitalized. The Cartesian x-y coordinates were acquired for all landmarks, and the shape information was extracted from the principal component scores of generalized Procrustes fit. The t-test was used to compare centroid size. Cross-validated discriminant analysis was used for sex determination. The significance level for all tests was set at 0.05. Results: There was a significant difference in the mastoid size and shape between males and females(P<0.05). The first 2 components of the Procrustes shape coordinates explained 91.3% of the shape variation between the sexes. The accuracy of the discriminant model for sex determination was 88.8%. Conclusion: The application of morphometric geometric techniques will significantly impact forensic studies by providing a comprehensive analysis of differences in biological forms. The results demonstrated that statistical shape analysis can be used as a powerful tool for sex determination based on a morphometric analysis of the inter-mastoid triangle.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.54-61
• /
• 2000

A method and results of classification of 4 types metallic wear debris were presented by using their color features. The color image of wear debris was used (or the initial data, and the color properties of the debris were specified by HSI color model. Particle was characterized by a set of statistical features derived from the distribution of HSI color model components. The initial feature set was optimized by a principal component analysis, and multidimensional scaling procedure was used for the definition of classification plane. It was found that five features, which include mean values of H and S, median S, skewness of distribution of S and I, allow to distinguish copper based alloys, red and dark iron oxides and steel particles. In this work, a method of probabilistic decision-making of class label assignment was proposed, which was based on the analysis of debris-coordinates distribution in the classification plane. The obtained results demonstrated a good availability for the automated wear particle analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2054-2061
• /
• 2010

This paper suggests an algorithm for optimal positioning individuals(or observations) with p-dimensional measurements into coordinates of a two dimensional space. A criterion for optimizing the rotation is taken as the consistency of the grouping result obtained by the cluster analysis. This paper introduces the criterion and a transformation matrix for the orthogonal rotation. The criterion of the optimal positioning is that standard groups are placed in each quadrant of the positioning. An optimal angle of the orthogonal rotation is investigated and found by this criterions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.14 no.4
• /
• pp.46-56
• /
• 1990

Stress analysis of axi-symetric body with non-symetric loading and non-symetric given displacements is investigated in this paper using the finite element method. As the non-symetric load and non-symetric given displacements of axi-symetric body are generally periodic functions of angle .theta., the nodal forces and nodal displacements can be expanded in cosine and sine series, that is, Fourier series. Furthermore, using Euler's formula, the cosine and sine series can be converted into exponential series and it is prooved that the related calculus become more clear. Substituting the nodal displacements expanded in Fourier series into the strain components of cylindrical coordinates system, the element strains are expressed in series form and by the principal of virtual work, the element stiffness martix and element load vector are obtained for each order. It is also showed that if the non-symetric loads are even or odd functions of angle ${\theta}$ the stiffness matrix and load vector of the system are composed with only real numbers and relatively small capacity fo computer memory is enough for calculation.