• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.981-987
• /
• 1997

Modern helicopter rotor blades with non-homogeneous cross section composed of anisotropic material rquire highly sophisticated structural analysis. Variation in cross section geometry makes this task of analysis more complicated. Since rotor blades generally are much longer than their lateral dimensions, one-dimensional models seem feasible, at least from a computational point of view. Therefore determination of the principal coordinate system is very important to remove the structural coupling for one-dimensional beam modelling. In this study, shear center, and principal direction. The method will be verified by comparing the results with confirmed experimental results.

• 한국운동역학회지
• /
• 제20권2호
• /
• pp.117-127
• /
• 2010

The axes of upper forearm coordinate system have been considered as principal axis of each segment which was component of elbow joint. The purpose of this study was to verify whether the mean direction(principal axis) of instantaneous axes of rotation for pure flexion/extension motion coincided with the flexion/extension axis of upper forearm coordinate system. The same procedure was done for pronation/supination motion. Furthermore, it was tested indirectly that there was an interaction effect between the two rotational motions. The results showed that most segment coordinate axes statistically were not consistent with the mean directions of flexion/extension and pronation/supination axes of rotation. From the results, it would be concluded that the ISB coordinate systems was proved to be a little valid for human movement analysis. There also was an effect of pronation/supination angles on flexion/extension motion.

• Journal of Mechanical Science and Technology
• /
• 제14권3호
• /
• pp.291-297
• /
• 2000

Modern helicopter rotor blades with non-homogeneous cross sections, composed of anisotropic material, require highly sophisticated structural analysis because of various cross sectional geometry and material properties. They may be subjected by the combined axial, bending, and torsional loading, and the dynamic and static behaviors of rotor blades are seriously influenced by the structural coupling under rotating condition. To simplify the analysis procedure using one dimensional beam model, it is necessary to determine the principal coordinate of the rotor blade. In this study, a method for the determination of the principal coordinate including elastic and shear centers is presented, based upon continuum mechanics. The scheme is verified by comparing the results with confirmed experimental results.

• 원예과학기술지
• /
• 제29권3호
• /
• pp.232-239
• /
• 2011

The genus Acorus is known as an indigenous medicinal plant. Genetic diversity of thirteen accessions of A. calamus and eight of A. gramineus, with an accession of Colocasia antiquorum and two of Iris pseudacorus as outgroups, were evaluated using RAPD markers for cluster analysis and principal coordinate analysis, and NIR spectroscopic profiles for principal component analysis.A total of 371 polymorphic bands were obtained by using the selected 12 random primers. The genetic distances were estimated from 0.03 to 0.31 within A. calamus and from 0.03 to 0.51 within A. gramineus. The dendrogram and three-dimensional plot separated the accessions into four distinct groups (A. calamus, A. gramineus, C. antiquorum, and I. pseudacorus). Moreover, for the diversity among genus Acorus, eleven A. calamus accessions, one A. gramineus accession, and two I. pseudacorus accessions were non-destructively analyzed from their leaves by NIR spectroscopy, which discriminated Acorus accessions like the RAPD analysis. Interestingly, thirteen accessions of A. calamus were clustered into two groups based on RAPD and NIR analyses, which indicates that there are two ecotypes of A. calamus in Korea. An accession (CZ) of A. calamus with yellow stripe on leaves was closely grouped with another (CX) at a genetic distance (GD) of 0.03, which shows that the stripe trait might be generated by chimeric mutation. The genetic distance between A. calamus and A. gramineus was revealed to be farthest from 0.80 to 0.88 GD. In genus Acorus the genetic diversity and genetic variation were identified by using RAPD marker technique and non-destructive NIRs.

• The Korean Journal of Ecology
• /
• 제26권5호
• /
• pp.281-287
• /
• 2003

울산 무제치습원에 대한 생태식물상(ecological flora)과 군락유형분석이 이루어졌다. 군락유형분석은 Zurich-Montpelliar의 연구방법으로 식생유형 분류와 분포적 특성, 그리고 종조성적 군락동태를 파악하기 위하여 식생자료간의 거리(유사성)와 속성에 대한 집괴분석법 및 PCoA (Principal Coordinate Analysis) 좌표결정법이 적용되었다. 주요 감시종 13종을 포함한 습지성 식물종 49종과 중간습원 식물군락을 포함한 6개의 식물군락이 분류되었다. 식생유형은 쇠털골-좀고추나물군락, 바늘골-끈끈이주걱군락, 진퍼리새-하늘산제비난군집(신칭), 오리나무-진퍼리새군락, 소나무-억새군락, 졸참나무-은방울꽃군락 등이 기재되었으며, 동북아 산지성이탄습지의 중간습원을 대표하는 식생으로 진퍼리새군강이 새롭게 제창되었다. PCoA는 무제치습원 속에 현존하는 식물군락간의 종조성적 상이성이 토양의 수분구배와 식물군락의 층구조(생체량)에 대응하는 네 개의 천이식생형(쇠풀골형, 진퍼리새형, 억새형, 삼림형)으로 구분하였으며, 건생의 타생천이계열과 습생의 자생천이계열이 존재하고 있음이 밝혀졌다. 중간습원으로서 무제치습원에 대한 식생의 종조성과 분포의 지속성은 토사 및 영양염류의 비정상적 유입을 방지하는 습원생태계의 수문체제와 토지조건의 적극적인 고려로부터 가능하다는 것을 밝혔다.

• Mycobiology
• /
• 제49권1호
• /
• pp.61-68
• /
• 2021

Agaricus bisporus, commonly known as the button mushroom, is widely cultivated throughout the world. To breed new strains with more desirable traits and improved adaptability, diverse germplasm, including wild accessions, is a valuable genetic resource. To better understand the genetic diversity available in A. bisporus and identify previously unknown diversity within accessions, a phylogenetic analysis of 360 Agaricus spp. accessions using single-nucleotide polymorphism genotyping was performed. Genetic relationships were compared using principal coordinate analysis (PCoA) among accessions with known origins and accessions with limited collection data. The accessions clustered into four groups based on the PCoA with regard to genetic relationships. A subset of 67 strains, which comprised a core collection where repetitive and uninformative accessions were not included, clustered into 7 groups following analysis. Two of the 170 accessions with limited collection data were identified as wild germplasm. The core collection allowed for the accurate analysis of A. bisporus genetic relationships, and accessions with an unknown pedigree were effectively grouped, allowing for origin identification, by PCoA analysis in this study.

• Interaction and multiscale mechanics
• /
• 제1권2호
• /
• pp.279-301
• /
• 2008

This paper develops a 3D homogenization based continuum damage mechanics (HCDM) model for fiber reinforced composites undergoing micromechanical damage under monotonic and cyclic loading. Micromechanical damage in a representative volume element (RVE) of the material occurs by fiber-matrix interfacial debonding, which is incorporated in the model through a hysteretic bilinear cohesive zone model. The proposed model expresses a damage evolution surface in the strain space in the principal damage coordinate system or PDCS. PDCS enables the model to account for the effect of non-proportional load history. The loading/unloading criterion during cyclic loading is based on the scalar product of the strain increment and the normal to the damage surface in strain space. The material constitutive law involves a fourth order orthotropic tensor with stiffness characterized as a macroscopic internal variable. Three dimensional damage in composites is accounted for through functional forms of the fourth order damage tensor in terms of components of macroscopic strain and elastic stiffness tensors. The HCDM model parameters are calibrated from homogenization of micromechanical solutions of the RVE for a few representative strain histories. The proposed model is validated by comparing results of the HCDM model with pure micromechanical analysis results followed by homogenization. Finally, the potential of HCDM model as a design tool is demonstrated through macro-micro analysis of monotonic and cyclic damage progression in composite structures.

• 한국지진공학회논문집
• /
• 제11권5호
• /
• pp.33-47
• /
• 2007

실무에서 지진해석법으로 널리 쓰이는 방법은 등가정적해석법과 응답스펙트럼해석법이다. 이 중 등가정적해석법에 의한 밑면전단력은 구조물의 주축을 해석좌표축에 어떻게 배치하는가와 상관없이 일관된 값을 나타낸다. 그러나 응답스펙트럼해석은 해석좌표 축에 구조물의 주축을 다르게 배치하여 해석을 수행하면 밑면전단력이 각기 다르게 발생한다. 이는 엔지니어가 구조물을 설계함에 있어 구조물의 주축을 해석좌표축에 어떻게 설정했는지에 따라 설계부재력이 모두 달라질 수 있음을 뜻한다. 또한 응답스펙트럼해석은 지진을 가한 방향의 직각방향에서 적지 않은 응답이 발생하는 경우가 생긴다. 한방향 해석에 대한 X와 Y축을 따라 분리되는 이러한 양방향 응답은 보정계수 산정시 쓰이는 밑면전단력을 작게 만들며 이는 결과적으로 보정계수를 크게하여 과다설계의 우려가 생긴다. 내진설계시 발생하는 이러한 문제점을 해결하기 위하여 본 논문에서는 수평의 강성 차이에 따라 구조물을 크게 세 가지(양방향 대칭 구조물, 한방향 비대칭구조물, 양방향 비대칭구조물)로 분류하여 각각의 경우에 대하여 간단한 모델을 선정하고 구조물의 주축을 회전시켜가면서 지진해석을 수행하였다. 각 경우의 예제구조물이 가지는 동적특성과 설계부재력을 살펴보았다. 현재 실무에서 적용되는 보정계수 산정법에 의한 설계부재력과 앞선 문제들을 해결하고자 본 논문에서 제안하는 새로운 보정계수 산정법에 의한 설계부재력을 비교하여 제안하는 보정계수 산정법의 효율성을 검토하였다. 그 결과로 새로 제안된 보정계수 산정법에 의하여 설계부재력을 산정하는 것이 내진설계시 엔지니어들이 겪을 수 있는 혼란을 덜어주며 경제적인 부재설계가 가능함을 알 수 있었다.

• Journal of Animal Science and Technology
• /
• 제64권6호
• /
• pp.1226-1236
• /
• 2022

Mongolian horses are one of the oldest horse breeds, and are very important livestock in Mongolia as they are used in various fields such as transportation, food (milk, meat), and horse racing. In addition, research and preservation on pure Mongolian breeds are being promoted under the implementation of the new Genetics of Livestock Resources' act in Mongolia. However, despite the implementation of this act, genetic research on Mongolian horses using microsatellites (MS) has not progressed enough. Therefore, this study was conducted to analyze the genetic polymorphism of five breeds (Gobi shankh, Tes, Gal shar, Darkhad, and Undurshil) using 14 MS markers recommended by International Society for Animal Genetics (ISAG). The mean number of alleles (MNA) was 8.29, expected heterozygosity frequency (H_Exp) was 0.767, observed heterozygosity frequency (H_Obs) was 0.752, and polymorphism information content (PIC) was 0.729. The Nei's genetic distance analysis showed that the genetic distance between Gobi shankh and Darkhad horses was the farthest, and the other three breeds, Tes, Gal shar, and Undurshil were found to be close to each other. Similarly, the principal coordinate analysis (PCoA) and factorial correspondence analysis (FCA) showed that the Gobi shankh and Darkhad horses were genetically distinct from other breeds. On the other hand, it appears that Tes, Gal shar, and Undurshil horses, which are genetically similar, most likely interbred with each other. Therefore, it is expected that these results will help the conservation of genetic resources in Mongolia and the establishment of policies related to Mongolian horses.

• Structural Engineering and Mechanics
• /
• 제4권4호
• /
• pp.437-450
• /
• 1996

A study on the behaviour of fibre reinforced concrete deep beams with and without web openings is carried out using nonlinear finite element analysis. Eight node isoparametric plane stress elements are employed to model the fibre reinforced concrete materials. Steel bars are treated using a compatible three node truss elements. The constitutive equations for fibre reinforced concrete materials take into account the softening effect of co-existing shear strains. Element stiffness at each step is formulated based on the tangent modulus at the current level of principal strains. Transformation between principal directions and global coordinate system is imposed. Comparison of analytical results with experimental values indicates reasonably good agreement. The proposed numerical model can be used to study the behaviour of this composite structures of practically any geometries.