• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1341-1344
• /
• 2001

Comparison of sulfur dioxide primary standard gases of the Korea Research Institute of Standards and Science (KRISS, Korea) and the National Physical Laboratory (NPL, UK) was performed. 100 ${\times}$10-6 mol/mol and 1,000 ${\times}$10-6 mol /mol primary standard gases (designated NPL S115 and S114, respectively) prepared gravimetrically and validated in NPL were used as transfer standards. Transfer standards were analyzed by NDIR sulfur dioxide analyzer and compared with KRISS PSM 112-03-624 and PSM 112-03-625 prepared gravimetrically. Adsorption corrected relative deviations of the primary standard gases were agreed to within 0.1%, and this agreement is within the expanded uncertainties (k = 2) of the primary standards at the two laboratories.

• 한국대기환경학회지
• /
• 제34권2호
• /
• pp.331-341
• /
• 2018

Hazardous air pollutants(HAPs) in the atmosphere are regulated as major air pollutants in Korea by the Air Pollution Control Act. In order to manage and control HAPs, accurate standards, which are traceable to the International System of Units(SI), are required. In this study, primary standard gas mixtures(PSMs) of volatile organic compounds(VOCs) which are specified as HAPs were developed at $1{\mu}mol/mol$ levels. The selected fourteen VOCs include Benzene, Toluene, Ethylbenzene, m-Xylene, Styrene, o-Xylene, Chloroform, 1,1,2-Trichloroethane, Trichloroethylene, Tetrachloroethylene, 1,1-Dichloroethane, Carbon tetrachloride, 1,3-Butadiene, and Dichloromethane. The HAPs PSMs were gravimetrically prepared in aluminum cylinders and their consistency was verified within the relative expanded uncertainty of 0.71% (k=2). Potential adsorption loss onto the internal surface of cylinders was estimated by cylinder-to-cylinder division method. No adsorption loss was observed within the uncerainty of 0.53%. The long-term stability of the HAPs PSMs was evaluated comparing with freshly prepared HAPs PSMs. The HAPs PSMs were stable for one year within the uncertainty of 0.38%. The final uncertainty of the PSMs was determined by combining the preparation uncertainty, verification uncertainty, and stability uncertainty. Finally, traceable and stable HAPs PSMs at $1{\mu}mol/mol$ levels were developed with the uncertainty of less than 0.76% in high-pressure aluminum cylinders.

• 분석과학
• /
• 제30권5호
• /
• pp.287-294
• /
• 2017

천연가스는 산업의 발전으로 인하여 수요가 계속 증가하고 있어 도입물량 부족 현상이 일어나 수급이 점차 불안정해질 것으로 예상된다. 액화천연가스 외에 파이프라인 천연가스 및 대체 천연가스등 다양한 형태의 가스 도입과 개발로 수요를 충당해야 할 필요성이 있다. 도입된 PNG의 성분과 농도를 정확하게 측정해야 한다. 이에 따른 천연가스 내에 있는 미량 성분인 탄화수소류($C_6-C_{10}$)의 정확한 측정이 요구되어 표준가스의 개발이 필수적이다. 이 연구에서 개발한 일차 표준물질에 대한 조성과 농도는 $10-30{\mu}mol/mol$의 헥산, 헵탄, 옥탄, 노난, 데칸이며 바탕가스는 메탄이다. 탄화수소류($C_6-C_{10}$)의 표준가스 제조는 각 성분 원료가스에 대한 순도분석이 완료된 가스를 ISO 6142에 근거하여 소급성이 있는 중량법으로 알루미늄 실린더에 제조하였다. 제조된 표준가스는 분석기로 표준가스간의 제조일치성, 실린더의 흡착성, 안정성 변화 및 불확도 평가를 하였다. 결과는 알루미늄 실린더에서 내부표면의 흡착 손실이 적고 장기 안정성이 매우 우수하다는 것을 알 수 있었고, 헥산, 헵탄, 옥탄, 노난, 데칸의 농도 $10-30{\mu}mol/mol$ 수준에서 불확도 0.79-1.63 %이내의 표준가스를 개발하였다.

• 분석과학
• /
• 제27권6호
• /
• pp.357-363
• /
• 2014

아이소프렌은 자연기원의 휘발성 유기화합물 (BVOCs) 중의 하나로 대류권 오존 생성 및 포름알데히드의 근원으로 알려져 있다. 또한, 아이소프렌은 호흡가스에 포함된 미량 성분으로 폐암과 같은 질병의 진단마커로 사용되기도 하기 때문에 대기 중 아이소프렌의 정확한 측정을 위해 신뢰성 있는 가스 표준물질이 요구되고 있다. 본 연구에서는 아이소프렌 측정용 일차표준가스의 개발을 위해 중량법에 의한 제조 및 특성평가를 수행하였다. 독립적으로 제조한 일차표준가스들의 농도를 가스크로마토그래프-불꽃이온화검출기(GC-FID)로 비교하여 0.01%의 순도를 포함한 중량법에 의한 제조 불확도와 0.08% 수준의 제조 재현성을 확인하였다. 제조한 일차표준가스는 14개월간 동안 1.3% 수준의 안정성을 보였다. 원료의 순도, 질량측정(질량값), 제조 재현성, 흡착성 및 장기 안정성을 모두 고려하여 결정한 $10{\mu}mol/mol$ 수준 아이소프렌 일차표준가스 인증값의 상대 확장불확도는 2.8%(95%의 신뢰수준, k=1.96)이었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.121-126
• /
• 2009

This study analyzed the standard school's energy usage and patterns as the zero-energy goal of primary school building, and proposed the energy reduction process of school building using energy analysis computing simulation tool. As a analysis simulation tool, Visual DOE 4.0 is used. For analysis of actual energy usage, selected primary school that is standard in the nation's energy consumption. Standard of the school's energy consumption analysis were devided into electric and gas energy. Input parameters of the simulation program based on the literature material and field survey material. after, but it was calibrated to comparison with the standard school's energy consumption. Finally, its energy usage analyzed by component and made the priority order of energy saving. Applied energy saving technologies are envelopment insulation, high efficiency lighting, high performance HAVC system and used active equipment system of solar collector and photovoltaic generation for additional savings.

• 한국가스학회지
• /
• 제22권2호
• /
• pp.46-51
• /
• 2018

산업이 급속하게 발전함에 따라 자연 대기에서 악취를 유발하는 매우 적은 양의 황화수소가 존재합니다. 매립 및 하폐수처리장에서 나오는 황화수소 성분은 대기에 존재하므로 많은 민원이 발생됩니다. 민원이 발생하는 악취가스를 측정하기 위해 $10{\mu}mol/mol$ 농도 수준의 황화수소 인증표준물질(Certified reference material)을 개발하고자 하였다. 질소 안에 $10{\mu}mol/mol$ 수준의 황화수소 가스 제조는 ISO 6142에 의한 중량법을 사용하였다. 4 개의 알루미늄 실린더에 가스 CRM을 제조하고 GC-AED로 그 농도를 확인했습니다. 제조의 불확도는 0.50 % 미만이었고, 제조일치성은 0.22 %이었다. 실린더의 내부 흡착은 1500 psi에서 0.10 %이었고 1 년 동안 장기간 안정한 것으로 평가되었다. 이 황화수소 CRM의 제조 일치성, 실린더의 흡착 및 장기 안정성에 대한 상대 확장불확도는 1.05 %(신뢰도 95 %, k = 2) 이내로 개발되었다.

• 한국대기환경학회지
• /
• 제32권3호
• /
• pp.320-328
• /
• 2016

Among biogenic volatile organic compounds (BVOCs) in the natural ecosystem, monoterpenes, along with isoprene, play important roles in atmospheric chemistry and make significant impacts on air pollution and climate change, especially due to their contribution to secondary organic aerosol production and photochemical ozone formation. It is essential to measure monoterpene concentrations accurately for understanding their oxidation processes, emission processes and estimation, and interactions between biosphere and atmosphere. Thus, traceable calibration standards are crucial for the accurate measurement of monoterpenes at ambient levels. However, there are limited information about developing calibrations standards for monoterpenes in pressured cylinders. This study describes about developing primary standard gas mixtures (PSMs) for monoterpenes at about 2 nmol/mol, near ambient levels. The micro-gravimetric method was applied to prepare monoterpene (${\alpha}$-pinene, 3-carene, R-(+)-limonene, 1,8-cineole) PSMs at $10{\mu}mol/mol$ and then the PSMs were further diluted to 2 nmol/mol level. To select an optimal cylinder for the development of monoterpene PSMs, three different kinds of cylinders were used for the preparation and were evaluated for uncertainty sources including long-term stability. Results showed that aluminum cylinders with a special internal surface treatment (Experis) had little adsorption loss on the cylinder internal surface and good long-term stability compared to two other cylinder types with no treatment and a special treatment (Aculife). Results from uncertainty estimation suggested that monoterpene PSMs can be prepared in pressured cylinders with a special treatment (Experis) at 2 nmol/mol level with an uncertainty of less than 4%.

• Bulletin of the Korean Chemical Society
• /
• 제25권2호
• /
• pp.233-236
• /
• 2004

Total impurity analysis of a primary standard solution is one of the essential procedures to determine an accurate concentration of the standard solution by the gravimetry. Bi impurity is determined in Pb standard solutions by inductively coupled plasma mass spectrometry (ICP-MS). The direct nebulization of the Pb standard solution produces a significant amount of the Pb matrix-induced molecular ions which give rise to a serious spectral interference to the Bi determination. In order to avoid the spectral interference from the interferent $^{208}PbH^+$, the hydride generation method is employed for the matrix separation. The Bi hydride vapor is generated by reaction of the sample solution with 1% sodium borohydride solution. The vapor is then directed by argon carrier gas into the ICP after separation from the mixture solution in a liquid-gas separator made of a polytetrafluoroethylene membrane tube. The presence of 1000 ${\mu}$g/mL Pb matrix caused reduction of the bismuthine generation efficiency by about 40%. The standard addition method is used to overcome the chemical interference from the Pb matrix. Optimum conditions are investigated for the hydride-generation ICPMS. The detection limit of this method is 0.5 pg/mL for the sample solutions containing 1000 ${\mu}$g/mL Pb matrix.

• 한국가스학회지
• /
• 제25권4호
• /
• pp.49-56
• /
• 2021

액화석유가스(Liquefied Petroleum Gas)는 Propane(C₃H₈)과 Butane(C₄H₁₀)을 주성분으로 한 가스를 액화한 것으로 구분된다. LPG는 혼합 성분에 따라 품질의 차이가 커 성분 함량을 정확하게 측정하는 것이 중요하다. 이와 같은 물질은 혼합물의 성분별로 상온에서는 액체와 기체가 같이 공존해 정확한 측정이 까다롭다. 따라서 탄화수소의 성분별 농도의 측정 불확도가 높아 실제 함량 기준과 많은 차이가 발생하는 문제점을 안고 있다. 그러므로 탄화수소 물질의 조성과 정확한 농도 측정을 위해 혼합 액체 프로판 표준가스의 개발이 필요하였다. 혼합 액체 프로판 표준가스는 ISO-6142(2015)의 중량법으로 벨로즈형 정압실린더에 제조되었다. 제조한 4병의 표준가스에서 균질성이 GC-FID로 확인되었다. 제조 상대확장불확도는 0.01 % - 0.30 %, 균질성은 0.03 % - 0.25 %이었다. 이 혼합 액체 프로판 표준가스에서 중량법, 제조 일치성, 실린더 흡착 여부 및 장기 안정성에 대한 상대확장불확도는 0.26 % - 1.39 %(신뢰도 약 95 %, k=2)이내로 개발되었다.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.38-44
• /
• 2000

Compared to other waste, waste tire has much discharge quantity and calorie. When we use waste heat from waste tire, it can be definitely better substitute energy than coal and anthracite in high oil price age. To use as a basic data for providing low cost and highly effective heating system, following conclusion was founded. Annual waste tire production was 19,596 million in 1999, Recycling ratio was almost 55% and more than 8.78 million was stored. Waste tire has lower than 1.5% sulfur contain ratio which is resource of an pollution, So it is a waste fuel which can be combustion based on current exhaust standard value without any extra SOx exclusion materials. Waste tire has 9,256Kcal/kg calorific value and it is higher than waste rubber, waste rubber, waste energy as same as B-C oil. When primary and second air quantity was 1.6, 8.0 Nm$^3$/min, dry gas production time was 270min and total combustion time was 360 min. In the SOx, NOx, HC of air pollution material density were lower than exhaust standard value at the back of cyclone and dusty than exhaust standard value without dust collector.