• 제목/요약/키워드: Primary Head

검색결과 710건 처리시간 0.029초

Effect of PBD to improve soft marine sedimentary ground

  • Jeong, Jin-Seob;Hwang, Woong-Ki;Jeong, Choong-Gi;Kim, Tae-Hyung
    • 한국항해항만학회지
    • /
    • 제33권2호
    • /
    • pp.119-125
    • /
    • 2009
  • The effect of plastic board drains (PBDs)on ground improvement was checked out considering three crucial factors: ground settlement, undrained shear strength, and residual water head. First, the settlement analysis including initial settlement induced by reclamation of sand mat was conducted by back calculation analysis with measured data. Its result showed toot the PBDs used for this site worked well on improving soft ground. Secondly, the undrained shear strength was investigated by laboratory and in-situ tests including unconsolidated-undrained triaxial compression (UU) tests, unconfined compression tests, in-situ vane tests, and cone penetration tests. From the test results, they showed that the undrained shear strength of the improved ground by PBDs was significantly increased as well as the strength increasing ratio especially $10{\sim}15m$ below the ground surface on site. Thirdly, the residual water head measurement from the in situ dissipation test was found the same as the static water head, which indicated primary consolidation was completed and the effect of soil improvement with PBDs can be confirmed.

대퇴 골두내 무혈성괴사 영역에 따른 응력변화 분석 -3차원 유한요소법을 이용한 분석- (A Finite Element Analysis of the Effects of Necrotic Area on Stresses in Early Osteonecrosis of Femoral Head)

  • 강승백;주원;김영민;김희중;최재봉;최귀원
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1996년도 추계학술대회
    • /
    • pp.349-350
    • /
    • 1996
  • Using FEM, we analyzed the stress changes on early osteonecrosis of femoral head as the necrotic area increases. A 3D FEM model of proximal femur was made from the CT scam data of fresh frozen adult proximal femur with the material properties from literature. The model consisted of 5994 elements and 5275 nodes. FE analyses were peformed using MSC/NASTRAN. At normal states, stress transmission is mainly along the primary compression trabeculae(PCT). Until 60% involvement of PCT with necrotic lesion, stress transmission is still along the remained PCT. When the PCT involvement is from 60% to 85%, stress transmission is along the PCT and margin of the necrotic lesion. When involvement is more than 85%, stress is mostly transferred to posterior part of femoral head.

  • PDF

Common Sites, Etiology, and Solutions of Persistent Septal Deviation in Revision Septoplasty

  • Jin, Hong Ryul;Kim, Dae Woo;Jung, Hahn Jin
    • Clinical and Experimental Otorhinolaryngology
    • /
    • 제11권4호
    • /
    • pp.288-292
    • /
    • 2018
  • Objectives. To investigate the common causes of persistent septal deviation in revision septoplasty and to report the surgical techniques and results to correct them. Methods. A total of 100 consecutive patients (86 males) who had revision septoplasty due to persistent septal deviation from 2008 and 2014 were included in the study. Their mean age was 35.6 years and the mean follow-up duration was 9.1 months. Presenting symptoms, sites of persistent septal deviation, techniques used to correct the deviation, and surgical results were reviewed. Results. The mean interval between primary and revision surgery was 6.2 years. Forty-eight patients received revision septoplasty and 52 received revision septoplasty combined with rhinoplasty. Nasal obstruction was the most presenting symptom in almost all patients. The most common site of persistent septal deviation was middle septum (58%) followed by caudal septum (31%). Correcting techniques included further chondrotomy and excision of deviated portion in 76% and caudal batten graft in 39%. Rhinoscopic and endoscopic exams showed straight septum in 97% and 92 patients had subjective symptom improvement postoperatively. Conclusion. Middle septum and caudal septum were common sites of persistent deviation. Proper chondrotomy with excision of deviated middle septum and correction of the caudal deviation with batten graft are key maneuvers to treat persistent deviation.

기능성 부갑상선암 (Functioning Parathyroid Carcinoma - A Case Report -)

  • 임대진;최진섭;한지영;임승길;박정수
    • 대한두경부종양학회지
    • /
    • 제9권1호
    • /
    • pp.56-62
    • /
    • 1993
  • The parathyroid carcinoma is a rare cause of primary hyperparathyroidism. There was approximately 170 reports in the would literature. and only two documented cases in Korean literature. It is still difficult to distinguish. histologically, benign from malignant parathyroid tumors. However, if diagnotic criteria are that strict, it can be suscessfully cured by initial operation. The initial operation should be an en bloc resection of the tumor, avoiding rupture of the tumor capsule and spillage of tumor cells. This report details the management of a 51 year old female with functioning parathyroid carcinoma who underwent an en bloc resection of the tumor at the time of initial operation.

  • PDF

단류식 창조발전의 조력발전소 최적화 운영 Model 개발에 관한 연구 (A Study on Developement of Optimization Model for Single Action Tidal Power Station)

  • 김현한;김만기;김준규;옥연호;김광호;정종찬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.1144_1145
    • /
    • 2009
  • Tidal power station is using the difference of the ebb and flow and the single action tidal power is dependent on tide amplitude and basin volume. Therefore the inflow of basin in rainy season has also effect on the daily power. Also if operating units are changed then starting head too changed. Therefore the number of units are very important for the optimization model. According to our study the primary point when we make a determination of optimization is starting head and governorl control mode. On this study optimization model for tidal power station is considered all of this conditions.

  • PDF

디젤 soot의 크기 측정을 위한 TIER-LII 센서헤드 설계기술 개발 (A Development of TIER-LII Sensor Head Design for Diesel Soot Size Measurement)

  • 서동규;김덕진;정재우;윤여성;이춘범
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.215-220
    • /
    • 2004
  • The TIER-LII system was established and evaluated using carbon black for diesel particulate size measurement. It contains a new designed sensor head which makes it easier to be measured. Through LII signal analysis of some parameters, we can understand that there were few correlations observed in effect of temperature, shield gas flow rate, and mixture flow rate.. However, an amount of difference was observed in different size of particulates.

  • PDF

The Realization of Meaning Differences between English Resultative and Depictive Predication Constructions in Focus Theory

  • Noh, Bokyung
    • 한국영어학회지:영어학
    • /
    • 제1권2호
    • /
    • pp.273-293
    • /
    • 2001
  • In this paper, I examine the phenomenon of English depictive and resultative predications with specific attention given to the relation between accentual focus structure and argument structure. The goal is pursued primarily through a production experiment and analyses to establish the interconnection between focus and argument structure. The central claim is that the resultative predicate forms a complex predicate with a main verb, whereas the depictive predicate behaves as an adjunct in English secondary constructions. The result shows that the relationship between focus and accent depends at least in part on their argument structure, confirming that current focus theories about argument-head and adjunct-head structures in primary predication constructions can be extended to secondary predication constructions.

  • PDF

비순 피부편을 이용한 구강저 재건 치험 1례 (Reconstrution with Nasolabial Flap Following Excision of Epidermoid Carcinoma of Mouth Floor)

  • 김광문;정영석;장미숙
    • 대한두경부종양학회지
    • /
    • 제7권2호
    • /
    • pp.99-103
    • /
    • 1991
  • 상악치조(alveolus), 구개, 편도부의 종양으로 술후 결손을 재건하기에는 여러 피부편이 이용되어 왔지만 그 중에서 최근 풍부한 피하 혈과 공급과 풍부한 조직량으로 하부 비순 피부편을 이용하는 것이 유용하다.

  • PDF

미세패턴 구현을 위한 잉크젯 응용 기술 (Fine resolution patterning aided by inkjet printing)

  • 신동윤;김동수;함영복;최병오
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2006년도 춘계학술대회 논문집
    • /
    • pp.587-588
    • /
    • 2006
  • Drop-on-Demand (DOD) inkjet printing technology, especially piezo-typed, has been paid attention by industries due to its inherent nature of unbeatable material usage and low cost manufacturing cost. Despite of these key advantages over any other competing manufacturing technologies, the primary disadvantage has been considered as its limited capability to produce fine resolution patterns with a commercially available DOD inkjet print head. Although the main effort has been focused on the production of a DOD inkjet print head with smaller nozzles to overcome this challenging issue, an alternative approach could be taken and it would enable to expand the employment of DOD inkjet printing technology to applications requiring fine patterns further more.

  • PDF

A Simple a.c. Magnetic Susceptometer Using self-inductance Measurement of a Single Coil Mounted on a Cryostat Cold Head

  • Dho, Joong-Hoe
    • Journal of Magnetics
    • /
    • 제13권4호
    • /
    • pp.177-181
    • /
    • 2008
  • A very simple a.c. magnetic susceptometer for use in a helium closed cycle cryostat is reported in this paper. This simple setup has only a single bobbin-less copper coil, instead of the primary coil and two secondary coils typically used in mutual-inductance types. The single bobbin-less copper coil is directly mounted on the cryostat cold head. A sample is attached on the inside wall of the copper coil using a thermal contact material and its a.c. magnetic susceptibility is obtained from the measurement of the self-inductance of the sample coil using an LCR meter or an impedance analyzer. Experimental details are described and illustrative measurements on magnetic and superconducting materials as a function of temperature are included. The performances and limitations of this simple a.c. magnetic suceptometer are also discussed.