• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.907-914
• /
• 2018

In this article, we conducted molecular dynamics simulations to investigate the effect of applied strain and temperature on irradiation-induced damage in alpha-zirconium. Cascade simulations were performed with primary knock-on atom energies ranging between 1 and 20 KeV, hydrostatic and uniaxial strain values ranging from -2% (compression) to 2% (tensile), and temperatures ranging from 100 to 1000 K. Results demonstrated that the number of defects increased when the displacement cascade proceeded under tensile uniaxial hydrostatic strain. In contrast, compressive strain states tended to decrease the defect production rate as compared with the reference no-strain condition. The proportions of vacancy and interstitial clustering increased by approximately 45% and 55% and 25% and 32% for 2% hydrostatic and uniaxial strain systems, respectively, as compared with the unstrained system, whereas both strain fields resulted in a 15-30% decrease in vacancy and interstitial clustering under compressive conditions. Tensile strains, specifically hydrostatic strain, tended to produce larger sized vacancy and interstitial clusters, whereas compressive strain systems did not significantly affect the size of defect clusters as compared with the reference no-strain condition. The influence of the strain system on radiation damage became more significant at lower temperatures because of less annealing than in higher temperature systems.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권10호
• /
• pp.1417-1425
• /
• 2014

The selection of morphologically normal spermatozoa is critical to obtain high breeding performances in boar breeding farms and artificial insemination (AI) centers. Parameters for the selection of semen mainly include total sperm motility, concentration, and morphology. However, these primary parameters are often not reliable for discriminating between normal and abnormal, non-fertilizable spermatozoa. The present study was designed to compare the motion characteristics, fertilization ability using in vitro fertilization (IVF), and acrosome formation of the semen from boars having low (boar number 2012) and normal (boar number 2004 and 2023) breeding performances. The ultimate goal was to identify additional simple and easy criteria for the selection of normal sperm. There was no significant difference between boar 2004 and boar 2023 sperm total motility in computer assisted sperm analysis. However, boar number 2012 semen presented a significantly reduced population of rapid moving spermatozoa and an increased population of slow moving spermatozoa compared to boar numbers 2004 and 2023. Analysis of detailed motion characteristics revealed that sperm from boar number 2012 had significantly reduced motility in progressiveness, average path velocity, straight-line velocity (VSL), curvilinear velocity (VCL), straightness, and linearity. The assessment of the fertilizing ability by IVF also showed that sperm from boar number 2012 showed a fertility rate of 3.4%, whereas sperm from boar number 2023 had a fertility rate of 75.45%. Interestingly, most of the sperm nuclei were found on the peripheral area of the oocytes, suggesting that the sperm from boar number 2012 lacked penetration ability into the oocyte zonapellucida. The acrosome formation analysis using Pisum sativum agglutinin staining demonstrated that the sperm from boar number 2012 had a defect in acrosome formation. Consequently, primary parameters for selecting semen before AI such as motility are not sufficient to select normal and fertilizable spermatozoa. In conclusion, the present study suggests that the acrosome staining and detailed motion characteristics such as progressiveness, VCL, and VSL should be included in determining semen quality together with primary parameters for successful AI and high breeding performance in the swine industry.

• 한국재료학회지
• /
• 제12권7호
• /
• pp.580-586
• /
• 2002

The effect of processing and designing variables such as pouring temperature(1400 or $1500^{\circ}C$), inoculation and risering design(T and H type) on the formation of defects such as external depression, primary and secondary shrinkage cavities in GC150 gray cast iron was investigated. In T type risering design, external depression or primary shrinkage cavity due to liquid contraction was formed in all of the eight cases. Regardless of its modulus value, the riser could not function properly in T type risering design because directional solidification was not promoted toward the riser. On the other hand, the four cases of H type risering design in which thermal sleeves were set onto the risers produced defect-free castings. In both types of the risering designs, secondary shrinkage cavity caused by solidification contraction was not observed in the casting because of the expansion pressure due to graphite precipitation and the application of rigid pep-set mold. The degree of external depression or primary shrinkage cavity was reduced with lowered pouring temperature. The effect of inoculation was diminished because of the high carbon equivalent of GC 150 gray cast iron.

• Journal of Periodontal and Implant Science
• /
• 제40권5호
• /
• pp.211-219
• /
• 2010

Purpose: Fibronectin (FN) has been shown to stimulate bone regeneration in animal models. The aim of this study was to evaluate the capacity of bovine bone mineral coated with synthetic oligopeptides to enhance bone regeneration in rabbit calvarial defects. Methods: Oligopeptides including fibrin-binding sequences of FN repeats were synthesized on the basis of primary and tertiary human plasma FN structures. Peptide coated and uncoated bone minerals were implanted into 10 mm calvarial defects in New Zealand white rabbits, and the animals were sacrificed at 4 or 8 weeks after surgery. After specimens were prepared, histologic examination and histomorphometric analysis were performed. Results: At 4 weeks after surgery, the uncoated groups showed a limited amount of osteoid formation at the periphery of the defect and the oligopeptide coated groups showed more osteoid formation and new bone formation in the center of the defect as well as at the periphery. At 8 weeks, both sites showed increased new bone formation. However, the difference between the two sites had reduced. Conclusions: Fibrin-binding synthetic oligopeptide derived from FN on deproteinized bovine bone enhanced new bone formation in rabbit calvarial defects at the early healing stage. This result suggests that these oligopeptides can be beneficial in reconstructing oral and maxillofacial deformities or in regenerating osseous bone defects.

• BMB Reports
• /
• 제52권10호
• /
• pp.619-624
• /
• 2019

The primary cilium is a microtubule-based structure projecting from a cell. Although the primary cilium shows no motility, it can recognize environmental stimuli. Thus, ciliary defects cause severe abnormalities called ciliopathies. Ciliogenesis is a very complex process and involves a myriad of components and regulators. In order to excavate the novel positive regulators of ciliogenesis, we performed mRNA microarray using starved NIH/3T3 cells. We selected 62 murine genes with corresponding human orthologs, with significantly upregulated expression at 24 h after serum withdrawal. Finally, calpain-6 was selected as a positive regulator of ciliogenesis. We found that calpain-6 deficiency reduced the percentage of ciliated cells and impaired sonic hedgehog signaling. It has been speculated that this defect might be associated with decreased levels of ${\alpha}-tubulin$ acetylation at lysine 40. This is the first study to report a novel role of calpain-6 in the formation of primary cilia.

• 대한치과의사협회지
• /
• 제50권6호
• /
• pp.312-321
• /
• 2012

Permanent canine are very important teeth in point of function as well as esthetic. Therefore impaction of canines is a frequently encountered clinical problems. The incidence of impaction ranges between 1-3%. The cause of canine impaction can be result of ectopic position of tooth germ, defect of dental follicle, early loss or delayed exfoliation primary canine, space problem, supernumarary teeth, cyst, odontoma, Impaction frequently involves further complication such as root resorption of adjacent teeth, cyst formation and migration of the neighboring teeth. Various treatment modalities include extraction of primary canine, surgical opening and orthodontic traction, autotransplantation, surgical extraction of impacted canine.

• 대한소아치과학회지
• /
• 제42권1호
• /
• pp.53-61
• /
• 2015

소아치과 임상에서 기성금속관 수복은 매우 높은 활용성과 사용빈도에도 불구하고 완벽하고 정밀한 수복이 쉽지 않은 항목으로 판단된다. 불량한 변연 적합, 변연부 치태 침착, 인접 영구치의 맹출 장애, 접착제 소실 및 이차 우식, 부적절한 지대치 삭제, 교합면 천공 등이 임상적으로 흔히 관찰되는 문제점들이다. 본 연구는 기성금속관이 장착된 상태로 발치된 유구치를 대상으로 수복 상태를 평가해 봄으로써, 빈번한 결함과 착오들을 찾아낼 목적으로 시도되었다. 부산대학교 치과병원 소아치과에서 발치된 기성금속관 수복 유구치 97개를 대상으로 육안적 평가와 micro-computed tomography(micro-CT) 영상을 분석하였다. 변연 적합도, 접착제 소실, 이차우식, 교모성 천공, 변연부 연마 결함, 선반(ledge) 형성 등의 항목으로 수복상태를 평가하여, 다음과 같은 결과를 얻었다. 조사항목들을 대상치아 기준으로 보았을 때, 접착제 소실이 가장 빈번하였으며(98%), 뒤를 이어 이차우식(42.3%), 변연부 연마 결함(41.2%), 선반(ledge) 형성(29.9%), 교모성 천공(17.5%)의 순으로 나타났다. 변연 간격이 클수록 접착제 소실이 증가하는 경향을 보였고, 접착재 소실은 변연 간격 및 이차 우식과 유의한 상관성을 보였다. 평균 변연간격은 $0.31{\pm}0.26mm$ 였으며, 상악 제2 유구치에서 가장 크게 나타났다. 변연이 백악법랑경계 상방에 위치하는 경우가 가장 많았고, 변연이 치관 상방에 위치할수록 변연 간격은 작게 나타났다(p < 0.05).

• Archives of Plastic Surgery
• /
• 제33권6호
• /
• pp.748-752
• /
• 2006

Purpose:Circular skin lesions between 10 and 35 mm in diameter generate problems often. Direct closure of the lesion risks excessive wound tension or wound dehiscence. Skin grafts heal slowly and often remain unsightly. Traditional skin flaps have a limited role. We treated this circular medium-sized skin lesion(10 - 35 mm sized) by reducing opposed multilobed(ROM) flap. Methods: ROM flap involves a series of semicircular lobes extending both cephalic and caudal from the defect. Direction of the semicircular multilobed flap is set parallel to relaxed skin tension line(RSTL) to minimize scar formation. First semicircle is drawn 60% in diameter of the defect. Second semicircles are drawn at the cephalic and caudal aspects of the original semicircles. These semicircles are 60% in diameter of the first semicircle. Additional semicircles are repeatedly drawn until the tension of skin flaps becomes free. ROM flap has a length-to-base ratio of 0.5 resulting in lower theoretical risk of end flap necrosis than a random pattern flap with a large ratio. The technique involves lobes most distant from the primary defect being transposed in turn closer to the defect. Results: The ROM flap reduces skin tension concerns, lowers the risk of flap necrosis and allows for quicker and more aesthetic healing. Results were generally good and major complications, such as dehiscence, infection, or delayed healing, did not occur. Conclusion: ROM flap repair allows the plastic surgeon an additional option when faced with a circular medium-sized skin lesion.

• 대한장애인치과학회지
• /
• 제3권1호
• /
• pp.26-30
• /
• 2007

전신적으로 면역이 결핍된 백혈구 접착 결핍증 환아에서는 정기적인 구강 위생 관리는 매우 중요하다. 치면세균막의 제거를 통해 국소적인 자극원을 감소시킴으로써 구강 내 자극에 대한 동통이나 구취 감소가 가능하고 진행되는 치주조직의 파괴 양상을 어느 정도 지연시킬 수 있을 것으로 사료된다. 내원을 통한 관리도 중요하지만 잇솔질 교육을 통하여 환자 스스로 가정에서도 구강 위생 관리를 시행토록 하여야 하며 향후 감염원이 될 수 있는 원인을 감소시키는 노력이 필요하다.

• The Plant Pathology Journal
• /
• 제27권1호
• /
• pp.20-25
• /
• 2011

Gibberella zeae (anamorph: Fusarium graminearum), a homothallic (self-ferile) ascomycete with ubiquitous geographic distribution, causes serious diseases in several cereal crops. Ascospores (sexual spores) produced by this fungal pathogen have been suggested as the main source of primary inoculum in disease development. Here, we report the function of a gene designated GzRUM1, which is essential for ascospore formation in G. zeae. The deduced product of GzRUM1 showed significant similarities to the human retinoblastoma (tumor suppressor) binding protein 2 and a transcriptional repressor, Rum1 in the corn smut fungus (Ustilago maydis). The transcript of GzRUM1 was detected during the both vegetative and sexual stages, but was more highly accumulated during the latter stage. In addition, no GzRUM1 transcript was detected in a G. zeae strain lacking a mating-type gene (MAT1-2), a master regulator for sexual development in G. zeae. Targeted deletion of GzRUM1 caused no dramatic changes in several traits except ascospore formation. The ${\Delta}$GzRUM1 strain produced perithecia (sexual fruit bodies) but not asci nor ascospores within them. This specific defect leading to an arrest in ascospore development suggests that GzRUM1, as Rum1 in U. maydis, functions as a transcriptional regulator during sexual reproduction in G. zeae.