• 한국실내디자인학회논문집
• /
• 제24권6호
• /
• pp.221-228
• /
• 2015

This study aims to define concepts on Hospital Design Focused on System to respond to the development and change by comparing general design methods of the General hospital architecture in Korea and analyze elements suitable to concepts on Hospital Design Focused on System in the General hospital architecture through examining the transformation of General hospitals in Korea. Essential architectural elements composing the Hospital Design Focused on System are as follows. First of all, the elements which can react to development of hospital architecture are HOSPITAL STREET and site situation. Secondly, core, equipment shaft, column, MAIN STREET and air handling unit room are elements of great importance as the location of these elements determines the dimensions and scale of the space which hospital functions are assigned to. Third, the area in regard to the rate of change is formed by MAIN STREET, which is the primary element, and envelope. The depth between MAIN STREET and envelope is defined as space depth. The flexible area is determined depending on this space depth and thus how to set up this flexible area determines the degree of readiness in responding to the change.

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.68-75
• /
• 2018

A flare from an Air Force fighter was abnormally dispensed during the landing. To determine the cause of the abnormal dispensing, fracture analysis, signal analysis and reproduction experiments based on physics of failures were performed. The primary cause of the failure was analyzed to be due to an intermittent fault of an internal circuit card in the AN/ALE-40 chaff/flare dispenser by a broken lid of a capacitor, and the root cause which had derived the primary cause was considered to be an improper handling during the domestic maintenance which were changed from the overseas maintenance due to the DMSMS problem. Therefore, the overall process of the maintenance capability development system was reviewed and alternative ways that considers maintenance error decision aid(MEDA) for system improvement were suggested to prevent further failures.

• 한국연소학회지
• /
• 제18권4호
• /
• pp.1-11
• /
• 2013

The oxy-fuel combustion is $CO_2$ capture technology that uses mixture of pure $O_2$ and recirculated exhaust as oxidizer. Currently some Oxy-fuel power plants demonstration project is underway in worldwide. Meanwhile research project for converting 125 MWe Young-Dong power plant to 100 MWe oxy-fuel power plants is progress. In this paper, 1 D process analytical approach was applied for conducting process design and operating parameters sensitivity analysis for oxy-fuel combustion of Young-Dong power plant. As a result, appropriate gas recirculation rates was 74.3% that in order to maintain normal rating superheater, reheater steam temperature and boiler heat transfer patterns. And boiler efficiency 85.0%, CPU inlet $CO_2$ mole concentration 71.34% was predicted for retrofitted boiler. The oxygen concentration in the secondary recycle gas is predicted as 27.1%. Meanwhile the oxygen concentration 22.4% and moisture concentration 5.3% predicted for primary recycle gas. As the primary and secondary gas recirculation increases, then heat absorption of the reheater is tends to increases whereas superheater side is decreased, and also the efficiency is tends to decrease, according to results of sensitivity analysis for operating parameters. In addition, the ambient air ingression have a tendency to lead to decline of efficiency for boiler as well as decline of $CO_2$ purity of CPU inlet.

• 대한기계학회논문집B
• /
• 제41권1호
• /
• pp.29-36
• /
• 2017

본 논문은 환형노즐 이젝터를 이용하여 세정수 공급과 기포생성을 동시에 할 수 있는 세정기술 개발을 위한 기초연구를 목적으로 한다. 환형노즐 이젝터의 피치변화에 따른 구동 및 부유체의 정량적 유동특성과 세정수조에 분출되는 분류의 정성적 가시화 이미지를 분석하였으며, 세정물의 농약 잔류물 성분의 농도를 검증하였다. 피치가 증가하면 구동유량은 증가하는 반면에, 유량비는 감소하였다. 피치가 증가하면 분류는 부력분류나 평형분류 거동을 나타내며, 잔류농약의 농도는 감소 후 증가하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.668-672
• /
• 2009

This is to report the result of Development of Single effect/Double lift absorption chiller & heater which is used in the district heating net work. The heating cycle was newly developed to make the secondary hot water from evaporator and the cycle change-over function was added for the heating to the cooling mode and the cooling to the heating mode. Finally, it was assured through the site trial operation that the outlet temperature of primary hot water can be produced lower than $68^{\circ}C$ when the outlet temperature of secondary hot water is $60^{\circ}C$.

• Journal of Pharmaceutical Investigation
• /
• 제40권6호
• /
• pp.321-332
• /
• 2010

Growing interest in the nasal route as a drug delivery system calls for a reliable in vitro model which is crucial for efficiently evaluating drug transport through the nasal cells. Various in vitro cell culture systems has thus been developed to displace the ex vivo excised nasal tissue and in vivo animal models. Due to species difference, results from animal studies are not sufficient for estimating the drug absorption kinetics in humans. However, the difficulty in obtaining reliable human tissue source limits the use of primary culture of human nasal epithelial cells. This shortage of human nasal tissue has therefore prompted studies on the "passage" culture of nasal epithelial cells. A serially passaged primary human nasal epithelial cell monolayer system developed by the air-liquid interface (ALI) culture is known to promote the differentiation of cilia and mucin gene and maintain high TEER values. Recent studies on the in vitro nasal cell culture systems for drug transport studies are reviewed in this article.

• Nuclear Engineering and Technology
• /
• 제17권4호
• /
• pp.267-278
• /
• 1985

원자력발전소로부터 배출되는 방사성물질에 의한 피폭선량을 규제하는데 있어 몇 가지 종류들의 방식들이 적용되어 왔다. ICRP에 의해 권고된 일차 선량 당량 제한치가 가장 근본적인 것이다. 일차 제한치가 직접 적용될 수 없을 때 외부 피폭의 경우 선량당량 지표가 내부피폭의 경우 최대허용농도, 연섭취 제한치 흑은 유도대기 농도 및 최대 신체 부하량 등이 이용되어 왔다. 그러나 이 값들은 실제 배출량을 제어하는 견지에서 바로 사용할 수 없어 유도방출 기준치를 구하게 된다. 본 연구에선 월성 원자력발전소에 대해 고려되는 특정환경들 사이의 전달속도가 시간에 독립적인, 장기성 농축인자 방식으로 방출속도의 유도 제한치를 구하였다.

• 한국재료학회지
• /
• 제29권4호
• /
• pp.264-270
• /
• 2019

As a case study on aspect ratio behavior, Kaolin, zeolite, $TiO_2$, pozzolan and diatomaceous earth minerals are investigated using wet milling with 0.3 pai media. The grinding process using small media of 0.3 pai is suitable for current work processing applications. Primary particles with average particle size distribution D50, ${\sim}6{\mu}m$ are shifted to submicron size, D50 ${\sim}0.6{\mu}m$, after grinding. Grinding of particles is characterized by various size parameters such as sphericity as geometric shape, equivalent diameter, and average particle size distribution. Herein, we systematically provide an overview of factors affecting the primary particle size reduction. Energy consumption for grinding is determined using classical grinding laws, including Rittinger's and Kick's laws. Submicron size is obtained at maximum frictional shear stress. Alterations in properties of wettability, heat resistance, thermal conductivity, and adhesion increase with increasing particle surface area. In the comparison of the aspect ratio of the submicron powder, the air heat conductivity and the total heat release amount increase 68 % and 2 times, respectively.

• Wind and Structures
• /
• 제34권4호
• /
• pp.321-334
• /
• 2022

Irregularity in plan shape is very common for any type of building as it enhances better air ventilation for the inhabitants. Systematic opening at the middle of the facades makes the appearance of the building plan as a butterfly one. The primary focus of this study is to forecast the force, moment and torsional coefficient of a butterfly plan shaped tall building. Initially, Computational Fluid Dynamics (CFD) study is done on the building model based on Reynolds averaged Navier Stokes (RANS) k-epsilon turbulence model. Fifty random cases of irregularity and angle of attack (AOA) are selected, and the results from these cases are utilised for developing the surrogate models. Parametric equations are predicted for all these aerodynamic coefficients, and the training of these outcomes are also done for developing Artificial Neural Networks (ANN). After achieving the target acceptance criteria, the observed results are compared with the primary CFD data. Both parametric equations and ANN matched very well with the obtained data. The results are further utilised for discussing the effects of irregularity on the most critical wind condition.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.460-468
• /
• 2021

본 연구는 multi fan 방식의 "공랭식 연소설비"의 공정관리상의 문제점을 single F.D. fan 으로 대체하여 개선시키기 위해 CFD 진행하였고, 연소로 내 유동조건 변화를 분석하여 문제점을 확인하였다. 이를 개선하기 위해 연소공기 주입구조를 변경하였고, 구조 변화에 따른 연소효율 개선을 수치해석으로 평가하였다. 또한 실제 연소설비에 수치해석결과를 반영하여 구조개선을 한 후 개선 전·후의 연소효율을 실험적으로 측정하였다. 먼저 기존 Single F.D fan 이 적용된 연소설비에 대한 수치해석을 통해, 2개의 유로로 공급되는 연소공기가 각 유로의 마찰력 차이와 압력의 변화로 인해 연소로 내에서 공급비율이 불규칙하게 되어 선회방식의 연소조건을 위한 축 형태의 난류형성이 어려움을 확인하였다. 이를 개선하기 위해서 연소로에 주입하는 공기 공급 방식을 두 가지로 나누어 수치해석을 하였다. 첫 번째 방식은 연소공기를 외벽에서 180 ~ 360° 회전 후 예열된 연소공기가 주입되는 구조에 대하여 검토하였고, 두 번째는 연소로 내에는 선회할 수 있는 베인(vane) 구조를 적용하여 연소로 밖에서 1차 열교환 후 연소로 내부에 접선방향으로 연소공기가 주입되는 구조에 대하여 검토하였다. 그 결과, single F.D. fan을 가진 공랭식 연소로에 선회방식으로 공기를 주입할 경우, 연소로 외벽의 냉각과 연소로 내부의 완전혼합 유지를 위해 이중 냉각벽을 가지는 덕트 구조를 적용하는 것이 연소조건을 최적화하는데 바람직한 것으로 나타났으며, 실제 운영중인 설비에 적용하여 개선 전·후의 연소효율을 비교한 결과 연소효율이 개선되는 것을 확인할 수 있었다.