• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제3권5호
• /
• pp.141-150
• /
• 2014

최근, 유비쿼터스 기술의 발전으로 인하여 헬스케어 연구가 활발하게 진행되고 있다. 특히, 헬스케어 서비스 영역은 독거노인 또는 환자를 위해 병원에서 가정으로 변화하고 있다. 홈에서 거주자를 식별하는 기술은 스마트 홈 응용 서비스에 매우 중요하다. 그러나, 기존의 거주자 식별연구들은 여러 문제점을 갖고 있다. 몸에 다양한 센서를 부착해야 하며, 개인 프라이버시와 관련되어 거주자 환경에 적용하는데 문제점들이 따르고 있다. 본 논문에서는 이러한 문제점들을 해결하기 위해 무구속, 무자각을 지향하는 센서들의 사용과 저비용으로 시스템을 구현하기 위한 방법으로써 실내 환경 및 센서의 사용을 제한하였다. 이렇게 제한된 센서들만을 이용하여 거주자를 식별하기 위한 방법으로 개인을 식별할 수 있는 요소들을 추출하고 이러한 요소들을 시스템에 적용하기 위해 가중치를 부여하는 방법을 이용하였다. 그리고 거주자를 식별하고 위치를 추적하기 위한 SABA 메커니즘을 설계하였다. SABA 메커니즘은 각 공간별로 배치된 센서들을 통해 거주자를 식별하고 거주자의 행위에 의해 발생한 이전 이벤트들의 기록들을 활용하여 최종적으로 거주자를 식별하여 개별 거주자의 위치를 추적한다. 그리고 본 위치 추적 시스템의 수행성을 검증하기 위해 구현한 응용에 설계된 메커니즘을 적용하고 시나리오를 통해 위치 추적 시스템의 성능을 검증하였다.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.6-12
• /
• 2008

[ $YBa_2Cu_3O_{7-y}$ ](123) powders were synthesized by the solid state reaction method using two different purity $BaCO_3$ powders (99.75% and 99.7% purity) and $Y_2O_3$ (99.9%) and CuO (99.9%) powders. The effect of $BaCO_3$ purity on the formation of a 123 phase and the superconducting properties were investigated. The mixtures of raw powders were calcined at temperature ranges of $800^{\circ}C-880^{\circ}C$ in air and finally made into a single grain samples by a melt processing with top seeding. It was found that a 123 phase was well formed at temperature above $870^{\circ}C$, but the purity effect on the 123 formation was negligible. The single-grain 123 samples prepared from the different $BaCO_3$ powders showed the same $T_c$ value of 90.5 K and similar $J_c$ values about $10^4\;A/cm^2$ at 0 T and 77 K, and $10^3\;A/cm^2$ at 2 T and 77 K. This result indicates that the low purity, cheap price $BaCO_3$ powder can be used as a raw material for the fabrication of single-grain, high-$J_c$ superconducting levitator.

• 한국항만경제학회지
• /
• 제29권1호
• /
• pp.23-45
• /
• 2013

본 연구에서는 항만의 인센티브에 반응하는 선사들의 물동량조절에 대한 문제점을 밝히고 그 대안을 제시하였다. 실적인센티브: W(총액)${\times}a_i$(각선사물량)/A(총물량)는 항만의 물동량 증가에 크게 영향이 미치지 않았으며, 총액${\times}$각선사당조건수량/조건수량${\times}$해당선사수(數)으로 선사들이 물동량을 유지하면 선사들은 1TEU당 최고액의 실적인센티브를 받을 수 있는 것으로 나타났다. 증가량 인센티브(대상물량 = 당해연도물동량 - 전년도물동량 : 조건만족, 선사별 한도액 or 예산한도액)도 선사들이 인센티브한도액범위로 물동량을 조절하면 증가량인센티브 최고액을 받을 수 있어서 부산항과 광양항의 물동량 인센티브제도에 문제가 있음을 알 수 있다. 또한, 선사들의 총한도액물동량이 부산항의 환적화물량을 초과하므로 환적화물이 감소할 수 도 있으며, 2012년 인센티브지급기준으로 물동량과 인센티브를 예상하면 물동량은 널뛰기식으로 증감이 일어나거나, 일정수준(5,720천TEU)으로 멈추고 매년 약 520억원을 지급해야 할 것으로 예상된다. 증가량인센티브도 물동량증가와는 상관없는 수식이다. 글로벌선사들은 운송비 절감을 위하여 선박을 공동운항하고 있으며, 제휴그룹 내에서 항만 간의 물량조절이 가능하고, 제휴그룹들 전체가 자연스럽게 조정하면 항만은 물동량 증가와 상관없는 인센티브가 지급되게 된다. 따라서, 부산항과 광양항은 실적 증가량인센티브를 폐지하고 선사들이 물량조절을 못하게 우리나라 항만전체의 공통인센티브제도 도입이 필요하며, (전 세계항만 동일) 현재 최적의 인센티브 지급방법은 당해 연도 물량에 1TEU당 단가를 결정하여 지급해야 인센티브로 발생할 수 있는 항만간의 치킨게임을 피할 수 있다. 위에 제시한 지급방법외의 인센티브지급방법에 대하여는 추가적인 연구가 요구된다.

• KDI Journal of Economic Policy
• /
• 제12권1호
• /
• pp.3-29
• /
• 1990

60년대 전반 이후의 수출주도형(輸出主導型) 공업화(工業化)을 통한 고도성장(高度成長)은 국내산업(國內産業) 또는 업종간(業種間) 성장율(成長率)의 차이로 인해서 상당한 산업구조변화(産業構造變化)를 수반했다. 따라서 본 논문에서는 산업연관표체계(産業聯關表體系)를 사용하여 우리나라의 장기적(長期的)인 산업성장(産業成長) 및 구조변화(構造變化)의 요인(要因)을 분석해 보고자 한다. 즉 과거(過去)의 장기적(長期的)인 성장과정(成長過程)에서 국내수요(國內需要), 수출(輸出), 수입대체(輸入代替)와 기술변화(技術變化)는 산업별 생산성장(生産成長)에 각각 얼마만큼 기여(寄與)했나 하는 것을 측정해 보고자 한다. 이러한 측정은 총량적(總量的) 경제수준(經濟水準)뿐만 아니라 세부산업별(細部産業別)로도 이루어질 수 있기 때문에 한국경제(韓國經濟) 전반(全般) 및 공업부문(工業部門)의 세부적(細部的) 변화과정(變化過程)에 관한 풍부한 분석자료(分析資料)를 제공할 것으로 기대한다.

• Journal of Radiation Protection and Research
• /
• 제4권1호
• /
• pp.14-20
• /
• 1979

고(高)에너지 방사선(放射線) 치료(治療)에 있어서 정상조직(正常組織)의 완전차폐(完全遮蔽)를 위하여 $5{\sim}8cm$ 납두께의 부정형(不定形) 차폐(遮蔽)벽돌을 제작(製作)해야하는 난점(難點)이 있었다. 저자(著者)들은 납 30.0%, 주석 11.5% 비스므스 48.5%, 카드미늄 10.0%를 사중(四重) 공정결합(共晶結合)시켜 밀도(密度)가 $9.8g/cm^3$ 용융온도(熔融溫度)가 $68^{\circ}C$인 저용융(低熔融) 차폐물질(遮蔽物質)을 개발(開發)하여 이를 Lead Y라고 명명(名命)하였다. 제작(製作)된 Lead Y Block을 $68^{\circ}C$에서 용융(熔融)시켜 보호(保護)해야할 중요(重要)한 장기(臟器)의 형태(形態)대로 제작(製作)된 styrofoam 음형(陰形)에 부어서 차폐효과(遮蔽效果)가 큰 차폐(遮蔽)벽돌을 쉽고 안전(安全)하게 제작(製作)할 수 있었고 납보다 더 단단하고 재현성(再現性)이 크며 저렴(低廉)한 가격(價格)으로 구입(購入)이 가능(可能)하므로 방사선(放射線) 치료효과(治療效果)에 큰 도움을 줄 수 있었다.

• 대한한의학회지
• /
• 제30권4호
• /
• pp.118-128
• /
• 2009

Objects: This study was conducted to investigate the current educational environment of herbology and to develop a future-oriented curriculum for oriental medicine. The questionnaire used in this research was drawn up based on the current curriculum referring to the current curriculum of herbology and pharmacognosy. Methods: The survey was carried out presenting the questionnaires to a total 12,754 of the students and doctors of oriental medicine through e-mailing five times; of these, 2,074 replied. Results: 1. Among the respondents, about 97% agreed that it was necessary to revise and complement the current curriculum of herbology. 2. The respondents felt that the assigned lecture time of subject was "sufficient" (19%), "insufficient" (39%) and "average" (39%), respectively, and the level of lecture was "insufficient" (37%) or "average" (43%) respectively. According to priority, it showed that the contents which needed complement in lecture were discrimination of medicinal herbs (24%), practical use of action and indications (23%), and correlation with modern disease (21%). In theoretical lectures, 69% of the respondents agreed on the introduction of natural scientific methods 3. In practice, 51% of the respondents replied that the lecture time for practice was insufficient. The contents which needed to be complemented in practice were as follows: audio-visual materials for discrimination of medicinal herbs (22%), concrete exercise for the processing of medicinal herbs (21%), and attempts for the objective discrimination of medicinal herbs using instruments (microscope, analytical instrument, residual pesticide, heavy metal, genetic analysis) (16%). 70% replied that the discrimination of medicinal herbs of high price and rarity was "none or insufficient". 4. 56% replied that it was necessary to introduce and practice physicochemical analysis, and they showed higher requests according to the increase of their educational level. However, 86% replied that they had never experienced concrete attempts for objective discrimination of medicinal herbs, which seemed to indicate that, excepting some schools, practice exercise was rarely performed. Conclusions: According to results, it seems that an urgent review on the current course of herbology and a workshop on the process of experimental practice for professors is needed.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.306-311
• /
• 2013

Purpose: With the ever-rising energy prices, thermal energy heavily consuming facilities of the agricultural sector such as commercialized greenhouses and large-scale Rice Processing Complexes (RPCs) need to cut down their energy cost if they must run profitable businesses continually. One possible way to reduce their energy cost is to utilize combustible agricultural by-products or low-price oil instead of light oil as the fuel for their boiler systems. This study aims to analyze the heavy oil combustion characteristics of a newly developed hot water boiler system that can use both rice husk and heavy oil as its fuel convertibly. Methods: Heavy oil combustion experiments were conducted in this study employing four fuel feed rates (7.6, 8.5, 9.5, 11.4 $l/h$) at a combustion furnace vacuum pressure of 500 Pa and with four combustion furnace vacuum pressures (375, 500, 625, 750 Pa) at fuel feed rates of 9.5 and 11.4 $l/h$. Temperatures at five locations inside the combustion furnace and 20 additional locations throughout the whole hot water boiler system were measured to ascertain the combustion characteristics of the heavy oil. From the temperature measurement data, the thermal efficiency of the system was calculated. Flue gas smoke density and concentrations of air-polluting components in the flue gas were also measured by a gas analyzer. Results: As the fuel feed rate or combustion furnace vacuum pressure increased, the average temperature in the combustion furnace decreased but the thermal efficiency of the system showed no distinctive change. On the other hand, the thermal efficiency of the system was inversely proportionally to the vacuum level in the furnace. For all experimental conditions, the thermal efficiency remained in the range of 80.1-89.6%. The CO concentration in the flue gas was negligibly low. The NO and $SO_2$ concentration as well as the smoke density met the legal requirements. Conclusions: Considering the combustion temperature characteristics, thermal efficiency, and flue gas composition, the optimal combustion condition of the system seemed to be either the fuel feed rate of 9.5 $l/h$ with a combustion furnace vacuum pressure of 375 Pa or a fuel feed rate of 11.4 $l/h$ with a furnace vacuum pressure between 500 Pa and 625 Pa.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제7권6호
• /
• pp.221-228
• /
• 2018

최근 ICT 기반 고부가가치 조선해양 산업 요구의 증가로 조선해양 분야의 소프트웨어 비중과 중요성에 대한 기대가 높아지고 있다. 본 논문에서는 재사용 소프트웨어 컴포넌트 개발을 통해 조선해양 분야 소프트웨어 경쟁력을 향상시키는 것을 목적으로 수행한, 설문조사 기반의 조선해양 소프트웨어 개발 환경 분석 결과를 제시한다. 설문조사는 서로 다른 업체에 종사하는 34명의 조선해양 소프트웨어 개발자들을 대상으로 수행 하였으며, 설문 항목은 소프트웨어 개발 업체의 규모나 개발 제품의 기술 분류와 같이 조사 대상 SW 개발 업체 정보를 파악하기 위한 항목과 소프트웨어 개발이 수행되는 플랫폼, 언어, 배포 형태, 컴포넌트 개발 방해 요인, 개발 프로세스 및 품질관리 도구 사용 여부 등의 소프트웨어 개발과 직접적인 관련이 있는 항목들로 구성하였다. 설문조사 분석 결과에 따르면 개발자들이 개발환경을 선택할 때 가장 큰 영향을 미치는 요소는 이용 가능한 도구의 다양성과 기술지원 여부였으며, 성능, 제품의 가격, 보안이 그 다음 고려사항이었다. 또한 소프트웨어 경쟁력 향상을 위한 한 가지 방법인 재사용 컴포넌트의 개발을 가로막고 있는 주요한 원인은 다양한 플랫폼 지원과 신뢰성 보장의 어려움, 개발 비용과 인력 부족으로 조사되었다. 마지막으로, 개발 프로세스와 품질관리 도구를 전면적으로 사용하여 체계적으로 소프트웨어를 개발하고 있는 개발자의 비율은 전체 조사대상 개발자의 15% 정도에 불과한 것으로 조사되었다. 이러한 사실로부터 현재 조선해양 업체들의 고품질 소프트웨어 개발 능력을 향상시키기 위해서는 해당 업체들에 대한 기술적 제도적 지원이 필요한 상황임을 알 수 있었다.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.589-600
• /
• 2007

Statement of Problem: Titanium has many advantages of high biocompatibility, physical porperties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast surface treatment prior to porcelain application, the researchs are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength between titanium and porcelain when using macro-surface treatment and micro-surface treatment and macro and micro surface treatment. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 7 groups-group P : polished with #1200 grit SiC paper, group SS : sandblasted with $50{\mu}m$ aluminum oxides, group LS : sandblasted with $250{\mu}m$ alumium oxides, group HC : treated with 10% hydrochloric acid, group NF : treated with 17% solution of fluoric acid and nitric acid, group SHC : treated with 10% hydrochloric aicd after sandblsting with $50{\mu}m$ alumium oxides, group SNF treated with 17% solution of fluoric acid and nitric acid. Results : Within the confines of our research, the following results can be deduced. 1. Group SS which was sandblasted with $50{\mu}m$ aluminum oxides showed the highest bond strength of 61.74 MPa and significant differences(P<0.05). The bond strengths with porcelain in groups treated acid etching after sandblasting decreased more preferable than the group treated with sandblasting only. It gives significant differences(P<0.05). 2. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The group treated with hydrochloric acid had the sharp serrated surfaces, the group treated with the solution of fluoric acid and nitric acid had the smooth surfaces, the group with sandblasting and hydrochloric acid had irrigular and porous structure, the group with sandblasting and the solution of fluoric acid and nitric acid had crater-like surfaces. But all of the groups treated with acid etching was not found and undercut. Conclusion: In above results, average surface roughness increase, bond strength also increase, but surface topographs influences more greatly on bond strengths.

• Journal of Ginseng Research
• /
• 제20권4호
• /
• pp.501-519
• /
• 1996

There are two kinds of commercially available ginseng root, red ginseng and white ginseng processed from fresh ginseng root Those ginsengs are primary product from fresh ginseng root and have the characteristic of keeping their original root shape Processed ginseng products are made from either red ginseng or white ginseng by way of complicated process of pulverization. Extraction. Condensation, fettering, sterilization, etc. Among them there are extracts. extract powder, powder, capsules tablets, Candy, drinks, nectar, jelly, gums. chicken soup. tonic. etc. to meet the demand for consumer's pretheronce . The 200 kinds of processed secondary products are approximately produced in the form of 20 kinds of ginseng products by about 60 domestic companies. In spite of about 213.000 million won of domestic market in 1993. it seems like that the ginseng market of the future has not a good prospects The total market sale of white ginseng in Korea has been continuously decreased since 1991 And 963 tons of white ginseng was consumed in domestic market in 1993 The domestic market sales of white ginseng in origina1 root shave. was 90, 000 million won in 1993 and market price of the fine root used as a source of processed products has not been changed in these ten years. The total market sale of red ginseng and its processed products was 58, 000 million won in 1993 9.800 mi11ion won of red ginseng in original root shape and 48.000mi11ion of processed red ginseng product. Ginseng products such as extracts, drinks, teas and tonics etc atre mostly exported to south-east Asia. And the total exports of ginseng pi.oducts (extracts, drinks teas) decreased to 54 million dollars in 1994, compared with 85 million dollars in 1992. Despite of extensive knowledge about ginseng little is still known about the development of new processed ginseng pl.oducts because of "Know-How". Some papars have presented the effects of extracting method(amounts of solvent. time. temperature, equipment. etc.) on the quality and yields of ginseng extr acts. Also. some researchers have carried out a few studies on the poriflcation of the extracts and the amounts of precipitation in the drink at variotas pH during the storage for preventinly drink from precipitation. A fell studies on the preservation of Korean ginseng powder. tea. Extract powder by irradiation and ozone treatment have been reported by some researcher for the improvement hygienic quality of ginseng products There are also some reports about the effects of ginseng components on the acid production by lactic acid bacteria or acetic acid bacteria. and alcohol production by yeast for the development of new ginseng products processed by fermentation. To make ginseng more able to contribute to the health of mankind in the future. consistent and considerable efforts should be focussed on improving the taste of ginseng and developing various new product as a health food or a function food.tion food.