• Korean Journal of Veterinary Service
• /
• v.43 no.3
• /
• pp.167-171
• /
• 2020

The epidemiological investigation of outbreak in korea confirmed that the inflow of avian influenza (AI) is related to the migration of migratory birds. In this study, avian repellents instrument were implemented and developed using the visual effects of lasers in accordance with the situation of small domestic fowl farms, and monitoring cameras were installed around each instrument to investigate the frequency of wild birds appearing and evaluate the performance of the instrument. Observation showed that the appreance ratio was reduced by 95%, and no significant reduction in the intrusion prevention effect by adaptation was observed on all fowl farms. In conclusion, it is expected that the outbreak of wild bird-borne infectious diseases such as avian influenza will be decreased if the device is installed on domestic fowl farms.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.87-90
• /
• 2008

This research is to study and analyze our country's management of disasters, the present condition of cultural heritages bases on the examples of temples, and Japan's safety management prevention of buddhist temple. As a result, this research aims to how to improve the temple fire prevention system. To improve the anti-fire system of temples, it is important to make new laws about fire lose to minimize cultural property lose. Secondly, to protect self-contained type fire alarm device, with aerosol type hand propelled fire extinguishers to prevent fire lose. Lastly, construction work of electric engineer is necessary to prevent temple fire loses.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.182-187
• /
• 2015

In the three-phase power system, when any one-phase or two-phases is open-phase, the unbalanced current flows and the single-phase power supplies to three-phase loads. Specially, motor coil and transformer coil receive over-current. As a result, great damage as well as electrical fire can occur to the power system. In order to improve these problems, this paper proposes that an open-phase detection device is designed by a new algorithm using electric potential difference between the resultant voltage of neutral point and ground, and a control circuit topology of open-phase protector is composed of highly efficient semiconductor devices. It improves response speed and reliability. The control algorithm circuit also operates the cut-off of a conventional residual current protective device (RCD) which flows an enforced leakage current to ground wire at open-phase accident. Furthermore, time delay circuit is added to prevent the incapable operation of open-phase protector about instantaneous open-phase not open-phase fault. The time delay circuit improves more reliability.

• Steel and Composite Structures
• /
• v.44 no.4
• /
• pp.569-586
• /
• 2022

This study introduces a novel friction damper as a component of a recentering frame connection, to solve the problem of structural repair costs, caused by stiffness deterioration and brittle fracture of the central brace frame (CBF). The proposed damper consists of shape memory alloy (SMA) bars with pretension applied to them to improve the stability. SMAs reduce the residual displacement by virtue of the properties of the materials themselves; in addition, a pretension can be applied to partially improve their energy dissipation capacity. The damper also consists of a friction device equipped with friction bolts for increased energy dissipation. Therefore, a study was conducted on the effects of the friction device as well as the pretension forces on the friction damper. For performance verification, 12 cases were studied and analyzed using ABAQUS program. In addition, the friction and pretension forces were used as variables in each case, and the results were compared. As a result, when the pretension and friction force are increased, the energy dissipation capacity gradually increases by up to about 94% and the recentering capacity decreases by up to about 55%. Therefore, it has been shown that SMA bars with adequate pretension in combination with bolts with adequate frictional force effectively reduce residual deformation and increase damper capacity. Thus, this study has successfully proposed a novel friction damper with excellent performance in terms of recentering and energy dissipation capacity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.71-77
• /
• 2024

The increasing use of smart devices in South Korea has led to a rise in patients with spinal disorders. This study aims to develop an Android application with exercise prompts to prevent spinal disorders, enhance the usability of healthcare applications, and utilize Android's overlay technology to encourage physical activity. Considering South Korea's total population, it is estimated that around one million individuals may suffer from spinal disorders due to smart device usage. Emphasizing the importance of maintaining proper posture and regular exercise habits, this research highlights the need for innovative application development to assist users in preventing musculoskeletal disorders caused by smart device usage.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.43-48
• /
• 2020

The purpose of this study is to develop an earth leakage alarm circuit breaker, equipped with a leakage alarming function (JER-E2S, ETECKOREA Co., Korea), and to analyze its characteristics. The developed mechanism is exclusively used for single-phase and 220 V circuits, with a rated current of 32 A, 20 A, 20 A (for restrooms), 16 A, etc. It satisfies all characteristics of existing earth leakage circuit breakers (ELB). If a fire current, which is a resistive leakage current (Igr), flows through an electric line, the device detects the leakage current in real time and warns against the leakage through a blinking LED lamp. Since the developed device displays a tolerance to a capacitative leakage current (Igc) that inevitably occurs in LED lamps, communication devices, etc., it ensures a stable power supply. In addition, the earth leakage alarm circuit breaker protects against power failure due to a momentary ground fault. Therefore, it can supply power without the risk of the circuit breaker malfunctioning due to a momentary ground fault caused by water droplets, leaves, etc. Moreover, with a standby power of less than 0.1 W, the developed earth leakage alarm circuit breaker exhibits a power saving performance that is 3~8 times greater than that of other ELBs. Installation of approximately 10 earth leakage alarm circuit breakers in one apartment household, with an area of 120 ㎡, can save 2~5 kWh per month. Therefore, the developed earth leakage alarm breaker not only satisfies the characteristics of existing earth leakage breakers, but also exhibits outstanding power supply quality since it has the functions of electric fire prevention and malfunction prevention. Therefore, this device can innovatively contribute to electric fire prevention.

• Journal of Internet Computing and Services
• /
• v.15 no.6
• /
• pp.27-34
• /
• 2014

Todays, the rapid technical progress of smart device has been used for various social (wall-fare) services in our lives. Especially, most of these services are based on the Local-based Services (LBS) and this technology is getting popular more and more compared with before. Basically, LBS is able to support various types of geographical services such as vehicles' navigation services, Augmented reality services as using extensional local information such as GPS. However, LBS has serious mathematical vulnerability on the services frequently because of its miscalculated GPS data under interior and ambiguous geographical environment such like shadowed area. So, to overcome this limitation, iBeacon, which would be able to mitigate LBS miscalculation process, has been proposed recently among network experts. Compared with other wireless technologies, iBeacon is able to determine the accurate geographical data of certain local positions easily because it is not only designed based on low-powered data transmitting technology, but also, it can be much easy to be deployed. As users' dependency of smart devices are getting higher and higher and the use of smart device is also getting complex more and more, the users prefer to use various types of smart devices at one time. Therefore, in this paper, we propose the loss prevention system that is able to interwork smart devices networks as using iBeacon technology for users' better conveniences.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.11
• /
• pp.1330-1338
• /
• 2011

Social activities of the elderly have been increasing as our society progresses toward an aging society. As their activities increase, so does the occurrence of falls that could lead to fractures. Falls are serious health hazards to the elderly. Therefore, development of a device that can detect fall accidents and prevent fracture is essential. In this study, we developed a portable fall detection system for the fracture prevention system of the elderly. The device is intended to detect a fall and activate a second device such as an air bag deployment system that can prevent fracture. The fall detection device contains a 3-axis acceleration sensor and two 2-axis tilt sensors. We measured acceleration and tilt angle of body during fall and activities of daily(ADL) living using the fall detection device that is attached on the subjects'. Moving mattress which is actuated by a pneumatic system was used in fall experiments and it could provide forced falls. Sensor data during fall and ADL were sent to computer and filtered with low-pass filter. The developed fall detection device was successful in detecting a fall about 0.1 second before a severe impact to occur and detecting the direction of the fall to provide enough time and information for the fracture preventive device to be activated. The fall detection device was also able to differentiate fall from ADL such as walking, sitting down, standing up, lying down, and running.

• Journal of Information Technology Applications and Management
• /
• v.11 no.2
• /
• pp.179-190
• /
• 2004

This paper describes the design of hacking prevention systems using a smart card. It consists of two parts, i.e., PC authentication and Keyboard-buffer hacking prevention. PC authentication function is a procedure to handle the access control to the target PC. The card's serial number is used for PIN(Personal Identification Number) and is converted into hash-code by SHA-1 hash-function to verify the valid users. The Keyboard-buffer hacking prevention function converts the scan codes into the encoded forms using RSA algorithm on the Java Card, and puts them into the keyboard-buffer to protect from illegal hacking. The encoded information in the buffer is again decoded by the RSA algorithm and displayed on the screen. in this paper, we use RSA_PKCS#1 algorithm for encoding and decoding. The reason using RSA technique instead of DES or Triple-DES is for the expansion to multi-functions in the future on PKI. Moreover, in the ubiquitous computing environment, this smart card security system can be used to protect the private information from the illegal attack in any computing device anywhere. Therefore, our security system can protect PC user's information more efficiently and guarantee a legal PC access authority against any illegal attack in a very convenient way.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.77-82
• /
• 2011

In the industrial site of 21st century, there are many and various powders of material, product and fuel of coal, chemical, detergent, paint, feed and more. Therefore, there always is a possible danger of dust explosion in each and every procedure and actually, there are increasing frequency of dust explosion as the use of dust and its amount increases in processes. Therefore, if we leave the current status like now, the unexpected massive dust explosion and its risk cannot be effectively prevented so there has to be effective application of understanding and development of explosion-prevention technology about dust explosion. Therefore, this research set the limit of research to systematically arrange the research results about dust explosion phenomenon and its prevention up to date and has its purpose to theoretically establish the prevention technology about dust explosion based on these theories.