• Title/Summary/Keyword: Prevention Device

Search Result 475, Processing Time 0.027 seconds

A Study on the Hydraulic Fall Prevention Device (유압식 추락 방지장치에 관한 연구)

  • Choi, Jung-Hun;Koo, Jae-Mean;Seok, Chang-Sung;Huh, Yong;Chang, Sung-Yong
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.27 no.11
    • /
    • pp.78-83
    • /
    • 2010
  • Since a tower crane is too high for a worker to ascend and by the wind in the high altitude, the possibility of a safety accident is very high, a lift assist is used. In this study, the hydraulic fall prevention device using the pressure generation device by Seok, et al. was developed. For this, the effects on the fall prevention performances of factors such as gear clearance, oil viscosity, rotative velocity and so on were evaluated by the analysis of fluid flow using FEM and the prototype was producted and a function test was performed.

Theft Prevention Technology for Smart Stroller using Distance Measurement of Dual Beacon (듀얼 비콘의 거리측정을 활용한 스마트 유모차용 도난방지 기법)

  • Chung, Myoungbeom
    • Journal of Internet Computing and Services
    • /
    • v.21 no.6
    • /
    • pp.71-79
    • /
    • 2020
  • In this paper, we propose a theft prevention technology based on beacon and smart device for smart stroller. The smart stroller has two Bluetooth devices. One is for data transmission and the other is for distance measurement as beacon. Thus, smart device uses a Bluetooth for strength level setting, manual locking and data transmission of smart stroller. Furthermore, smart device can do automatic locking of smart stroller using Bluetooth beacon when the stroller go further away from smart device. At this time, we apply a distance measurement algorithm and theft prevention algorithm with improved beacon distance measurement technique. To show usefulness of the proposed technology, we make a smart stroller and developed a smart device application. We did two distance measurement experiments and a theft prevention experiment with the proposed technology and the result shows 91.3% accuracy for theft prevention. Therefore, the proposed technology would be more usefulness technology for smart stroller.

The Design and Implementation of Dog Loss Prevention Device Combining Wireless Communication and GPS Technology

  • Kwak, Ho-Young;Chang, Jin-Wook;Huh, Jisoon
    • Journal of the Korea Society of Computer and Information
    • /
    • v.24 no.2
    • /
    • pp.103-109
    • /
    • 2019
  • Recently, as the number of families raising dogs has increased, cases of lost dogs have frequently occurred. According to US statistics, 5% of the total dogs are reported to be alive, with only 18% reporting to their owners. Therefore, a device for preventing the loss of dogs is needed, and the demand for the market is rapidly growing. Therefore, it is necessary to develop a lost device for dogs. In this paper, we developed a loss prevention device that combines low-power broadband wireless communication technology, LoRa communication method, and GPS positioning technology. The result of this study is expected to prevent the loss of dogs. It is also expected that social problems will reduce the problem of lost dogs.

A Study on the Development of a Low-cost Device for Measuring the Optical Smoke Density (광학적 연기밀도 측정을 위한 저가형 장치의 개발에 관한 연구)

  • Kim, Bong-Jun;Cho, Jae-Ho;Hwang, Cheol-Hong;Park, Seul-Hyun
    • Fire Science and Engineering
    • /
    • v.29 no.4
    • /
    • pp.81-88
    • /
    • 2015
  • A low-cost device using the light-extinction method was developed to measure the optical smoke density in various fire experiments in the present study. The relative measurement accuracy of low-cost device was evaluated through the comparison of optical density measured by a high-cost standard device consisting of He-Ne laser, photo detector and various optical components. The low-cost device was composed of laser module, photocell and acrylic board. From the experiments using a smoke generator can be easily adjusted the smoke concentration, it was found that the low-cost device could measure the smoke density within the range of ${\pm}10%$, compared to the standard device. In addition, the reliability of low-cost device was also confirmed in the experiment using a polyethylene flame. Finally, it is expected that the low-cost device developed with real-time measurement and simple installation for measuring the smoke density will be used instead of the high-cost standard device.

Effect of the limiting-device type on the dynamic responses of sliding isolation in a CRLSS

  • Cheng, Xuansheng;Jing, Wei;Li, Xinlei;Lu, Changde
    • Earthquakes and Structures
    • /
    • v.15 no.2
    • /
    • pp.133-144
    • /
    • 2018
  • To study the effectiveness of sliding isolation in a CRLSS (concrete rectangular liquid-storage structure) and develop a reasonable limiting-device method, dynamic responses of non-isolation, sliding isolation with spring limiting-devices and sliding isolation with steel bar limiting-devices are comparatively studied by shaking table test. The seismic response reduction advantage of sliding isolation for concrete liquid-storage structures is discussed, and the effect of the limiting-device type on system dynamic responses is analyzed. The results show that the dynamic responses of sliding isolation CRLSS with steel bar-limiting devices are significantly smaller than that of sliding isolation CRLSS with spring-limiting devices. The structure acceleration and liquid sloshing wave height are greatly influenced by spring-limiting devices. The acceleration of the structure in this case is close to or greater than that of a non-isolated structure. Liquid sloshing shows stronger nonlinear characteristics. On the other hand, sliding isolation with steel bar-limiting devices has a good control effect on the structural dynamic response and the liquid sloshing height simultaneously. Thus, a limiting device is an important factor affecting the seismic response reduction effect of sliding isolation. To take full advantage of sliding isolation in a concrete liquid-storage structure, a reasonable design of the limiting device is particularly important.

First Trial of Cervical Cytology in Healthy Women of Urban Laos using by Self-sampling Instrument

  • Nabandith, Viengvansay;Pholsena, Vatsana;Mounthisone, Phouthasone;Shimoe, Kyoko;Kato, Saiko;Aoki, Kunio;Noda, Sadamu;Takamatsu, Reika;Saio, Masanao;Yoshimi, Naoki
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.13 no.9
    • /
    • pp.4665-4667
    • /
    • 2012
  • Cervical cancer is the most common cancer in Laos women and a screening programme, even with the PAP smear test (PAP test), has yet to be established for routine use. The Pap test is accepted as the most appropriate for cervical cancer screening in some settings but it is not commonly available in Laos hospitals, because there are few cytopathologists and gynecologists have little experience. As a pilot program, seminars for the PAP test were given in 2007 and 2008, and then PAP tests were carried out using self-sampling instrument (Kato's device) with 200 healthy volunteers in Setthathirath hospital, Laos, in 2008. The actual examination number was 196, divided into class I 104 (53.1%), class II 85 (43.3%), class IIIa 4 (2.0%), class IIIb 1 (0.5%), and class V 1 (0.5%) by modified Papanicolau classification. Four cases had menstruation. There were 6 cases with epithelial cell abnormalities including malignancy. There were 7 cases with fungus and 2 cases with trichomonas in Class II. More than 70% volunteers felt comfortable with the Kato's device and wanted to use it next time, because of the avoidance of the embarrassment and a low cost as compared with pelvic examination by gynecologists. This first trial for PAP test for healthy Laos women related to a hospital found three percent to have abnormal cervical epithelial cells. Therefore, this appraoch using a self-sampling device suggests that it should be planned for cervical cancer prevention in Laos.

Investigation of Frost Reduction Effect using Mesh Net (그물망을 이용한 서리 저감 효과 구명)

  • Yu, Seok cheol;Kim, Yu yong;Lim, Seong yoon;Song, Ho sung
    • Journal of Bio-Environment Control
    • /
    • v.29 no.4
    • /
    • pp.448-455
    • /
    • 2020
  • This study was carried out to investigate reduction of the frost damage using the mesh net used for the purpose of non-bagged cultivation. A device measuring the weight of frost was developed and installed in both the control and the experimental, and the effect of frost reduction was evaluated with their weights. As a result, weight of frost in the control was reduced from 37% to 59% with mesh net on the day the frost was observed. In addition, the device for automatically observing the amount of frost was developed and the height of the windbreak of the frost measuring device was determined to be 30 cm through wind tunnel experiment. The results of this study are expected to reduce frost damage during the flowering season of fruit trees by installing mesh net and it is expected to be used as basic data for agricultural use of mesh net.

A case study on the prevention and occurrence of fault in Transmission & Substation (변전설비의 보수 정비 사례 및 고장 실태 조사 연구)

  • Lee, Seog-Kyu;Park, Hee-Woo;Kim, In-Kun;Lee, Jong-Hak;Lee, Man-Seon
    • Proceedings of the KIEE Conference
    • /
    • 1999.11b
    • /
    • pp.83-85
    • /
    • 1999
  • Recently, a rapid increase of electricity demands have made Transmission & Substation device large-sized. complicated and diverse. Moreover, a rising level of customer's requirement and high growth of industry increase the reliability of electricity service. Therefore on the basis of the case study on the occurrence of fault, the prevention of defects for each device and the analyzing of the outbreak and prevention of systematic breakdown in Sin-Incheon Power Transmission Branch Office, this paper presents some important matters and suggests the method of improvement in design, construction, maintenance, and repairing the Transmission & Substation device.

  • PDF

The Design of IoT Device System for Disaster Prevention using Sound Source Detection and Location Estimation Algorithm (음원탐지 및 위치 추정 알고리즘을 이용한 방재용 IoT 디바이스 시스템 설계)

  • Ghil, Min-Sik;Kwak, Dong-Kurl
    • Journal of Convergence for Information Technology
    • /
    • v.10 no.8
    • /
    • pp.53-59
    • /
    • 2020
  • This paper relates to an IoT device system that detects sound source and estimates the sound source location. More specifically, it is a system using a sound source direction detection device that can accurately detect the direction of a sound source by analyzing the difference of arrival time of a sound source signal collected from microphone sensors, and track the generation direction of a sound source using an IoT sensor. As a result of a performance test by generating a sound source, it was confirmed that it operates very accurately within 140dB of the acoustic detection area, within 1 second of response time, and within 1° of directional angle resolution. In the future, based on this design plan, we plan to commercialize it by improving the reliability by reflecting the artificial intelligence algorithm through big data analysis.