• Journal of Acupuncture Research
• /
• v.25 no.4
• /
• pp.117-125
• /
• 2008

Objectives : Analyze according to types of event causing the adverse outcome due to acupotomy, and discuss problems and safety reqirements to using this therapy in Korea. Methods : Based upon the indication, contraindication, treatment procedures, clinical obsevations, acupotomy-related adverse outcome case reports, the factors of damaging event were classified. Results : The main factors of adverse outcome by acupotomy were anatomical ignorance, contamination of device or hospital staff, failure to notice preexisting disease(cardiovascular disease, hypertension, renal failure, hemophilia, chronic Liver Disease, etc.), unskilled treatment procedures(massive bleeding) and techniques(nerve injury, hepatic and splenic injury, Pneumothorax). Conclusions : It is mandatory to prepare adequate sterilie aseptic technique. The clinician should ensure understand genernal health state of patient and anatomical direction.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.135-144
• /
• 1999

The purposes of this study were to survey types of pretreatment methods adopted by industrial hygiene laboratories in Korea for extracting heavy metals in welding fume samples and to compare performances of two pretreatment methods, the acid extraction and the microwave digestion, in extracting heavy metals contained in the real workplace samples from various welding jobs including arc, argon, and carbon dioxide. A total of 25 analytical chemists in the industrial hygiene laboratories participating the quality control program directed by the Korea Industrial Safety Corporation were interviewed by telephone. For the purpose of comparing performance of extracting heavy metals from real workplace samples, a total of 53 welders from 21 workplaces located in Anyang, Uiwang, and Kunpo areas were sampled from the period of March 22, 1999 to April 20, 1999. It was found that the most frequently adopted method for samples from the quality control program was the acid extraction method(40%) followed by the NIOSH 7300 method(36%). The NIOSH method, however, was the dominant method(36%) for samples from workplace followed by the acid extraction method(28%). In this study, two extraction methods, the acid extraction and the microwave digestion, were compared in terms of recovery rate, accuracy, and precision for both manganese and chromium. Both methods produced comparable results for the samples prepared for the quality control program. In contrast, concentrations of two heavy metals determined from real workplace samples pretreated with the microwave digestion method were statis tically significantly higher, manganese(166%) and chromium (200%), than those of utilizing the acid extraction method. These findings were consistent regardless of types of welding techniques used. The results of this study clearly show the importance of verifying the analytical performances of extraction methods for heavy metals not only for the samples from the quality control program but also from the real world samples collected from welding jobs.

• Clinical and Experimental Reproductive Medicine
• /
• v.43 no.4
• /
• pp.228-232
• /
• 2016

Objective: The aim of this study was to investigate the impact of pretreatment with transdermal estradiol ($E_2$) compared to oral contraceptive pills (OCPs) on controlled ovarian stimulation (COS) response in normal responders undergoing fresh in vitro fertilization (IVF)-embryo transfer (ET) cycles. Methods: A retrospective cohort study was performed of normal responders undergoing fresh IVF-ET cycles who received pretreatment with transdermal $E_2$ versus OCPs prior to fresh IVF-ET. The total days of ovarian stimulation, total dosage of gonadotropins, total number of oocytes, and mature oocytes retrieved were noted. Pregnancy outcomes after ET were also recorded. Results: A total of 2,092 patients met the inclusion criteria: 1,057 and 1,035 patients in the transdermal $E_2$ and OCP groups, respectively. Patients in the OCP group had a longer duration of COS ($10.7{\pm}1.63days$, p< 0.01) than the $E_2$ group ($9.92{\pm}1.94days$). Patients in the OCP group also required higher cumulative doses of gonadotropins ($2,657.3{\pm}1,187.9IU$) than those in the $E_2$ group ($2,550.1{\pm}1,270.2IU$, p= 0.002). No statistically significant differences were found in the total and mature oocytes retrieved or in the rates of biochemical pregnancy, clinical pregnancy, spontaneous miscarriage, and live birth between the groups. Conclusion: Our findings suggest that compared to OCPs, pretreatment with transdermal $E_2$ is associated with a shorter duration of ovarian stimulation and lower gonadotropin utilization, without compromising the oocyte yield or pregnancy outcomes in normal-responder patients undergoing fresh IVF.

• Korean Journal of Agricultural Science
• /
• v.26 no.1
• /
• pp.21-30
• /
• 1999

To increase the strength properties of recycled fiber, especially OCC (Old Corrugated Container) in this study, we used the mechanical pretreatment on the fibers before refining. The mechanical action in the Hobart mixer induced high shear and compression on the fibers, which resulted in the breakdowns of fiber internal structure, and microcompressions on the surface of the fibers. We evaluated the degree of mechanical treatment by fiber curl index. Four different refining techniques were applied to the pretreated fibers (Valley beater, Kady mill, PFI mill, and Impact refining) to find the best combination of the pretreatment and the refining methods. Conclusions were summarized as followed. 1. In keeping the fiber length from shortening, Kady mill and PFI mill refining were effective. Kady mill and Valley beater application tended to straighten out the fiber shapes. 2. Valley beating increased the breaking length of the handsheets better than other methods, while lowering the tear strength most. The mechanical pretreatment increased breaking length about 10% in average irrespective of four different refining methods. 3. Tear strength was increased by the mechanical pretreatment and by the PFI mill refining. 4. Burst strength was increased by the mechanical pretreatment and by valley beating method. 5. In increasing the breaking length and burst strength while keeping tear strength, combination of mechanical pretreatment and Valley beating were most effective.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04a
• /
• pp.87-109
• /
• 1997

Reverse osmosis(R/O), ultrafiltration(UF) and microfiltration (MF) processes are widely used for water treatment. In the seminar, characteristics of typical membrane modules including tubular, hollow fiber, plate and frame and spiral wound types will be discussed in detail. The design methods based on hydrodynamics for hollow fiber and spiral wound modules will be introduced analytically. Concentration polarization (CP) and membrane fouling mechnism as well as the techniques for CP reduction will be handled. The CP control techniques contain chemically modified membrane surface, pretreatment of feed water, operation of low trans-membrane pressure, chemical or physical cleaning methods and artificial production of various fluid turbulences near the membrane surface, etc. In especially, the recent commercial membrane modules for CP control including module rotation, vibration and Taylor or Dean vortex system will be introduced and discussed in detail.

• Journal of the Korean Chemical Society
• /
• v.64 no.3
• /
• pp.153-158
• /
• 2020

With the recent popularity of mobile devices, the demand for lithium-ion batteries is increasing. In this study, the surface treatment process for the development of the Al (aluminum) lead tab for positive electrode, a key component of the pouch-type lithium-ion battery, was investigated. Anodizing and sealing processes were tested as surface treatment techniques. It was found that only a sealing process is needed to obtain sufficient adhesive strength. In the present study, an adhesive strength of 17 N/12 mm was achieved by degreasing and etching pretreatment, followed by a sealing process of 10 min duration. This adhesive strength was greater than that achievable using Cr (chromium) surface treatment. Using various surface analysis techniques, the shape and composition of the surface before and after being subjected to the surface treatment were compared and analyzed. The results of this study are expected to contribute to the development of an eco-friendly lead tab.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.509-525
• /
• 2023

This study has delved into the evolution of Hanji-manufacturing molds and techniques from ancient times to the present, aiming to uncover the current state of traditional Hanji-making techniques. In the absence of records on Hanji-making, various ancient documents, rare books, and documents during the Japanese occupation period, among other artifacts and relics, were analyzed in this study. It was discovered that a sudden significant transformation occurred in the Hanji field during the Japanese occupation period. Soda ash and caustic soda were commonly used for the pretreatment of White bark. Furthermore, a chemical bleaching powder was introduced for the pretreated White bark. Additionally, manual beating of the bark was replaced by mechanical beating methods. While these changes brought convenience to papermakers, they also resulted in a deterioration of Hanji quality. Furthermore, it was revealed that the term "Hanji" has been in use since at least 1908. Furthermore, this study clarified that Heulimtteugi is not the only traditional Hanji-making method in Korea. Instead, there existed Korea's own traditional Gadoomtteugi method, at least up to the 1930s, before the Japanese-style Gadoomtteugi became common in Korea. Additionally, for the first time, this study raises the possibility of the adoption of mold-hanging techniques into Korea's Heulimtteugi method from foreign sources.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.67-72
• /
• 1999

Optimal pretreatment processes for metal plating on engineering plastics, especially on Nylon-inorganic filler alloy was studied. For Nylon-inorganic filler alloy, adhesion strength between resin surface and metal could be improved by just etching process that eliminate amorphous layer. In the SEM picture and surface roughness measurement, etching treatment was found to make enabled the surface condition very rough and the adhesion strength good. It was also found that the surface condition of plated article and its adhesion strength partly depended upon molding condition of Nylon-inorganic filler alloy. EDS, peaks showed that what kinds of and how much of the metal elements remained on the resin surface after pretreatment processes. Cr did not affect on adsorption of Sn and Pd remarkably.

• Biomedical Science Letters
• /
• v.8 no.3
• /
• pp.161-165
• /
• 2002

Apoptosis can be difficult to detect in routine histological sections. Since extensive DNA fragmentation is an important characteristic of this process, visualization of DNA breaks could greatly facilitate the identification of apoptotic cells. Several techniques for the qualitative and quantitative detection of this process have been established; recently, an in situ nick end-labelling technique based on the detection of DNA fragmentation, which is a molecular characteristic of apoptotic cell death, was described. Applying this method to paraffin sections of rat tissues, sensitivity was observed to be inconsistently low with regard to the expected number of apoptotic cells. I describe a new modified method for formalin-fixed, paraffin-embedded tissue sections, pretense pretreatment to permeate the tissue sections that involves an TUNEL (terminal deoxynucleotidyl transferase-mediated dUTP nick end-labeling) is acknowledged as a method of choice in the rapid identification and quantification of the apoptotic cell fraction in paraffin tissue preparations. TUNEL was performed without apoptosis and with apopotosis samples to each of the three concentrations of proteinase K (10, 25, 40 mg/ml) pretreatments. In this study, I show that chemical pretreatments of the tissue sections in proteinase K (25 mg/ml for 15 min at room temperature) considerably enhances the sensitivity of this nick end labelling technique.

• Biomolecules & Therapeutics
• /
• v.25 no.5
• /
• pp.497-503
• /
• 2017

Recent reports claimed that glucosylsphingosine (GS) is highly accumulated and specifically evoking itch-scratch responses in the skins of atopic dermatitis (AD) patients. However, it was unclear how GS can trigger itch-scratch responses, since there were no known molecular singling pathways revealed yet. In the present study, it was verified for the first time that GS can activate mouse serotonin receptor 2a (mHtr2a) and 2b (mHtr2b), but not 2c (mHtr2c) that are expressed in HEK293T cells. Specifically, effects of GS on all mouse serotonin receptor 2 subfamily were evaluated by calcium imaging techniques. The GS-induced intracellular calcium increase was dose-dependent, and antagonists such as ketanserin (Htr2a antagonist) and RS-127445 (Htr2b antagonist) significantly blocked the GS-induced responses. Moreover, the proposed GS-induced responses appear to be mediated by phospholipase C (PLC), since pretreatment of a PLC inhibitor U-73122 abolished the GS-induced responses. Additionally, the GS-induced calcium influx is probably mediated by endogenous TRPC ion channels in HEK293T cells, since pretreatment of SKF-96365, an inhibitor for TRPC, significantly suppressed GS-induced response. In conclusion, the present study revealed for the first time that GS can stimulate mHtr2a and mHtr2b to induce calcium influx, by utilizing PLC-dependent pathway afterwards. Considering that GS is regarded as a pruritogen in AD, the present study implicates a novel GS-induced itch signaling pathway.