• KSBB Journal
• /
• 제29권1호
• /
• pp.22-28
• /
• 2014

In this study, we investigate the effect of pretreatment method on lipid extraction from Enteromorpha intestinalis using physical, thermo-chemical, and enzymatic process such as ultrasonication, high temperature treatment, freezing, microwave irradiation, osmotic shock, pH shock, homogenizing, and enzymatic treatment. In pretreatment with separated lipid extraction, the high extraction yield was obtained by high temperature treatment ($121^{\circ}C$ for 5 min) with 0.1 N HCl, which is 1.4 times higher than that of control. In pretreatment with direct lipid extraction, the high extraction yields were obtained by 0.1 N HCl pretreatment, microwave irradiation (700W, 1 min with twice), and 10% NaCl pretreatment, which is 1.45 times higher than that of control. In the result of enzymatic pretreatment with 17 kinds of enzymes, Cellic CTec II showed the high extraction yield of 5.3%, and which is 1.9 times higher than that of control. Moreover, the extraction yield was increased by the increase of enzyme amounts. In 10% enzyme amount, about 5.8% yield was obtained.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.52-61
• /
• 2009

본 연구의 목적은 기존 전처리 방법과 본 연구에서 도출한 표면처리 방법으로 전처리한 전기로슬래그의 물성을 분석하고 전처리 방법을 달리한 각각의 전기로슬래그의 대체율을 변화시켜 제작한 콘크리트의 특성을 비교 고찰하여 산업부산물인 전기로슬래그를 콘크리트용 굵은골재의 대체재로 활용하는데 있다. 한편, 표면처리 방법은 무기계의 실리카 용액을 사용하여 1일 함침 후 6시간 자연 건조하는 방법을 이용하였는데, 결과로부터, 기존의 온수처리방법에 비해 본 연구에서 사용한 표면처리방법이 더욱 효과적이었으며, 표면처리방법이 전기로슬래그의 팽창성 감소와 콘크리트용 굵은 골재로 활용하는데 효과적이라고 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.78-90
• /
• 2012

Soybean hull is an attractive feedstock for glucose production. To increase the glucose conversion in acid hydrolysis, a pretreatment method combined steam explosion with alkali pretreatment for soybean hull was studied. For first step pretreatment, steam explosion conditions (log Ro 2.45) were optimized to obtain maximum solid recovery and cellulose content. In the second step pretreatment, the conditions for potassium hydroxide pretreatment of steam exploded soybean hull were optimized by using RSM (response surface methodology). The optimum conditions for minimum lignin content were determined to be 0.6% potassium hydroxide concentration, $70^{\circ}C$ reaction temperature and 198 min reaction time. The predicted lignin content was 2.2% at the optimum conditions. Experimental verification of the optimum conditions gave the lignin content in similar value with the estimated value of the model. Finally, glucose conversion of pretreated soybean hull using acid hydrolysis resulted in $97.1{\pm}0.4%$. This research of two-step pretreatment was a promising method for increasing the glucose conversion in the cellulose-to-glucose process.

• KSBB Journal
• /
• 제16권5호
• /
• pp.446-451
• /
• 2001

신문지와 같은 폐지지 적합한 전처리 방법을 조사하였다. 조사방법은 전처리 후 기질의 효소 가수분해에 영향을 미칠수 있는 인자, 즉 회분의 양, 기질 크기의 잉크의 유무에 따른 효소 당화율을 측정하였다. 이 세 인자 중 잉크가 효소당화율에 미치는 영향이 가장 커서 잉크를 제거하는 방향으로 전처리 방법을 고안하였다. 먼저 섬유성 기질에서 성능이 입증된 percolation반응기에 의한 전처리 방법을 사용하였다. 그러나 17$0^{\circ}C$에서 전처리된 기질은 잉크가 거의 제거되지 않앗고 효소 당화율도 전처리하지 않은 기질보다 더 낮았다. 그래서 10$0^{\circ}C$이하의 낮은 온도에서 회분식 반응기를 사용하는 방법을 연구했는데 암모니아에 과산화수소를 첨가하여 진탕교반시키는 방법이 가장 효과적이었다. 이 방법의 효소 당화율은 전처리하지 않은 기질보다 약 20% 증가한 85%이어서 신문지와 같은 폐지의 전처리에 아주 효과적이었음을 알수 있었다. 이와 같은 높은 당화율은 암모니아에 첨가한 과산화수소가 잉크제거와 기질을 팽윤시키는 작용을 하기 때문이라고 생각된다.

• Journal of Pharmaceutical Investigation
• /
• 제35권2호
• /
• pp.81-87
• /
• 2005

We have prepared karaya gum patches containing ketoprofen and investigated the effect of short-time current pretreatment of skin on the permeability. Hairless mouse skin was treated with current before the patch was mounted on the skin. The effect of current density and current duration on the flux of ketoprofen was studied. The possibility of additive effect with penetration enhancer (PGML) was also investigated. Iontophoretic pretreatment of skin increased the passive flux up to 3 folds at 0.4 $mA/cm^2$ current density, when the matrix contained no PGML. As the duration of current-pretreatment and current density increased, flux increased. PGML increased the average passive flux markedly, about 6 to 12 folds, depending on the concentration in the patch. Current pretreatment further increased the flux from this PGML containing patch, exhibiting additive effect. These results indicate that short-duration current pretreatment of skin can be an useful method for the enhancement of ketoprofen permeability through skin.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.379-383
• /
• 2013

For the production of ethanol from freshwater cyanobacteria, a new pretreatment method using supercritical fluid was introduced. In this study, it was found that the supercritical fluid could penetrate inside the cell wall and help to liberate starch from cyanobacterial cells which resulted in the increase of the efficiency of ethanol production. For Microcystis aeruginosa, supercritical fluid pretreatment increased the amount of ethanol produced from cyanobacteria from 1.53 g/L to 2.66 g/L. For Anabaena variabilis, the amount of ethanol was increased from 1.25 g/L to 2.28 g/L. With use of supercritical fluid pretreatment, the efficiency of the process to obtain higher ethanol yields from freshwater cyanobacteria was improved upto 80%. The optimum temperature and pressure conditions for supercritical fluid pretreatment were determined as the temperature of $40^{\circ}C$ and the pressure of 120 atm. This study demonstrates the feasibility of using supercritical fluid pretreatment for ethanol production using freshwater cyanobacteria.

• 한국응용과학기술학회지
• /
• 제25권1호
• /
• pp.58-64
• /
• 2008

Pretreatment of eliminating FFA is needed to make biodiesel from animal fat recovered from leather wastes because its acid value is high. This study was carried out to investigate the influence of 4 different pretreatment methods, which are heterogeneous catalyst method, ion exchange resin method, low pressure.high temperature method, and alkali method on the eliminating FFA and fatty acid composition. The results showed that the rate of eliminating FFA increased in the order of alkali method > catalyst method > low pressure high temperature method > ion exchange method. In the case of pretreatment of alkali method using NaOH, the rate of eliminating FFA appeared more than 86% regardless of acid value. Therefore, it was considered that alkali method using NaOH was the most effective in the view of economical and productive aspects, taking it into account that the acid value of animal fat recovered from fleshing scrap generated during leather making processes was 7 to 8.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.114.1-114.1
• /
• 2011

Bioenergy production from lignocellulosic biomass and agriculture wastes have been attracted because of its sustainable and non-edible source. Especially, canola is considered as one of the best feedstock for renewable fuel production. Oil extracted canola and its agriculture residues are reuseable for bioethanol production. However, a pretreatment step is required before enzymatic hydrolysis to disrupt recalcitrant lignocellulosic matrix. To increase the sugar conversion, more efficient pretreatment process was necessary for removal of saccharification barriers such as lignin. Alkaline pretreatment makes the lignocellulose swollen through solvation and induces more porous structure for enzyme access. In our previous work, aqueous ammonia (1~20%) was utilized for alkaline reagent to increase the crystallinity of canola residues pretreatment. In this study, significant factors for efficient soaking in aqueous ammonia pretreatment on canola residues was optimized by using the response surface method (RSM). Based on the fundamental experiments, the real values of factors at the center (0) were determined as follows; $70^{\circ}C$ of temperature, 17.5% of ammonia concentration and 18 h of reaction time in the experiment design using central composition design (CCD). A statistical model predicted that the highest removal yield of lignin was 54% at the following optimized reaction conditions: $72.68^{\circ}C$ of temperature, 18.30% of ammonia concentration and 18.30 h of reaction time. Finally, maximum theoretical yields of soaking in aqueous ammonia pretreatment were 42.23% of glucose and 22.68% of xylose.

• 유기물자원화
• /
• 제19권3호
• /
• pp.79-89
• /
• 2011

강원도에서 확보한 폐옥수수대는 글루칸 44.6 %, 자일란 23.8 %, 리그닌 23.8 %, 회분 4.5 %, 기타 8.1 %로 이루어져 있다. 묽은 황산을 이용한 전처리 공정을 통계적 방법인 완전요인배치으로 분석한 결과 온도가 가장 중요한 변수로 나타났으며 자일로스 수율 기준으로 처리 시간과 농도에 비해 각각 3.5배와 3.2배 큰 영향력을 보여주었다. 포도당 수율에 대해서도 온도의 영향력이 가장 큰 것으로 나타났지만 포도당 수율은 전체적으로 5 % 이내의 낮은 값을 나타내었다. 마이크로웨이브와 초음파 각각을 이용한 전처리 공정은 그 효과가 크지 않거나 미미하였으나 묽은 황산처리와 복합적으로 적용했을 때는 그 효과는 상당히 큰 것으로 나타났다. 특히 마이크로웨이브와 묽은 황산처리를 순차적으로 적용했을 때 자일로스 수율은 2배 넘게 향상되었다. 향후에는, 다양한 복합 전처리 공정에 대한 심도있는 연구와 더불어 전처리와 효소당화 공정의 최적화에 대한 연구를 수행할 계획이다.

• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.662-669
• /
• 2019

Anaerobic digestion is a popular sewage sludge (Ss) treatment method as it provides significant pollution control and energy recovery. However, the low C/N ratio and poor biodegradability of Ss necessitate pretreatment methods that improve solubilization under anaerobic conditions in addition to anaerobic co-digestion with other substrates to improve the process efficiency. In this study, three pretreatment methods, namely microwave irradiation, ultrasonication, and heat treatment, were investigated, and the corresponding improvement in methane production was assessed. Additionally, the simplex centroid design method was utilized to determine the optimum mixture ratio of food waste (Fw), livestock manure (Lm), and Ss for maximum methane yield. Microwave irradiation at 700 W for 6 min yielded the highest biodegradability (62.0%), solubilization efficiency (59.7%), and methane production (329 mL/g VS). The optimum mixture ratio following pretreatment was 61.3% pretreated Ss, 28.6% Fw, and 10.1% Lm. The optimum mixture ratio without pretreatment was 33.6% un-pretreated Ss, 46.0% Fw, and 20.4% Lm. These results indicate that the choice of pretreatment method plays an important role in efficient anaerobic digestion and can be applied in operational plants to enhance methane production. Co-digestion of Ss with Fw and Lm was also beneficial.