• 패션비즈니스
• /
• 제10권1호
• /
• pp.31-40
• /
• 2006

We studied relation between the clothing pressure applied by types of brassiere, postures, feeling of tightness. The main results were summerized as follows; 1. The research subjects of this study were 9 who rate of body fat was borderline and degree of fatness was normal. As a result of clothing pressure, the most prefered value was $36.86g/cm^2$ on sensor 2 in standing position and the next was $34.76g/cm^2$ on sitting position. Furthermore, The maximum value of sensor 2 was $59.08g/cm^2$ (in standing), $57.93g/cm^2$ (in sitting). On the other hand, The average clothing pressure of bra C type was $23.67g/cm^2$ 2. The study of feeling of tightness applied by bra type was high in order of C

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.83-94
• /
• 1999

This study is about design of vehicle for air tightness to pressure waves of high speed train. When the train runs to high speed over 300km/h, the comfort of passenger come down due to difference pressure between inside and outside of passenger room. The car-body was carried out the design of air-tightness, and the analysis of inside pressure of vehicle in tunnel by TG_TUN of ALSTOM Co. The result of analysis should be used the design of air pressurized system and car-body of G7 high speed train project.

• 한국철도학회논문집
• /
• 제18권6호
• /
• pp.513-521
• /
• 2015

수도권광역급행열차(GTX)가 대심도 지하터널을 180km/h로 운행하면, 작은 터널단면적으로 인해 터널 압력파에 의한 승객이명감이 문제될 것으로 예상된다. 이에 대한 대책으로 GTX의 적절한 기밀성능이 확보되어야 한다. 본 논문에서는 1D 전산해석을 수행하여 객실 압력변동 기준을 만족하는 차량기밀도를 도출하였다. A라인 37km 지하터널과 해당구간의 영업운행 상황을 모사하여 차량내부 압력변동을 예측하였다. 전산해석결과 이명감 방지를 위한 차량의 기밀도 요구성능은 복선구간에서 3초 이상, 단선구간에서 6초 이상으로 나타났다. 본 연구의 결과는 GTX 차량 제작 시 차체기밀도 요구성능 결정을 위한 유용한 자료로 활용될 수 있다.

• 한국철도학회논문집
• /
• 제19권5호
• /
• pp.576-584
• /
• 2016

본 연구에서는 터널에서의 압력 변동값을 이용하여 차량의 기밀도를 측정하였다. 차량의 기밀도는 이명감과 깊은 관계가 있으므로, 차량의 기밀도를 추정하는 것은 실내 압력 변동을 파악하는데에 필수적이다. 차량의 기밀도를 알면, 실내압력 변동을 예측할 수 있다. 또한 이명감은 고속열차 뿐만아니라 급행 대심도 열차에서도 야기될 수 있는 문제이다. 본 연구에서는 각국의 다양한 이명감 기준을 비교 검토하였으며, ITX-청춘, KTX, KTX-산천(호남) 차량을 이용한 현차실험 데이터를 바탕으로 각 차량의 차량 기밀도를 추정하였다. 이 기밀도 값을 이용하여 차량 내부의 압력 변동값을 수치계산하였으며, 시험값과 비교하여 양호한 결과를 얻었다. 향후 고속차량 고속화를 위해서는 환기장치를 차단식이 아닌 연속환기 방식으로 할 필요가 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.220-224
• /
• 2002

As the train run through the tunnels, especially at high speed, pressure shock developed by the running train gives the influence on the pressure fluctuation inside the tunnel and consequently, inside the car. This pressure changes and pressure gradient is closely related with the tunnel section, train speed, air tightness of the train, length of the tunnel, etc. This study includes the analysis of the pressure behavior at the varied train speed and tunnel length. The results show that train speed affects the pressure gradient inside the car almost linearly, and that there exist the critical tunnel lengths that gives the maximum value of pressure change and pressure gradient, respectively.

• 한국의류학회지
• /
• 제17권2호
• /
• pp.197-206
• /
• 1993

We studied relation between the clothing pressure applied by foundations(waist nipper, girdle, body suit) on the waist of bodies and muscular activity, feeling of tightness. The main results were summerized as follows ; 1. Clothing pressure applied by foundations was high in order of girdle>waist nipper>body suit, also clothing pressure was higher back than front and side, sitting on the chair than standing posture, ventral flection than repose. Individual differences, even if size of body was equal, were shown in clothing pressure applied by foundations with subcutaneous fat's amount in measuring region. 2. The muscular activity of rectus abdominis than obliquus externus abdominis was more affected by foundations in all kinds of postures and motions. Amplitude of electromyogram was high sitting on the chair than standing posture, but there was little difference with motion variation. The wearing girdle strongly affected on the muscular activities of rectus abdominis and obliquus externus abdominis as compared with waist nipper and body suit. 3. The value for feeling of tightness by wearing waist nipper was higher than girdle and body suit. Also the case when sitting on the chair and ventral flection, the value for feeling of tightness was high. When the foundations were on the body, most tightened on the region of the body was anterior abdominal region.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.302-310
• /
• 2013

As an initial step to develop a liquid hydrogen pump of piston type operated under cryogenic and high pressure, leakage and piston head shape for the piston pump were discussed with temperature and pressure. As the results, the leakage depended on correlation among density, viscosity, clearance area by the low temperature. In order to reduce the leakage, it was found that the air-tightness can be improved by minimizing contact surface between piston and cylinder, and also increasing pressure in-cylinder can reduce piston clearance. Among the proposed piston shapes, D type piston shape had the most air-tightness. D type piston had smaller contact surface than other piston shape and easier expansion of cup shape by pressure. The leakage of D type piston shape was found about 7%, compared with A type piston shape. But it was required that analyze about vapor lock by friction and wear resistance.

• The Journal of Korean Physical Therapy
• /
• 제31권6호
• /
• pp.346-350
• /
• 2019

Purpose: The purpose of this study was to investigate the effects of calf tightness on gait, plantar pressure, and balance in adults. Methods: A total of 60 participants were divided into a normal group of 30 subjects with normal dorsiflexion angle (20-25 degrees) and an experimental group of 30 subjects with limited dorsiflexion angle (0-15 degrees) due to calf tightness. Gait ability and foot pressure of the subjects was measured with a treadmill, and the balance ability was measured by PROKIN system. Results: A significant difference in COP length, loading response, and single limb support was observed between groups. The COP length and single limb support ratio in the normal group was greater than in the experimental group, but the experimental group showed a higher ratio for loading response in the gait ratio. Conclusion: Our results indicated that calf tightness was negative effects on balance and gait ability, so assessment of the muscle tightness should be considered during exercise and treatment.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.643-649
• /
• 2011

LNG 선박에 사용되는 초저온용 버터플라이 밸브의 개발에 있어, 누설검증은 가장 중요한 설계공정 중 하나이다. 초저온에서 누설방지가 가능한 실로서 인코넬 스프링과 같은 탄성지지체가 포함된 O-링 형태의 메탈실이 널리 사용되고 있으나, 제작비가 고가인 단점을 갖고 있다. 이에 대한 대안으로 부가적인 탄성지지체 없이도 누설조건을 만족시키며, 제작비가 저렴한 탄성 메탈실의 개발이 요구되고 있다. 본 연구에서는 탄성 메탈실의 누설방지를 위한 설계조건을 정립하여, 초저온 및 고압환경에서 누설방지가 가능한 탄성 메탈실의 형상을 수치해석을 통해 고찰하였다. 아울러 이를 기반으로 시제품을 개발하고, 상온 및 초저온 상태에서 BS6755 및 BS6364 에 준하는 누설시험을 실시하여 누설여부를 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제37권1호
• /
• pp.39-45
• /
• 2016

A pressure measurement system was developed to verify magnitude and position of transferred pressure on the body surface during the intermittent pneumatic compression (IPC) which is one of the most well-known methods for the prevention of deep vein thrombosis (DVT). Eighty force sensing resistors (FSR) were arranged on a mannequin leg and a hardware controller sensed, digitized, and transferred pressure data every second while IPC was being applied. Finally, sensed pressure data were color coded and visualized on the 3D model with lab-developed software. The pressure data were also saved to files for further analysis. Using this measurement system, the changing pattern of pressure was measured on the mannequin leg by changing both chamber pressure and cuff tightness. As a result, net pressure transferred onto the body surface is dependent on chamber pressure and cuff tightness. Under the same chamber pressure, the tighter a cuff was worn, the wider compressed area was and the shorter compression cycle was. Also transferred pressure was proportional to both chamber pressure and cuff tightness.