• 접착 및 계면
• /
• 제6권3호
• /
• pp.19-25
• /
• 2005

합성 고무계 점착제는 일반적으로 SIS나 SBS 블록 공중합체와 점착부여수지, 가소제, 기타 첨가제를 함유한다. SIS/SBS 계 점착제는 우수한 접착력에도 불구하고 내용제성이나 내열성이 낮아서 그 사용에 한계가 있다. 이에 이러한 단점을 보완하고자 SIS/SBS 점착제에 가교제, 광개시제를 주성분으로 하는 자외선 경화 시스템을 도입하였다. 제조된 점착제는 thiol-ene 광중합 반응에 의해 가교하였으며 점착제의 프로브 택(probe tack), 박리강도(peel strength) 전단접착파괴온도(shear adhsion failure temperature, SAFT)를 측정하여 UV 경화형 점착특성을 고찰하였다. 또한 UV 경화형 점착제의 택 성질을 프로브 택을 이용하여 프로브 재료별, 점착제의 두께별의 영향을 살펴보았고 접촉각 측정을 통해 점착제 표면 변화를 살펴보았다.

• 접착 및 계면
• /
• 제5권4호
• /
• pp.1-8
• /
• 2004

다이싱 테이프에 사용되는 UV경화형 점착제를 아크릴 공중합체를 butyl acrylate, acrylic acid, methyl methacrylate를 용액 중합을 통해 중합한 뒤, trimethylolpropane triacrylate를 블렌딩하여 제조하였다. 제조된 점착제는 UV 조사량에 따라 접착력, 유리전이온도 ($T_g$)를 측정하였는데 UV 조사량이 증가할수록 접착력은 급격하게 감소하였고 $T_g$도 증가하였다. 웨이퍼 표면에 점착 샘플을 부착하여 UV 조사 후 박리하여 표면을 관찰한 결과 점착잔류물을 남기지 않았다.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.525-532
• /
• 2008

To prepare a solution type acrylic pressure-sensitive adhesive, quarter polymers were synthesized from butyl acrylate(BA), 2-ethylhexylacrylate(2-EHA) as a base monomer, methyl methacrylate(MMA) as a comonomer, each of methacrylic acid(MAA), acrylic acid(AA) as a functional monomer. Acrylic solution type pressure-sensitive adhesives(PSA's) of isocyanate derivative crosslinking PSA's were prepared by crosslinking of BEMM, BEMA with toluene-2,4-diisocyanate. The structure of adhesive was identified by FT-IR. The viscosity was measured by using Brookfield DV-III and molecular weight was measured by using gel permeation chromatography. The physical properties of polyethylene film coated with BEMMT, BEMAT were measured as a function of the concentration. As the result, BEMMT(0.6, 0.8), BEMAT(0.6) showed peel adhesion of $160{\sim}180\;g_f$/25 mm width and shear adhesion of more than 24 hours, and tackiness of $4/32{\sim}6/32$ which was relevant to commercial usage.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.517-523
• /
• 2006

The effects of particle content, size and shape on the thermal conductivity (k) and adhesion properties of thermally conductive, pressure-sensitive adhesives (PSAs) were investigated. The matrix resins were thermally crosslinkable, 2-ethylhexyl acrylic polyol and ultraviolet (UV)-curable, random copolymer consisting of acrylic oligomer and various acrylates. We found that k increased with increasing diameter and particle aspect ratio, and was further enhanced due to the reduction of the interfacial thermal barrier when the coupling agent, which increases the adhesion between particles and the matrix resin, was used. On the other hand, adhesion properties such as peel strength and tack of the thermally crosslinkable resin decreased sharply with increasing particle content. However, for UV curable resin, increased particle addition inhibited the decrease in adhesion properties.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.181-187
• /
• 2016

Transparent acrylic pressure sensitive adhesives (PSAs) were successfully prepared by photopolymerization with 2-ethylhexyl acrylate (2-EHA) and 2-hydroxyethyl acrylate (2-HEA) as a default constituent and with isobornyl acrylate (IBOA) and N-(isobutoxymethyl)acrylamide (IBMA) as a variable constituent. The IBMA mole fraction effect in the acrylic PSAs was investigated on adhesion performances and the optical properties including 85/85 test as well as the characteristics (solid content, and molecular weight) of the PSA syrups were also investigated. Regardless increasing the IBMA mole fraction in the acrylic PSAs, the acrylic PSAs exhibited almost the same adhesion performance such as $180^{\circ}$ peel strength (~4.0 kg/25 mm) and probe tack (~0.27 kg). All the acrylic PSA samples also showed high transmittance (more than 91%), low haze (less than 1.0%) and low color-difference (less than 1.0) before and after 85/85 test.

• 접착 및 계면
• /
• 제2권1호
• /
• pp.31-43
• /
• 2001

• 접착 및 계면
• /
• 제10권3호
• /
• pp.134-140
• /
• 2009

분자설계를 통하여 측쇄를 변화시킨 아크릴공중합체를 합성하여 아크릴공중합체 점착제와 초박형웨이퍼와의 젖음성 및 점착물성을 조사하였다. 선형 아크릴공중합체를 에폭시계 Tetra-DX 가교제와 반응시켜 3차원 망상구조를 형성하고 가교의 영향을 조사하였다. 계면상호작용보다는 아크릴공중합체의 측쇄변화가 젖음성에 더 큰 영향을 미쳤다. 가교도가 증가할수록 probe tack, peel strength가 감소하는 경향을 나타냈다. 가교에 의해 SAFT 내열성이 증가하였지만 가교제의 함량이 증가하면 오히려 SAFT 내열성이 감소하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.127-128
• /
• 2005

UV-curable pressure sensitive adhesives were prepared by blending acrylic copolymer, copolymerized with butyl acrylate (BA), acrylic acid (AA) and vinyl acetate (VAc) by solution polymerization, triethyl amine (TEA) and trimethylolpropane triacrylate (TMPTA). The PSAs were evaluated by peel strength with varying contents of TMPTA and UV dose, and also glass transition temperature($T_g$) of PSAs were measured. When exposed on UV irradiation, the PSAs showed the decreased peel strength and increased $T_g$. And following UV irradiation, the PSAs did not leave any residue on wafer after peel off PSA.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.1-11
• /
• 2010

The physicochemical characteristics, adhesion power, and conservation of imported tapes repairing documents that consisted of adhesive, carrier, and masking were investigated. Materials related to pressure sensitive adhesive produced in domestic companies were examined also. And then, the performance evaluation of prototype manufactured in our laboratory was undertaken. Both the pressure sensitive tapes were compared. The polyacrylate of adhesive agents such as polyacrylate, starch, Glue, and PVA of imported tapes was best. The adhesion strength, power, reversibility, and stability (deterioration) of imported tapes were analyzed. By comparing results of imported tapes, two adhesive agents were selected finally. The carriers of imported tapes are made of one of papers, cotton sheets, and felts. Major carrier material was a paper. The jutes, conifers, and hardwoods were main ingredient of papers. The durability of Hangi($18{\pm}2g/m^2$) was one and half times superior to imported one.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.282-289
• /
• 2009

건축현장에서 건물 방음 및 단열재의 씰링 용도로 일반 pressure-sensitive adhesive(PSA) tape이 주로 사용되고 있다. 일반 PSA tape은 먼지와 같은 이물질에 의해 점착력이 쉽게 감소하고 두께가 얇기 때문에 외부 자극에 의한 변형 및 파손이 쉽게 발생하여 방음재의 씰링 역할을 제대로 수행하지 못하는 결과가 발생하며, 이는 부실공사의 원인이 되기도 한다. 이러한 문제를 해결하기 위하여 본 연구에서는 FKM과 SBS를 이용하여 아스팔트를 개질하여 점착제로 적용하고자 하였다. 본 연구에서는 아스팔트의 점착력을 향상 시켜주기 위하여 선형과 방사형의 styrene-butadiene-styrene(SBS) 3, 6, 9 wt.%, 폐불소고무(FKM: fluoroelastomers) 10, 20, 30 wt.%를 아스팔트에 첨가하여 개질 아스팔트를 제조하였고 이들의 연화점, 점도, 인장강도 및 점착력 등의 물리적 특성을 평가하였다. SBS 개질 아스팔트는 SBS가 첨가됨에 따라 연화점 및 점도가 상승하는 거동을 나타냈으며 순수 아스팔트 보다 높은 점착력을 나타내었다. FKM 개질 아스팔트의 경우는 FKM이 첨가 되어도 연화점 및 점도 변화가 없었으며 FKM과 아스팔트의 낮은 계면 결합력으로 점착력이 증가하지 않았다. 온도가 증가할수록 개질 아스팔트의 점도는 감소하였지만 SBS 개질 아스팔트의 경우에는 온도상승에 따른 점도 감소가 적어 상당히 넓은 온도 범위에서 점착력을 유지하였으며 선형 SBS가 6 wt.% 첨가된 것이 최적의 점착 특성을 나타내었다.