• Asian Oncology Nursing
• /
• v.2 no.1
• /
• pp.17-26
• /
• 2002

Purpose: This study was conducted to evaluate the effects of aerobic dance on physical functionnings of women with mastectomy. The study was single group pre- & post-test time series design. The aerobic dance program was performed three times a week for eight weeks, 45${\sim}$60 minutes per session. Method: The research variables used in the study were the period(seconds) of exercise that was taken for target heart rate, activity systolic pressure, range of motion of shoulder joint in affected side, and flexibility for physical functionnings. The data were analyzed with repeated measure ANOVA and Bonferroni multiple comparisons. Results: Over the period of aerobic dance, the degree of all the research variables were changed significantly, and also differed significantly every 2 to 4 weeks. The period(seconds) of exercise that was taken for target heart rate (p <.000), systolic pressure in exercise(p =.019), range of motions of shoulder joint on the affected side(flexion, abduction, over-adduction, over-extension, external & internal rotation), and flexibility(sit & reach, back & reach) (p= .003; p=.001; p(.001; p<.001; p= .014; p<.001; p=.036; p<.001) were differed significantly respectively. Conclusion: The results suggest that the aerobic dance program for women with mastectomy can improve and recover cardiopulmonary endurance and ROM of shoulder joint and that the period of exercise had to be performed over six to eight weeks and three times a week at least.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.236-236
• /
• 2008

(Bi,La)$Ti_3O_{12}$(BLT) thin film is one of the most attractive materials for ferroelectric random access memory (FRAM) applications due to its some excellent properties such as high fatigue endurance, low processing temperature, and large remanent polarization [1-2]. The authors firstly investigated and reported the damascene process of chemical mechanical polishing (CMP) for BLT thin film capacitor on behalf of plasma etching process for fabrication of FRAM [3]. CMP process could prepare the BLT capacitors with the superior process efficiency to the plasma etching process without the well-known problems such as plasma damages and sloped sidewall, which was enough to apply to the fabrication of FRAM [2]. BLT-CMP characteristics showed the typical oxide-CMP characteristics which were related in both pressure and velocity according to Preston's equation and Hernandez's power law [2-4]. Good surface roughness was also obtained for the densification of multilevel memory structure by CMP process [3]. The well prepared BLT capacitors fabricated by CMP process should have the sufficient ferroelectric properties for FRAM; therefore, in this study the electrical properties of the BLT capacitor fabricated by CMP process were analyzed with the process parameters. Especially, the effects of CMP pressure, which had mainly affected the removal rate of BLT thin films [2], on the electrical properties were investigated. In order to check the influences of the pressure in eMP process on the ferroelectric properties of BLT thin films, the electrical test of the BLT capacitors was performed. The polarization-voltage (P-V) characteristics show a decreased the remanent polarization (Pr) value when CMP process was performed with the high pressure. The shape of the hysteresis loop is close to typical loop of BLT thin films in case of the specimen after CMP process with the pressures of 4.9 kPa; however, the shape of the hysteresis loop is not saturated due to high leakage current caused by structural and/or chemical damages in case of the specimen after CMP process with the pressures of 29.4 kPa. The leakage current density obtained with positive bias is one order lower than that with negative bias in case of 29.4 kPa, which was one or two order higher than in case of 4.9 kPa. The high pressure condition was not suitable for the damascene process of BLT thin films due to the defects in electrical properties although the better efficiency of process. by higher removal rate of BLT thin films was obtained with the high pressure of 29.4 kPa in the previous study [2].

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.607-617
• /
• 2023

This study aims to analyze whether the performance of the fire extinguisher meets the criteria for the apparent specific gravity property test by calculating the change in internal pressure and the use period of the fire extinguisher as a new one with 5 years, recycled one with 5 years, a new one with 10 years, and a new one with 13 years, respectively. As a result of the experiment, when the internal pressure of the fire extinguisher was 0%, the first, second, and third arithmetic mean analysis of the dry chemical extinguisher according to the use period was found to be condemned. When the internal pressure of the fire extinguisher was 50%, it was measured as 130 ml in sample 12-08-new and analyzed as unsuitable. Also, sample 09-09-new of a new dry chemical extinguisher with 13 elapsed years measured 145ml, which was found inappropriate. All other dry chemical extinguishers were analyzed to be suitable. All were noted suitable when having normal internal pressure of the fire extinguisher, except for sample 09-06 of a new dry chemical extinguisher with 13 elapsed years, which was determined to be unsuitable caused by measuring as 131 ml for experimental value. As a result of experiments, some of the apparent specific gravity tests of dry chemical extinguishers from 10 years to 13 years have found that they are unsuitable for the performance of the fire extinguishers due to the massive phenomenon. Accordingly, it is necessary to reduce the endurance period of dry chemical extinguishers from 10 years to 7 years.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.331-346
• /
• 2018

In the tunnel of domestic high - speed railway, the main fire - fighting facility, fire - extinguishing passageway, is installed. However, due to the high pressure of the high - speed train, frequent breakage and maintenance are caused by strong shock and long - term vibration. In order to solve these problems, it is necessary to improve the fire door, but in Korea, it is installed by submitting a certificate by simple KS F 2296 performance test. At present, it is developed as a simple test certification by producing a real scale fireproof door without the theoretical examination in advance, so that a high cost for improvement is occurring in Korea. Therefore, through this study, structural analysis study which can preliminary structure review was carried out in order to design the refuge connection passage fire door and to improve the performance improvement. In order to secure the reliability of the result value, the official authentication test (KS F 2296) were compared.

• Journal of Digital Convergence
• /
• v.12 no.7
• /
• pp.297-304
• /
• 2014

The present study was designed to investigate the effect of home based exercise program on balance recovery of stroke patients. In total, 20 participants were assigned to a control group(n=10) or exercise group(n=10) between September 2013 and December 2013. In addition to existing physiotherapy, the exercise group received home based exercise program consisting of weight transfer, training endurance, mobility, sensory retraining, lower limb exercise for 30 minutes, 2 times a week, for 8 weeks, every time for 30 minutes. Balance ability was assessed by measuring foot pressure(FP), limit of stability(LOS) and velocity sway(VS) by using Biorescue and by using the functional reaching test(FRT). To compare the improvement level of each group's balance ability, examination of independent sample T was done. Significant differences between control group and exercise group in LOS, VS of affect side and FRT were observed. This study showed that home based exercise program application was effective strategy on balance recovery in a post stroke population.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.1 s.20
• /
• pp.51-54
• /
• 2004

In recently days, the breed fish farm is increased in the beach side for farming fish. In such a farm, the heater is requested for preventing freezing in cold season. The heating material are requested high corrosion resistance and strength for endurance high corrosive salt and pressure. In case of low corrosion resistance and/or strength, the heating element shall be broke down and eventually make spillage or leaking contaminated salt. In the most cases, crevice corrosion is localized form of corrosion usually associated with a stagnant solution on the micro-environmental level. In this study, the crevice corrosion of Ferritic type 430 stainless steel is investigated. The size of specimen is $15{\times}20{\times}3mmt$. Test solution is 1N H2SO4 + 0.05N NaCl. The artificial crevice gap size is $0.24{\times}3{\times}15mmL$. Crevice corrosion is measured under applied voltage 300mV(SCE) to the external surface. the result of this study showed that 1) the induced time for initiation of crevice is 750seconds, 2) potential is dropped in the crevice from the top of gap opening from -320 to -399mV. The result confirmed that the potential drop(IR mechanism) in the crevice is one of mechanism for crevice corrosion.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.4
• /
• pp.631-642
• /
• 2015

The purpose of the study was to examine health status and mini nutritional assessment (MNA) according to self-esteem status of elderly in care hospital. The survey was carried out from $13^{th}$ to $31^{st}$ of September, 2014 in five care hospitals. Analysis was performed for 226 subjects. Evaluation criteria included demographics, clinical status, MNA, health-related quality of life (EQ-5D) and self-esteem. The SE I, SE II and SE III groups were divided by self-esteem scores. Data were analyzed one-way ANOVA, Duncan' multiple range test and Pearson's correlation using SPSS 15.0. Education level, religion, dental condition and medical endurance type were significantly different in all groups. Many elderly people were normal BMI ($20.94{\sim}21.67kg/m^2$). Self-esteem significantly increased in order of SE I, SE II and SE III. Mobility, usual activity and anxiety or depression were significantly different in all groups, and EQ-5D of SE II and SE III groups were significantly higher than that of SE I group. Comparison of MNA screening score in elderly patients was as follows : Score for food intake, psychological stress or acute disease, neuropsychological problems, pressure scores or skin ulcer, protein intake, mode of feeding, nutritional status and health status in SE I group were significantly lower than those of SE II and SE III groups. Mobility and drug intake of SE I group were significantly lower than those of SE III groups. Fruit and vegetable intake SE I group were significantly higher than those of SE II and SE III groups. MIS (Malnutrition Indicator Score) was significantly different among the SE I, SE II and SE III groups. We conclude that self-esteem score is positively correlated with protein intake, nutrition status, health status and MIS in elderly care hospital. To improve nutritional status of elderly in care hospitals, systematic nutrition management and self-esteem education program should be implemented.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.77-84
• /
• 2024

Objectives: Interventions promoting physical exercise and healthy habits in workplaces have been shown to be effective in reducing risk factors for metabolic syndrome. This study was conducted to examine the effects of an individualized conditioning exercise program of IT company office workers with or at higher risk of metabolic syndrome. Methods: A total of 444 IT company office workers with or at higher risk of metabolic syndrome participated in a 3-month conditioning exercise program. Body composition data using bioelectrical impedance analysis and cardiopulmonary data using cardiopulmonary exercise testing from 53 individuals (mean age: 34.8 ± 7.1 years, sex : 21% female, height : 170.4 ± 6.8 cm, weight : 75.2±12.2 kg, body mass index : 25.8±3.3 kg/m²) who have successfully completed pre-test, intervention, and post-test were analyzed. The 12 weeks intervention encompassed: (1) health counseling (2) supervised exercise(endurance-based, aerobic exercise, or circuit training once a week for 50 minutes at heart rate reserve(HRR) of 77-95%) (3) self-directed exercise and biweekly health screening checks. Results: The results indicated a significant decrease in body weight, body fat mass and body mass index, respectively. Moreover, VO₂peak, AT VO₂ and AT Time significantly improved, respectively. Resting blood pressure(SBP/DBP) showed positive changes but were not statistically significant. We observed the correlation between characteristics of participants and rate of changes in cardiopulmonary outcomes of participants, there are no significant correlation. These results indicate positive changes in body composition and cardiorespiratory fitness parameters following individualized conditioning exercise program. Conclusions: Individualized workplace exercise program for preventing metabolic syndrome can lead to improvements in body composition and cardiorespiratory fitness.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.17-36
• /
• 1984

Since 1973, the competition on the development of fuel saving type internal combustion engines has become severe by the two times oil shock, and new type engines are reported every several months. Whenever these new type engines are developed, new designs are required and they will be offered in the market after performing the endurance test for a long time. But the engine market is faced with a heavy burden of finance, as the developing of a new engine requires tremendous expenses. For this reason, the computer simulation method has been lately developed to cope with it. The computer simulation method can be available to perform the reasonable research works by the theoretical analysis before carrying out practical experiments. With these processes, the developing expenses are cut down and the period of development is curtailed. The object of this study is the development of simulation computer program for the small naturally aspirated four-stroke diesel engine which is intended to product by the original design of our country. The process of simulation is firstly investigated for the ideal engine cycle, and secondly for the real engine cycle. In the ideal engine cycle, each step of the cycle is simulated by the energy balance according to the first law of thermodynamics, and then the engine performance is calculated. In the real cycle imulation program, the injection rate, the preparation rate and the combustion rate of fuel and the heat transfer through the wall of combustion chamber are considered. In this case, the injection rate is supposed as constant through the crank angle interval of injection and the combustion rate is calculated by the Whitehouse-Way equation and the heat transfer is calculated by the Annand's equation. The simulated values are compared with measured values of the YANMAR NS90(C) engine and Mitsubishi 4D30 engine, and the following conclusions are drawn. 1. The heat loss by the exhaust gas is well agree with each other in the lower load, but the measured value is greater than the calculated value in the higher load. The maximum error rate is about 15% in the full load. 2. The calculated quantity of heat transfer to the cooling water is greater than the measured value. The maximum error rate is about 11.8%. 3. The mean effective pressure, the fuel consumption, the power and the torque are well agree with each other. The maximum error is occurred in the fuel consumption, and its error rate is about 7%. From the above remarks, it may be concluded that the prediction of the engine performance is possibly by using the developed program, although the program needs to reform by adding the simulation of intake and exhaust process and assumping more reliable mechanical efficiency, volumetric efficiency, preparation rate and combustion rate.

• 한국노년학
• /
• v.29 no.4
• /
• pp.1397-1411
• /
• 2009

This study was aimed to examine the effects of intermittent walking on health related fitness and metabolic syndrome risk factors in elderly women. Forty five elderly women were randomly assigned to three groups: three 10-min walks per day, one 30-min walk per day or no exercise, respectively. Both walking groups exercised three days a week at moderate intensity for 12 weeks. Two-way repeated measures ANOVA was used to test the hypothesis with a significant level of α = .05. The results indicated that body composition(body weight, body mass index, percent body fat), muscle endurance, flexibility and cardiorespiratory fitness significantly increased after 12 weeks for both walking groups. However, it was found that muscle strength significantly increased only in a continuous walking group. Metabolic syndrome risk factors comprised of waist circumference, systolic blood pressure, triglyceride, high-density lipoprotein, and fasting glucose were significantly improved in both walking groups. In addition, there was a difference in these metabolic syndrome risk factors between pre and post exercise. The results of this study support the hypothesis that intermittent walking has a significant impact on health related physical fitness and metabolic syndrome rick factors in elderly women as continuous walking does.