• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.273-281
• /
• 2001

Feasibility study of gas-lubricated bearing in micro gas turbine was performed. Based on Reynolds equation, finite difference method with coupled boundary was developed to analyze bearing characteristics, such as load-carrying capacity, mass flow rates and stiffness. By the bearing force and mass flow rates analysis with the variation of supply pressure, bearing clearance and capillary radius, acceptable range of design parameters were suggested in terms of load capacity and stiffness of bearings. Additionally, coupled boundary effect on pressure distribution was investigated and it is stated that coupling could reduce all excitation force due to narrow pressure distribution.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1275-1281
• /
• 2001

Aqueous polymer solutions are known to have small pressure reduction. Paraffin slurries are known to have high thermal capacity. Paraffin particles are mixed into an aqueous polymer solution to make a new heat transfer fluid having high thermal capacity but low pressure reduction. The heat transfer characteristics of the new slurry was tested in a circular tube having a constant heat transfer boundary condition. The new slurry was found to have high Nusselt numbers as well as high thermal capacity and low pressure reduction in the laminar flow. The trends of the Nusselt numbers along the heating test section were studied for various heating conditions.

• The Journal of Korean Physical Therapy
• /
• 제25권5호
• /
• pp.330-336
• /
• 2013

Purpose: Respiratory is an essential vital component for conservation of life in human, which is controlled by respiratory muscles and its related neuromuscular regulation. The purpose of this study is to assess lung capacity and respiratory pressure in healthy children, and to investigate relationship and predictability between respiratory pressure and other related respiratory functions. Methods: A total of 31 healthy children were recruited for this study. Demographic information and respiratory related factors were assessed in terms of body surface area (BSA), chest mobility, lung capacity, and respiratory pressure. Correlation between respiratory pressure and the rested variables was analyzed, and multiple regression using the stepwise method was performed for prediction of respiratory muscle strength, in terms of respiratory pressure as the dependent variable, and demographic and other respiratory variables as the independent variable. Results: According to the results of correlation analysis, respiratory pressure showed significant correlation with age (r=0.62, p<0.01), BSA (r=0.80, p<0.01), FVC (r=0.80, p<0.01), and FEV1 (r=0.70, p<0.01). In results of multiple regression analysis using the backward elimination method, BSA and FVC were included as significant factors of the predictable statistical model. The statistical model showed a significant explanation power of 71.8%. Conclusion: These findings suggest that respiratory pressure could be a valuable measurement tool for evaluation of respiratory function, because of significant relationship with physical characteristics and lung capacity, and that BSA and FVC could be possible predictable factors to explain the degree of respiratory pressure. These findings will provide useful information for clinical assessment and treatment in healthy children as well as those with pulmonary disease.

• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.343-351
• /
• 2011

원자로 격납건물은 원자력발전소에서 발생가능한 모든 비상사태에 대한 최후의 방벽 역할을 하고 있다. 따라서 사고발생시 원자로 격납건물의 극한능력을 판단하는 것은 매우 중요하다. 대표적인 고려사항 가운데 하나인 LOCA사고 발생시 CANDU형 원자로 격납건물의 극한능력을 파악하기 위해서는 구조적 안전성 평가를 위한 구조해석이 필요하다. CANDU형 원자로 격납건물은 돔과 원통형벽체로 구성된 프리스트레스 콘크리트 쉘 구조물로서 부착식 텐돈을 사용하고 있다. 본 논문에서는 극한내압능력의 평가를 위하여 3차원 구조해석시스템을 사용한 프리스트레스 콘크리트 격납건물의 비선형해석을 수행하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.311-315
• /
• 2006

Various core shapes of cylindrical drains are used for accelerating primary consolidation for soft clay deposits, but serious harmful disadvantages on drainage capacity may occur on cylindrical drains due to confining Pressure when they are installed in that soil. In this study, two different core shapes of cylindrical drain are used to evaluate the drainage capacity with consideration of clogging effects on their filter jackets for an applied confining pressure. Column tests with radial drainage system were conducted under confining pressure of 50 kPa for 13 days. Two parameters which are discharge and accumulated volume of water drained were measured as the time elapsing. From this experimental study, the results showed that at the Initial stage before the clogging developed enough, the cylindrical drain with angular-type-plastic-core could produce discharge twice higher (maximum) than those with round-type. After 13 days had passed on, cylindrical drain with angular-type-plastic-core could produce discharge only 20% higher than those with round-type one. Eventually, there is a possibility that the efficiency of using angular-type-cylindrical-drain will be similar to the round-type one as the clogging develops more.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.247-252
• /
• 2004

To secure stability and availability of Rammed Aggregate Pier method as the foundation of a structure, the bearing capacity and failure behavior characteristics was studied through soil laboratory tests in a model ground. In this study, soil laboratory tests use carried out to find the applicability of RAP method as the foundation of a structure. And bearing capacity and the failure mechanism of RAP method was studied according to relative density($60\%,\;70\%,\;90\%$), diameter(45mm, 60mm, 70mm) of each pier ana depth(5cm, l0cm, 15cm, 20cm, 25cm, 30cm). Earth pressure cell is set up approach RAP and 1.0D space at RAP center. Bearing acpacity and the failure mechanism of RAP is investigated by load test As a result, bulging failure was happened in $5\~10cm\;(1.0D\~2.00)$ depth which the maximum lateral earth pressure is acting. Especially, diameter changing of RAP are in inverse proportion to the relative density and the lateral stress is very much influenced by the lateral earth pressure in every layer and tends to decrease according to depth.

• 설비공학논문집
• /
• 제5권3호
• /
• pp.198-206
• /
• 1993

Experimental results of two stage Gifford-McMahon cryorefrigerator are described. In-prototype experiments, drive mechanism is Scotch Yoke type driven by stepping motor, copper meshes and lead balls are used for regenerator's materials in the first stage and the second stage, respectively. To find optimal conditions of the cryopump, no load temperature and refrigeration capacity according to the variation of cycle frequency and operating pressure are measured, and the cool down and load characteristics at particular cycle frequencies are presented. In general, as the cycle frequency is lowered, no load temperature is dropped but refrigeration capacity is diminished. As the representative result, in a case that the cycle frequency is 70rpm and steady state pressure is 14 atm, no load temperature of second stage is lowered to 10.5K in 55 minuters, and in this situation the refrigeration capacity of the first stage is 42W at 80K, that of the second stage is 11 W at 20K.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.120-125
• /
• 2014

In this paper, suitable working fluid of 1MW Organic Rankine Cycle(ORC) with liquid-vapor ejector using effluent from power plant is selected. The results of comparison performance of 5 refrigerants are as follows; R600a, R134a, R1270, R236fa, R235fa. The operating parameters considered in this study include the condensation capacity evaporation capacity and efficiency. As a result of comparison of basic ORC system and with liquid-vapor ejector, with ORC system presents the higher system efficiency since the ejector makes the turbine outlet pressure lower than condensation pressure through its pressure recovery. Also, this ejector ORC system is advantageous in miniaturizing the size of components owing to decrease of evaporation capacity and condensation capacity.

• Nuclear Engineering and Technology
• /
• 제40권1호
• /
• pp.77-86
• /
• 2008

This paper describes the nonlinear analyses of a 1:4 scale model of a prestressed concrete containment vessel (PCCV) using an axisymmetric model and a three-dimensional model. These two models are refined by comparison of the analysis results and with testing results. This paper is especially focused on the analysis of behavior under pressure and the temperature effects revealed using an axisymmetric model. The temperature-dependent degradation properties of concrete and steel are considered. Both geometric and material nonlinearities, including thermal effects, are also addressed in the analyses. The Menetrey and Willam (1995) concrete constitutive model with non-associated flow potential is adopted for this study. This study includes the results of the predicted thermal and mechanical behaviors of the PCCV subject to high temperature loading and internal pressure at the same time. To find the effect of high temperature accident conditions on the ultimate capacity of the liner plate, reinforcement, prestressing tendon and concrete, two kinds of analyses are performed: one for pressure only and the other for pressure with temperature. The results from the test on pressurization, analysis for pressure only, and analyses considering pressure with temperatures are compared with one another. The analysis results show that the temperature directly affects the behavior of the liner plate, but has little impact on the ultimate pressure capacity of the PCCV.

• Restorative Dentistry and Endodontics
• /
• 제34권6호
• /
• pp.491-499
• /
• 2009

본 연구의 목적은 구강상피세포를 배양한후 각기 다른 조건의 냉동 보존법으로 6일간 보존시 각각의 세포의 활성도를 Cell counting, WST-1, Clonogenic capacity의 방법을 이용하여 비교 평가하기 위함이다. 각 실험군당 $1\times10^6$개의 세포를 다음의 방법으로 6일간 냉동 보존한다. Freezing container에 담아 $1^{\circ}C$/min의 냉동속도로 $-70^{\circ}C$까지 냉동 후 $-196^{\circ}C$에 냉동하여 보관한 일반 냉동 보존군, 세포를 바로 $-196^{\circ}C$의 액화질소에 넣어 냉동한 급속 냉동 보존군, $4^{\circ}C$에서 $-35^{\circ}C$까지 $-0.5^{\circ}C$/min속도로 서서히 냉동시킨 뒤 $-196^{\circ}C$에 냉동한 저속 냉동 보존군, 2 Mpa, 3 Mpa의 압력을 가하고 $-0.5^{\circ}C$/min속도로 $4^{\circ}C$에서 $-35^{\circ}C$까지 서서히 냉동시킨 뒤 $-196^{\circ}C$에 냉동한 2 Mpa, 3 Mpa압력 저속 냉동 보존군으로 나누었다. 6일 후 냉동되었던 세포를 급속 해빙하여 각각의 Cell counting, WST-1, Clonogenic capacity 값을 측정하여 비교하였다. 실험 결과 2 Mpa혹은 3 Mpa의 압력을 이용한 저속 냉동법이 저속 냉동법 및 급속 냉동법 보다 세포 활성도에 있어 우수한 경향을 나타내었다.