• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.9
• /
• pp.408-413
• /
• 2005

This paper presents the basic design technology on the hybrid type GCB(gas circuit breakers) through the test results. The three type hybrid interrupters according to the arrangement of the thermal expansion chamber and the puffer cylinder(they are called 'serial type', ' parallel/exchanged type ,' and ' parallel/separated type ' respectively in this work) were designed and manufactured and then the tests of operating characteristics and interrupting were performed using a simplified synthetic test facility. The interruption capability with the type and the opening speed and the pressure rise which is required to interrupt were examined. The change of pressure rise with the number of interruption was given quantitatively and therefore the pressure rise can be predicted. Finally, it was shown that the interruption capability tends to increase with the increasing of opening speed in the puffer type; however, the hybrid type interrupter has a different interruption characteristic.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.204-210
• /
• 2003

A PC-based analysis and design system of exhaust muffler is described. It makes use of software packages such as Sysnoise and STAR-CD to calculate transmission loss(TL) and back pressure. The system is applied to redesign a main muffler of passenger car to improve its performance. The effects of design parameters on acoustic and pressure loss characteristics are examined. Taguchi method Is used to determine optimal combination of parameters which affects muffler performances such as TL and back pressure. Three models are chosen and compared in laboratory bench test and engine dynamometer test to prove their performances.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4146-4158
• /
• 2023

This paper proposes a combined plastic and creep constitutive model of A533B1 pressure vessel steel to simulate progressive deformation of nuclear pressure vessels under severe accident conditions. To develop the model, recent tensile test data covering a wide range of temperatures (from RT to 1,100 ℃) and strain rates (from 0.001%/s to 1.0%/s) was used. Comparison with experimental data confirms that the proposed combined plastic and creep model can well reflect effects of temperature and strain rate on tensile behaviour up to failure. In the companion paper (Part II), the proposed model will be used to simulate OECD lower head failure (OLHF) test data.

• Journal of Acupuncture Research
• /
• v.20 no.5
• /
• pp.82-92
• /
• 2003

Objective: To appreciate the effect of San-Yin-Jiao(SP-6) pressure on duratof delivery time and quantity of blood loss in order to verify the possibility of application to clinic of San-Yin-Jiao pressure. Methods: The design of this study is nonequivalent control group non- synchronized design. The subjects are 39 persons who are made up of SP-6 pressure applied(experimental) group 20 persons and to control group 19 persons. Collected data were analyzed as frequency, percentage, t-test, $x^2-test$ using SPSS 10.0 WIN Program. Conclusions: San-Yin-Jiao(SP-6) pressure not only make short duration of delivery time, but also decline quantity of blood loss in effect. 1. It could be necessary that the study of the effects of San-Yin-Jio(SP-6) pressure on duration of delivery time and quantity of blood loss for primipara be done repeatedly. 2. It could be necessary to increase this sort of study through free random experimental design in order to generalize this experimental result.

• Journal of Home Health Care Nursing
• /
• v.27 no.1
• /
• pp.102-113
• /
• 2020

Purpose: To demonstrate the importance of comprehensive skin observation as an effective intervention for pressure injury prevention in elderly long-term care hospital patients. Methods: The survey was conducted with 70 nursing staff members working at two long-term care hospitals with 200 beds or less in D city. Data were collected from October 16 to October 23, 2019 and analyzed using descriptive statistics, the chi-square test, and the independent t-test with the SPSS 25.0 program. Results: Nursing care knowledge for pressure injury was similar between the two groups. Conversely, nursing care performance for pressure injury degree of the nursing staff in the hospital using skin observation records performed better than those who did not (t=6.11, p<.001). Furthermore, comprehensive skin assessments in long-term care hospitals using skin observation records showed a lower incidence rate of pressure injury than that showed using general skin assessments (t=-5.28, p=.006). Conclusions: Comprehensive skin assessment is important for pressure injury prevention in elderly long-term care hospital patients. To implement this effectively, it is necessary to devise institutional regulations, guidelines, and systematic education programs.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.1
• /
• pp.38-46
• /
• 2006

The characteristics about the pressure drop in microtubes have been investigated. The test tubes are the circular, seamless, stainless steel tubes with an inner diameter of 0.244, 0.430, and 0.792 mm, respectively. R-l34a was used as a test fluid. Early flow transition which has been reported in some previous studies is not found in single-phase flow pressure drop tests. The conventional theory between friction factor and Reynolds number predicted the experimental friction factors within an absolute average deviation of $8.9\%$. The two-phase flow pressure drop increases for higher quality and mass flux, and for reduced inner diameter. The existing correlations fail to predict the experimental data. A new correlation to predict the two-phase flow pressure drop is developed in the form of the Lockhart-Martinelli correlation. The effects of the tube diameter and the surface tension were considered, and the correlation predicted the experimental data within an average absolute deviation of $8.1\%$.

• Biomedical Science Letters
• /
• v.16 no.1
• /
• pp.25-32
• /
• 2010

Sprague-Dawley(SD) rats were orally administered with $N^G$-nitro-L-arginine methyl ester(L-NAME) which inhibits or blocks the production of nitric oxide from L-arginine in vascular endothelial cells and vessel tissue to statistically examine the effects of nitric oxide on some physiological changes such as blood pressure and heart rate, and to confirm the apoptosis induced by the suppressed nitric oxide activity in some related organs under light microscope. Systolic blood pressure significantly increased 28.5% by the chronic treatment of L-NAME for 8 weeks (P<0.001), no significant difference, however, was observed in heart rate between the control group and the L-NAME-treated group regardless of their age. Hematoxylin-eosin staining showed some histological alterations only in kidney among the examined organs; heart, liver, pancreas, and adrenal gland from the L-NAME-treated group. TUNEL (terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling) test showed a strong positive reaction, representing that the chronic treatment of L-NAME facilitates apoptosis, in the cortex and medulla of kidney, but not any significance detectable in the other organs. These results conclude that chronic treatment of L-NAME significantly increases blood pressure, and that the followed inhibition of nitric oxide synthesis occurs a typical inducement of apoptosis in kidney.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.152-159
• /
• 2010

This paper describes the actual application of a feedback control loop as a means for minimizing turbine impulse chamber pressure variation during the turbine steam valve tests at a 1,000 MW nuclear power plant. The chamber pressure control loop was implemented in the new digital control system which was installed as a replacement for the old analog type control system. There has been about 40MW of the generator output change during the steam valve tests, especially the high pressure governing valve tests, because the old control system had not the impulse chamber pressure control so the operators had to compensate steam flow drop manually. The process of each valve test consists of a closing process and an reopening process and the operators can make sure that the valves are in their sound conditions by checking the valves movement. The control algorithm described in this paper contributed to keep the change in megawatt only to 6MW during the steam valve tests. Thereby, the disturbance to reactor control was reduced, and the overall plant control system's stability was greatly improved as well.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.312-333
• /
• 2006

This paper presents the results of an analysis of the excess porewater pressure distribution due to piezocone penetration in overconsolidated clays. From piezocone test results for moderately and heavily overconsolidated clays, it was observed that the excess porewater pressure increases monotonically from the piezocone surface to the outer boundary of the shear zone and then decreases logarithmically to the outer boundary of the plastic zone. It was also found that the size of the shear zone decreases from approximately 2.2 to 1.5 times the cone radius with increasing OCR, while the plastic radius is about 11 times the piezocone radius, regardless of the OCR. The equation developed in this study based on the modified Cam clay model and the cylindrical cavity expansion theory, which take into consideration the effects of the strain rate and stress anisotropy, provide a good prediction of the initial porewater pressure at the piezocone location. The method of predicting the spatial distribution of excess porewater pressure proposed in this study is based on a linearly increasing ${\Delta}u_{shear}$. In the shear zone and a logarithmically decreasing ${\Delta}u_{oct}$, and is verified by comparing with the excess porewater pressure measured in overconsolidated specimens at the calibration chamber.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.4
• /
• pp.497-504
• /
• 2011

Purpose : Chronic cervical pain is a common source of disability in society. There has been no research regarding the amount of pressure for the deep cervical flexors during cranio-cervical flexion exercise (CCFE). The purpose of this study is to determine optimal pressure levels to facilitate deep cervical muscles (longus colli & longus capitis) during cranio-cervical flexion exercise, using ultrasound measurement of the muscles. Methods : Using a cross-sectional design, the study was performed in an experimental group of 19 subjects (7 men, 12 women) with no cervical pain. Participants were instructed to perform the CCFE, and during the five incremental stages of the test, changes in thickness, as compared to resting baseline values, were measured using ultrasonography for sternocleidomastoid muscle (SCM) and deep cervical muscles (DCF). Results : Both DCF and SCM muscles demonstrated an increase in recruitment with each progressive phase of the test. In comparing the different pressure increments, the most significant changes found in DCF thickness were between phase 2 and phase 3 (p<.05). However no differences were found between pressure increments for SCM thickness (p>.05). Conclusion : The results suggest 26 mm Hg as the optimal pressure level during cranio-cervical flexion exercise for facilitation of deep cervical flexor.