• 한국추진공학회지
• /
• 제26권1호
• /
• pp.98-106
• /
• 2022

고고도에서 작동하는 신뢰성 있는 이중펄스 추진기관을 개발하기 위해서는 안정적인 진공 점화 기술과 펄스분리장치(PSD, Pulse Separation Device) 설계기술이 요구된다. 본 연구에서는 이중펄스 추진기관 격막형 펄스분리장치(Membrane Type Pulse Separation Device)의 파열압력 분석기법을 개발하였다. 변형률-압력 관계를 이용하여 PSD 파열압력에 대한 관계식을 도출하였다. 고고도 진공환경을 모사할 수 있는 PSD 진공파열 시험장치와 PSD 1초급 진공점화 시험장치를 개발하였다. PSD 진공파열시험을 수행하여 파열압력을 분석하고 PSD 설계 값을 도출하였다. 최종적으로 PSD 1초급 진공점화 시험을 통해 이중펄스 추진기관의 PSD 설계 파열압력과 추진제 진공점화 성능을 확인하였다.

• 한국항공우주학회지
• /
• 제31권7호
• /
• pp.94-99
• /
• 2003

액체로켓엔진의 연소 안정성 평가를 위한 압력 교란 장치인 펄스건은 내재된 화약 폭발시 충격파를 유도관을 통해 엔진 연소기 내부로 전달 발생시키게 된다. 본 연구에서는 펄스건 특성에 영향을 주는 여러 가지 인자 중 화약 충진량에 의한 충격파 특성 파악을 위해 KSR-III 주 엔진과 같은 직경 크기를 갖는 모사 챕버를 이용하였다. 펄스건 출구에서 발생하는 충격파는 축대칭의 균일한 형상의 세기를 지니고 있으며 전체적인 세기 분포는 챔버 내의 압력에 따라 변화함을 확인하였다. 펄스건의 충격파는 상온 상태 조건에서 챔버내의 공명 주파수를 가진하는 것으로 보아 실제 연소장에서도 충분한 압력 교란을 제공할 수 있을 것으로 보인다. 가장 중요한 점은 펄스건에 의해 발생하는 초기 압력 최대 값이 화약 충진량의 크기에 비례하는 경향을 보인다는 것이다.

• 한국대기환경학회지
• /
• 제10권3호
• /
• pp.183-190
• /
• 1994

Performance of domestic glass fabrics was tested in a Pulse- jet cleaned fabric filter under simulated coal combustion. Pulse Pressure were 2.5, 4.0kgf/$\textrm{cm}^2$ and pulse air nozzle diameter were 4.0, 6.0mm Pressure drop and penetration turned out to be low at small pulse air nozzle diameter and low pulse air pressure. Fractional penetration through the dust cake and fabric at face velocity of 1.7m/min was higher than that at face velocity of 1.0m/min. As a consequense, the performance of domestic glass fabrics was better with face velocity of less than 1.0m/min, pulse air pressure of 2.5 kgf/$\textrm{cm}^2$ and pusle air nozzle diameter of 4.0mm.

• 설비공학논문집
• /
• 제16권4호
• /
• pp.390-396
• /
• 2004

A double-inlet pulse tube refrigerator was fabricated as a U-shape with $\Phi$19.0 mm${\times}$125 mm regenerator packed by #200 stainless steel mesh and $\Phi$12.7 mm${\times}$125 mm pulse tube. A pressure sensor was installed at the inlet of the regenerator and a differential pressure sensor was installed across the bypass. Amplitude of the pulsating pressure was independent of the opening of the orifice and the bypass valves. Helium flow through the orifice and the bypass was calculated based on the measured pressure. Energy loss through the orifice and the bypass was evaluated with the measured pressure and the calculated helium flow rate. The energy loss, which is equivalent to the refrigeration capacity at the cold end of the ideal pulse tube refrigerator, was mainly generated through the orifice. It was proportional to the opening of the orifice valve, but the real refrigerator displayed the best performance at the optimized opening of the orifice valve. This optimized performance of the tested pulse tube refrigerator can be explained by additional refrigeration losses. As an example, the shuttle heat transfer loss of the pulse tube was calculated from the measured experimental data.

• Journal of Korean Biological Nursing Science
• /
• 제5권2호
• /
• pp.31-39
• /
• 2003

The purpose of this study was to test the effect of guided imagery on blood pressure and pulse rate. The subjects were thirty-nine nursing students in I university located in Busan, Korea To enhance the effect of treatment, they were trained getting themselves absorbed in guided imagery on three different occasions before the study. Actually in the study, the subjects were given instruction in Mason's guided imagery for 19 minutes and 58 seconds. Blood pressure and pulse rate were measured before and after guided imagery application. The data were analyzed through paired t-test. The Results were as follows : 1) There was a significant decrease in systolic blood pressure after the use of guided imagery. 2) There was no significant decrease in diastolic blood pressure after the use of guided imagery. 3) There was a significant decrease in pulse rate after the use of guided imagery. These results indicate that guided imagery is a helpful technique for decreasing blood pressure and pulse rate, which are increased in stress condition.

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.204-209
• /
• 2014

본 논문은 맥파전달현상을 유지하며 맥압을 조절할 수 있는 시뮬레이터를 제작하는 것이 목적이다. 이를 위해 탄성튜브와 컴플라이언스 챔버를 융합하였다. 본 시뮬레이터는 슬라이더-크랭크로 구성된 압력발생부, 저항조절부를 포함한 혈관부, 수조 그리고 측정부로 구성되어있다. 챔버의 위치선정을 위해 챔버의 위치에 따른 맥파의 변화를 실험하였다. 또한 챔버가 맥압에 미치는 영향을 보기 위해 챔버의 유무에 따른 맥압의 변화를 비교하였다. 챔버의 유무가 맥파전달현상에 미치는 영향을 조사하였다. 실험결과, 튜브의 상류지점에 챔버를 설치할 때가 하류지점에 설치할 때 보다 인체와 더 유사한 압력파형을 나타냈다. 챔버를 설치하였을 때가 설치하지 않았을 때보다 인체와 유사한 맥압을 생성하였다. 챔버의 설치여부에 따른 맥파 전달 속도는 큰 변화가 없었다.

• 대한한방부인과학회지
• /
• 제26권1호
• /
• pp.82-91
• /
• 2013

Objectives: The purpose of this study is to find out the patterns of teenage girls who is easy to suffer from Menstrual Disorders. Methods: The data from the 1681 participants were collected using a structured menstrual history questionnaire. Based on the survey responses, we had 97 adolescents with menstrual disorder as the test group and 97 adolescents without menstrual disorder as the control group. The clinical trials subjects were asked to respond to another questionnaire for identifying Blood Pressure Pulse Analyzer tests. We identified significant variables for dysmenorrhea from comparison between the test and control group; a binary response variable from the test group's responses for ever experiencing dysmenorrhea and explanatory variables from Blood Pressure Pulse Analyzer. Results: The reselts of Blood Pressure Pulse Analyzer test showed that the score of Energ_R, EIX_R were lower in dysmenorrhea group than the control group. The reselts of Blood Pressure Pulse Analyzer test showed that the score of Energ_R, EIX_R were lower, and T4_R were higher in hypomenorrhea group than the control group. The reselts of Blood Pressure Pulse Analyzer test showed that the score of Energ_R, EIX_R were lower in Irregular Menstruation group than the control group. Conclusions: Blood Pressure Pulse Analyzer test showed that the score of Energ_R, EIX_R were lower in the test group than the control group.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1997-1998
• /
• 2008

Pulse diagnosis is the one of the most important diagnostic process to traditional medical doctors. Although the pulse diagnosis position, Gwan is apart from Chon or Cheok by 10$\sim$20mm at most, traditional medical doctors applies different indent pressures and even they states different pulse images are felt at Chon, Gwan and Cheok. One the other hand, the education on pulse diagnosis behavior includes tantalizing problem caused by no tool for communication between trainer and trainee. On account of this situation, we tried to develop a system which can measure the hold-down pressure during a pulse diagnosis and compare the hold-down pressure profile of trainer and that of trainee. This system can be divided into three parts - pulse pressure sensing part, signal acquisition part and data storing part. A correction curve was generated by the relation between output voltages and standard weights. Using this system, 3 channel hold-down pressure profile of a oriental medical doctor were recorded three times. In the profile, three period were observed and all period included two process for searching the depth of pulsation and for classifying the pulse feeling into one or more of 28 pulse types. The maximum value of pulse profile was 1.3$kg{\cdot}f$ which was more than reported by previous chinese groups and the mean values of three channel ranged from 240$g{\cdot}f$ to 430$g{\cdot}f$. In frequency domain, each channel has some dominant frequency components - about 10Hz, 35Hz and 75Hz. In further study, we want to collect more profiles from lage number of oriental medicine doctors and hope to develop a measuring system which can measure the hold-down pressure on subject's skin directly.

• 한국산업보건학회지
• /
• 제18권2호
• /
• pp.149-160
• /
• 2008

Bag-filter system has been widely used in industrial field to remove the particulate matters from the exhaust gas. The cylindrical type of bag-filter has been generally used. But it has many shortcomings. The reattachment of separated particles on the surface of bags could result in high pressure drop of bag-filter system and subsequent decrease of air flow rate since the cylindrical type bag-filter system should have the upward flow pattern. In addition, the supply of very high pressure pulse air jet to remove particulate matters on the surface of filter could result in a frequent rupture of bags. To overcome these shortcomings of the cylindrical type, the rectangular type was developed in the developed countries and imported to Korea. But, there was not many design data available to understand the mechanisms. Thus, the fundamental experiments were conducted in this study to get some ideas about the pulse jet cleaning of rectangular type bag filter system. The experimental factors are as follows; pulse distance, pulse duration, pulse interval, pulse pressure and pulse nozzle type. Experiments followed the factorial design method. With the shorter pulse distance, the distribution of pressure drops was relatively not uniform while the particulate removal efficiency was higher. With the longer duration of pulsing and the more number of pulse nozzle, the removal efficiency was higher and the pressure drop distribution was more uniform.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.243-248
• /
• 2001

A radial artery pulse wave is well known as a good mans to diagnose human body condition in th field of Chinese medical science. Information about constitution as well as organs can be obtained by detecting the artery pulse wave. Recently, the information about the human body constitution may be utilized in accelerating the recovery process of the patient on the basis of comprehensive diagnosis. A radial artery pulse wave is considered as one of promising means in examining the human body constitution. Since the examination has been conducted by the feeling of finger, the diagnosis may occasionally have uncertainty or fatal error. In this paper, a new measuring system is suggested and developed to examine the pattern of a pulse wave correctly. The system is composed of four pressure vessels, pressure sensors and air supplying pumps. One of them is utilized for appropriately pressing the radial artery, three of them for detecting pressure change in several mmHg level. The detected data is shown and discussed.