• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2137-2139
• /
• 2004

Cancer cell lysis at pulsed DC is realized using micromachined electrodes. In this research, quantitative analyses are performed on cell lysis results. The cell volume increasing at the pulses applied are analyzed in different medium conditions on osmotic pressure and conductivity, and the cell lysis procedures are studied in detail experimentally. Phosphate buffered saline (PBS) is used as the medium. To change the conductivity of PBS, NaCl concentration of PBS is adjusted, and inositol is used with PBS to control the effects of the osmotic pressure to cell lysis performance.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.609-614
• /
• 2009

A fuel-cell power system among various alternative power sources has many advantages such as comparatively independable circumstances, high-efficient, and heat-recyclable, thus it is now able to be up to hundreds MWh-scaled through improving feasibility and longevity of it. During the last few decades, numerous research results has been investigated to expand interest in fuel-cell technology. This study presents pressure distribution on the geometrical manifold structures, which are U-type and Z-type, of a planar-type fuel-cell stack by simulated with computational fluid dynamics(CFD). Then, electrical performance of a 200W fuel-cell stack, which is U-type, was diagnosed after pre-conditioning operation. The stack has electrical characteristics ; 22V, 10A, 220W, and current density $200mA/cm^2$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3224-3229
• /
• 2007

This study aims to analyse the influence of steam injection on the performance of hybrid systems combining a solid oxide fuel cell and a gas turbine. The steam is generated by recovering heat from the exhaust gas. Two system configurations, with difference being the operating pressure of the SOFC, are examined and effects of steam injection on performances of the two systems are compared. Two representative gas turbine pressure ratios are simulated and a wide range of both the fuel cell temperature and the turbine inlet temperature is examined. Without steam injection, the pressurized system generally exhibits better system efficiency than the ambient pressure system. Steam injection increases system power capacity for all design cases. However, its effect on system efficiency varies much depending on design conditions. The pressurized system hardly takes advantage of the steam injection in terms of the system efficiency. On the other hand, steam injection contributes to the efficiency improvement of the ambient pressure system in some design conditions. A higher pressure ratio provides a better chance of efficiency increase due to steam injection.

• 대한화학회지
• /
• 제18권5호
• /
• pp.320-328
• /
• 1974

종래의 방법으로 고압하에서 전지의 표준기전력 $(E^{\circ})$를 산출하는 것은 불가능하다. 그러나 완전평형상수의 개념을 종래의 Nernst 방정식에 적용하므로서 고압하에서 표준기전력을 구할 수 있게 되었다(완전 Nernst방정식). 더욱이 다른 열역학적 성질 이를테면 수화수의 순변화(k), 용매의 압축을(${\beta}$), 전지반응에서 종래의 해리상수(K) 평형상태에서 표준자유에너지변화(${\Delta}G^{\circ}$) 표준엔탈피변화(${\Delta}H^{\circ}$) 및 표준엔트로피변화($S^{\circ}$) 등을 얻었다. 본 실험에서는 전지의 기전력(E)을 $20{\sim}35^{\circ}C$와 1∼2500 atms 범위에서 측정하였다. 일정한 온도에서 전지의 기전력은 압력이 증가함에 따라 증가하였으며, 일정한 압력에서 온도가 증가함에 따라 역시 증가하였다. 전지반응의 수화수의 순변화(k)는 $20^{\circ}C$에서 41.96으로서 압력에 따라 변하지 않고 일정한 값을 유지하였으나 한편 K와 ${\Delta}S^{\circ}C$는 압력에 따라 증가하였으나 ${\Delta}G^{\circ}$와 ${\Delta}H^{\circ}$는 감소하였다. 고압하에서도 완전 Nernst방정식으로부터 표준기전력을 계산할 수 있으므로 상압에서와 마찬가지로 화학평형론을 취급할 수 있게 되었다

• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.499-504
• /
• 2009

The effect of gas diffusion layer (GDL) compression caused by different stack clamping pressures on fuel cell performance was experimentally studied in a miniature 5-cell proton exchange membrane fuel cell (PEMFC) stack. Three stacks with different GDL compressions, 15%, 35% and 50%, were prepared using SGL 10BC carbon fiber felt GDL and Gore 57 series MEA. The PEMFC stack performance and the stack stability were enhanced with increasing stack clamping pressure resulting in the best performance and stability for the stack with higher GDL compressions up to 50%. The excellent performance of the stack with high GDL compression was mainly due to the reduced contact resistance between GDL and bipolar plate in the stack, while reduced gas permeability of the excessively compressed GDL in the stack hardly affected the stack performance. The high stack clamping pressure also resulted in excessive GDL compression under the rib areas of bipolar plate and large GDL intrusion into the channels of the plate, which reduced the by-pass flow in the channels and increase gas pressure drop in the stack. It seems that these phenomena in the highly compressed stack enhance the water management in the stack and lead to the high stack stability.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.572-575
• /
• 2008

Flow-field design has much influence over the performance of proton exchange membrane fuel cell (PEMFC) because it affects the pressure magnitude and distribution of the reactant gases. To obtain the pressure magnitude and distribution of reactant gases in four kinds of flow-field designs without additional measurement equipment, computational fluid dynamics (CFD) analysis was performed. After the CFD analysis, the performance values of PEMFC according to the flow-field configurations were measured via a single cell test. As expected, the pressure differences due to different flow-field configurations were related to the PEMFC performance because the actual performance results showed the same tendency as the results of the CFD analysis. A large pressure drop resulted in high PEMFC performance. So, the single serpentine configuration gave the highest performance. On the other hand, the parallel flow-field configuration gave the lowest performance because the pressure difference between inlet and outlet was the lowest.

• 한국약용작물학회지
• /
• 제15권6호
• /
• pp.398-404
• /
• 2007

본고에서는 초고압 추출 공정의 활성 증진 효과를 알아보기 위해 복분자의 면역활성 실험을 실시하였는데 그 결과는 아래와 같다. 인간의 정상 신장세포인 HEK293을 이용한 세포 독성은 추출물은 1.0 $mg/m{\ell}$의 농도에서 최고 19.5%의 세포독성을 나타냈다. 항암활성은 AGS와 A549 암세포를 이용하였는데, 초고압을 실시할 경우 1.0 $mg/m{\ell}$의 농도에서 80%이상의 높은 억제활성을 보였으며, 암세포의 생육활성에 대한 정상 세포의 세포독성의 비로 나타낸 선택적 사멸도는 모든 고농도에서 모두 3 이상으로 나타났다. 모든 처리구 중 15분간 초고압 추출한 것이 가장 높은 활성을 보였으나 5분간 초고압 추출한 것과 큰 차이가 나지 않아 5분간 초고압 추출을 실시하는 것이 효율적인 것으로 보인다. B cell과 T cell을 이용한 면역세포의 생육은 배양 6일째에 15분간 초고압으로 추출한 처리구에서 각각 $13.5{\times}10^4cells/m{\ell}$, $14.6{\times}10^4cells/m{\ell}$로 가장 높은 세포농도를 나타냈다. 면역세포를 이용한 cytokin의 분비량 측정실험에서는 HPE15 추출물이 배양 시간에 따른 cytokine의 분비가 가장 높게 나타나는 것을 확인할 수 있었다. 각 세포의 $TNF-{\alpha}$와 IL-6의 분비량은 6일째 최고의 분비량을 나타내었다. 또한 NK cell의 면역활성은 모든 추출물에서 배양 시간에 따라 유의적으로 증가하는 것을 확인하였다. 그 중 HPE15 추출물에서 B cell의 경우 $15.8{\times}10^4cells/m{\ell}$, T cell의 경우 $14.8{\times}10^4cells/m{\ell}$으로 가장 높은 생육 활성을 나타내었다. 본 실험 결과를 통하여 초고압으로 인해 기존의 추출 방법으로는 추출되지 않았던 유용생리활성 물질들이 초고압으로 조직과 세포막 파괴로 인해 유용성분의 용출량이 증가하고 새로운 물질의 용출로 인해 높은 활성을 나타낸 것으로 판단되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.643-646
• /
• 2002

Experimental study was conducted to reveal the flow mechanism under rotating stall in an axial flow fan. For this study unsteady pressure was measured using high frequency pressure transducers mounted on the casing wall of rotor passage and total pressure fields were measured at the rotor upstream and downstream. The measured pressure signal was analyzed by Wavelet Transform and Double Phase Locked Averaging Technique. From the result of unsteady pressure field of the casing wall, one period of rotating stall was divided into three zones and the flow characteristics on each zone were described in detail. The pressure field was also analyzed in terms of the pressure distribution along pressure side and suction side of blade tip. From the result of total pressure fields at inlet and outlet of the rotor, the useful information on the characteristics of the stall cell in radial direction was provided.

• 멤브레인
• /
• 제14권3호
• /
• pp.192-200
• /
• 2004

본 연구에서는 유기질막에 비해 안정성이 우수하고 사용수명이 긴 세라믹 막을 이용하여 혐기성 Lactobacillus 균주의 농축에 관해서 연구하였다. Cell harvesting (CH)에 영향을 주는 인자로 막투과 압력, 온도, 선속도 등에 대해 조사하였으며 세라믹 막을 이용하여 농축율 변화에 따른 플럭스와 TMP (transmembrane pressure)의 변화, 일정 VCF(volumetric concentration factor)에서 TMP변화 등의 최적조건에 관해 알아보았다. 그 결과 플럭스는 TMP, 선속도, VCF가 증가함에 따라 투과수량도 증가함을 알 수 있었다. 온도가 증가할수록 점도에 의해 초기 플럭스도 증가하지만 시간이 경과함에 따라 막 표면의 겔층의 형성으로 온도의 영향은 미미하였다. 또한 농축비 이하의 일정한 VCF에서 운전할 경우 플럭스가 안정적임을 알 수 있었다. 선속도 5 m/s, 공급액의 온도 $37^{\circ}C$, TMP 1 bar에서 6∼8 h 운전할 경우 PS 406 원액의 생균수는 4.9{\times}10^9$으로 약 8배 농축됨을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.151-159
• /
• 2006

A one-dimensional numerical analysis is carried out to investigate the effects of inlet gas humidities, inlet gas pressures, and thicknesses of membrane on the performance of a proton exchange membrane fuel cell. It is found that the relative humidity of inlet gases at anode and cathode sides has a significant effect on the fuel cell performance. Especially, the desirable fuel cell performance occurs at low relative humidity of the cathode side and at high humidity of the anode side. In addition, an increase in the pressure ranging from 1 atm to 4 atm at the cathode side results in a significant improvement in the fuel cell performance due to the convection effect by a pressure gradient toward the anode side, and with decreasing the thickness of membrane, the fuel cell performance is enhanced reasonably.