Search | Korea Science

김상섭;이온영;이철규;전병세
- Journal of the Korean Ceramic Society
- /
- v.31 no.4
- /
- pp.407-414
- /
- 1994
Compacts were prepared using the SHS(Self-propagating High-temperature Synthesis) method and nitrided at temperatures range from 145$0^{\circ}C$ to 175$0^{\circ}C$, and pressed at 180$0^{\circ}C$ under N2 atmosphere. The samples were characterized for bulk density, porosity, pore size and distribution, phase composition, microstructure and fracture toughness. Compacts were composed of whiskers, which showed a good candidate for the composite materials. The major phases of the compacts nitrided at 175$0^{\circ}C$ and pressed at 180$0^{\circ}C$ were 15R-sialon with a large aspect ratio.
PDF

최현주;안정욱;임대순;박동수
- Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
- /
- 2000.11a
- /
- pp.304-309
- /
- 2000
Si$_3$N$_4$-6wt%Y$_2$O$_3$-lwt%Al$_2$O$_3$was prepared by hot pressed and gas pressure sintering to investigate the effect of microstructure on erosion behaviors. Hardness and fracture toughness were measured with prepared specimens to study the high temperature erosion properties. A gas blast type erosion tester was used In examine erosion behavior of the specimens up to 700$^{\circ}C$. In case of GPS silicon nitride, the erosion rate increases up to 500$^{\circ}C$ and decreases over 500$^{\circ}C$. Maximum erosion rate was observed at 300$^{\circ}C$ for HP silicon nitride. The principal factors affecting the high temperature erosive wear of brittle materials are largely dependent on high temperature properties of grain boundaries.
PDF

;H. J. Al-Kanani
- Transactions of Materials Processing
- /
- v.10 no.1
- /
- pp.30-34
- /
- 2001
The magnetic and metallurgical characteristics of Mischmetal(MM) -Ferroboron (FeB) Permanent magnets have been investigated by X-ray diffractometer, scanning and transmission electron microscope and vibrating sample magnetometer under hot-pressing and die-upsetting process. The best magnetic properties obtained in these studies were $H_c$=5.8 kOe, $B_r$=5.0 kG with $(BH)_{max}=7.6 MGOe for melt-spun ribbons, $H_c$=3.0 kOe, $B_r$=4.6 kG with $(BH)_{max}$=2.9 MGOe for hot-pressed magnets and $H_c$=1.8 kOe, $B_r$=5.5 kG with $(BH)_{max}$=4.1 MGOe for die-upset magnets. The higher magnetic properties in die-upset magnets were resulted from alignment of the c-axis along the die-upsetting direction.
PDF

Oh, Yun-Jeong;Choi, Yong-Jin;Noh, Eun-Young;Park, Geol;Oh, Won-Mann;Hwang, In-Nam
- Proceedings of the KACD Conference
- /
- 2003.11a
- /
- pp.610-610
- /
- 2003
The purpose of this study was to propose a new dental color system through color evaluation of generally used dental composite and porcelain. In this study, Vita Omega 900 dental porcelain and 10 kinds of composite resins were used. A disk specimens(15mm diameter, 4mm thickness) of each material/shade combination were made. Resin compasite was condensed into Teflon mold and pressed between glass plates to flatten the surface. Pressed compasite was polymerized using an Optilux 501(Demetron, USA) for 200 seconds of each side.(중략)
PDF