• Structural Engineering and Mechanics
• /
• v.50 no.5
• /
• pp.589-603
• /
• 2014

Expressions for determining the value of the impact force as reported in the literature and incorporated into code provisions are essentially quasi-static forces for emulating deflection. Quasi-static forces are not to be confused with contact force which is generated in the vicinity of the point of contact between the impactor and target, and contact force is responsible for damage featuring perforation and denting. The distinction between the two types of forces in the context of impact actions is not widely understood and few guidelines have been developed for their estimation. The value of the contact force can be many times higher than that of the quasi-static force and lasts for a matter of a few milli-seconds whereas the deflection of the target can evolve over a much longer time span. The stiffer the impactor the shorter the period of time to deliver the impulsive action onto the target and consequently the higher the peak value of the contact force. This phenomenon is not taken into account by any contemporary codified method of modelling impact actions which are mostly based on the considerations of momentum and energy principles. Computer software such as LS-DYNA has the capability of predicting contact force but the dynamic stiffness parameters of the impactor material which is required for input into the program has not been documented for debris materials. The alternative, direct, approach for an accurate evaluation of the damage potential of an impact scenario is by physical experimentation. However, it can be difficult to extrapolate observations from laboratory testings to behaviour in real scenarios when the underlying principles have not been established. Contact force is also difficult to measure. Thus, the amount of useful information that can be retrieved from isolated impact experiments to guide design and to quantify risk is very limited. In this paper, practical methods for estimating the amount of contact force that can be generated by the impact of a fallen debris object are introduced along with the governing principles. An experimental-calibration procedure forming part of the assessment procedure has also been verified.

• Geomechanics and Engineering
• /
• v.24 no.2
• /
• pp.115-127
• /
• 2021

This paper investigates the effects of soaking on a lime stabilized high plasticity clay and evaluates the implications for pavement design. In this context, the soil was stabilized by 4%, 6% and 9% hydrated lime. The soil was pulverized in two different gradations so that representative field gradations could be simulated. Both soil pulverization levels passed the relevant field gradation criteria. Curing durations were chosen as 7 days, 28 days and 56 days. Two groups of samples were prepared and were tested in unconfined compression test apparatus to measure the strength and secant modulus at failure values. One of the groups was tested immediately after curing. The other group of samples were first cured and then subjected to soaking for ten days before testing. Visual observations were made on the samples during the soaking period. The results showed the superiority of fine soil pulverization over coarse soil pulverization for unsoaked conditions in terms of strength and modulus values. Soaking of the samples affected the unconfined compressive strength and modulus values based on lime content, curing duration and soil pulverization level. In soaked samples, fine soil pulverization resulted in higher strength and modulus values compared to coarse soil pulverization. However, even with fine soil pulverization, effects of soaking on modulus values were more significant. A new term named as "Soaking Influence Factor (SIF)" was defined to compare the reduction in strength and modulus due to soaking. The data was compared with the relevant design guidelines and an attempt was made to include Soaking Influence Factors for strength and modulus (SIFS and SIFM) into pavement design processes. Two equations which correlated secant modulus at failure to unconfined compressive strength were proposed based on the samples subjected to soaking. The results of this study showed that in order to decrease the diverse effects of soaking for lime stabilized soils, soil pulverization level should be kept as fine as possible in the field. Importance of proper drainage precautions in the pavements is highlighted for better performance of the pavements.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.6
• /
• pp.421-427
• /
• 2020

Morus alba, Anti-obesity, C57BL/6 Mice, Expression, Flavonoid, Gene, Mulberry Background: The seed oil of Zanthoxylum schinifolium S. et Z. (sancho) is a traditional cooking oil that has long been sold at a very high price however, depending on the method of extraction and storage, this oil becomes rancid occurs very quickly. Therefore, this study aimed to find a material that prevents rancidity and improves the storage properties of sancho oil. Methods and Results: Sancho oil was extracted using an extraction press, and acid values were compared with commercially available vegetable oils, sancho oil had a higher acid value than other vegetable oils. A very high acid value was observed in sancho oil stored for 6 months, regardless of temperature, requiring an effective storage method. The high acid value and the decrease in turbidity of sancho oil are dependent on the days of sedimentation. Treatment with sodium bicarbonate by concentration resulted in minimal changes in acid value over time. However, minor differences were detected among the treatment concentrations. Ascorbic acid was added to maximize the effect of sodium bicarbonate, and it was observed that ascorbic acid did not improve the antioxidant effect. The sodium bicarbonate and ascorbic acid mixture resulted in minimal change in acid value at temperature up to 25℃. Conclusions: Sancho oil becomes rancid very quicky and requires efficient storage techniques. Sodium bicarbonate and ascorbic acid have been proven to be useful as safe anti-racidity agents without causing harm to humans.

• 한국사회정책
• /
• v.24 no.2
• /
• pp.157-179
• /
• 2017

In Korea, 'spoon class discourse' has attracted public attention in the press and among young people, which reflects that mass awareness that the class status structure is clearly rooted in the society becomes widespread. Although income distribution has been improved since late 2000s, it is interesting that Korean people's subjective perception concerning class mobility and social justice has been worsemed. By using the survey data on people's perception of opportunity inequality, this study finds that Korean people have by and large negative subjective awareness regarding socio-economic opportunity inequality, magnitude of opportunity inequality, and achievement by efforts, and that the degree of the negative perception is greater in accordance with the people's subjective identification. The regression analysis reveals that the social status of respondents and their parents(-), experience of discrimination(+), age(-), and high education of college and above (+) have consistent effect over socio-economic opportunity inequality, magnitude of opportunity inequality, and achievement by efforts with statistical significance. More concretely, as people have lower subjective status identification at the time of parent generation and their own generation, as they have the experience of discriminatory misconduct, and as they are young and highly educated, they have negative or pessimistic perception regarding opportuinity inequality. In addition, it is revealed that the unemployed and non-regular workers have significantly negative perception on socio-economic opportunity inequality, magnitude of opportunity inequality, while negative perception on the magnitude of opportunity inequality and achievement by efforts is noticeable among high and middle income households.

• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.466-479
• /
• 2021

Fake news is flooded with fake news that mixes untrue falsehoods in whole or in part. In order to create a frame for political and social purposes, news is mainly created by combining facts with fakes, or news is created for the purpose of incitement to encourage distortion and hatred. In particular, some media, including over-the-air broadcasting, are expressing their political bias in a specific direction without hesitation. Even if the press has political bias, if it is based on the delivery of facts, a trusted media environment can be achieved under the mutual checks of conservatives and progressives. The May 18 Democratic Uprising is a painful history and fact of modern history, leaving remuneration and progress. Nevertheless, there is still a view that the May 18 Democratic Uprising is regarded as 'democracy movement' and 'violence'. This study analyzed how the conservative JoongAng Ilbo and the progressive Kyunghyang Shinmun Manpyeong deal with the May 18 Democratic Uprising. The Manpyeong of the two newspapers differs greatly from the viewpoint of the May 18 Democratic Uprising. The liberal tendency of the Kyunghyang Shinmun Manpyeong has great significance in that it reveals the essence of the event and satirizes the subject. On the other hand, the conservative JoongAng Ilbo Manpyeong cannot approach the nature of the case or the object of satire due to ambiguity.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.415-431
• /
• 2022

Secondary flows have a huge impact on losses generation in modern low pressure gas turbines (LPTs). At design point, the interaction of the blade profile with the end-wall boundary layer is responsible for up to 40% of total losses. Therefore, predicting accurately the end-wall flow field in a LPT is extremely important in the industrial design phase. Since the inlet boundary layer profile is one of the factors which most affects the evolution of secondary flows, the first main objective of the present work is to investigate the impact of two different inlet conditions on the end-wall flow field of the T106A, a well known LPT cascade. The first condition, labeled in the paper as C1, is represented by uniform conditions at the inlet plane and the second, C2, by a flow characterized by a defined inlet boundary layer profile. The code used for the simulations is based on the Discontinuous Galerkin (DG) formulation and solves the Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Spalart Allmaras turbulence model. Secondly, this work aims at estimating the influence of viscosity and turbulence on the T106A end-wall flow field. In order to do so, RANS results are compared with those obtained from an inviscid simulation with a prescribed inlet total pressure profile, which mimics a boundary layer. A comparison between C1 and C2 results highlights an influence of secondary flows on the flow field up to a significant distance from the end-wall. In particular, the C2 end-wall flow field appears to be characterized by greater over turning and under turning angles and higher total pressure losses. Furthermore, the C2 simulated flow field shows good agreement with experimental and numerical data available in literature. The C2 and inviscid Euler computed flow fields, although globally comparable, present evident differences. The cascade passage simulated with inviscid flow is mainly dominated by a single large and homogeneous vortex structure, less stretched in the spanwise direction and closer to the end-wall than vortical structures computed by compressible flow simulation. It is reasonable, then, asserting that for the chosen test case a great part of the secondary flows details is strongly dependent on viscous phenomena and turbulence.

• Journal of Platform Technology
• /
• v.11 no.3
• /
• pp.83-97
• /
• 2023

This research aims to identify startup trends by analyzing a large number of news articles through semantic network analysis. Using the BIGKinds article analysis service provided by the Korea Press Foundation, 330,628 news articles from 19 newspapers from January 2013 to December 2022 were comprehensively analyzed. The study focused on exploring the changes in key issues over the past decade, considering the impact of the social environment and global economic trends on entrepreneurship. We compared the number of news articles and changes in issues before and after the COVID-19 pandemic, and visualized entrepreneurship trends through frequency analysis, relationship analysis, and correlation analysis. The results of the study showed that the top keywords for entrepreneurship-related words are startup activation and commercialization, and the correlation between COVID-19 and entrepreneurship keywords is almost negligible in a linear sense, but the number of news articles decreased during the pandemic, which has an impact. In particular, the most frequently mentioned keywords are Ministry of SMEs and Startups, place is the United States, and person is limited. The agency was the SBA, and the entrepreneurship sector is more affected by social issues than any other sector, with the important characteristics of increased frequency of prompt access. This study supplies essential basic data for understanding and exploring issues and events related to entrepreneurship and suggests future research topics in the field.

• Membrane and Water Treatment
• /
• v.14 no.2
• /
• pp.65-76
• /
• 2023

Given the limited water resources and the presence of multiple decision makers with different and usually conflicting objectives in the exploitation of water resources systems, especially dam's reservoirs; therefore, the decision to determine the optimal allocation of reservoir water among decision-makers and stakeholders is a difficult task. In this study, by combining a fuzzy VIKOR technique or fuzzy multi-criteria decision making (FMCDM) and the Young's bilateral bargaining model, a new method was developed to determine the optimal quantitative and qualitative water allocation of dam's reservoir water with the aim of increasing the utility of decision makers and stakeholders and reducing the conflicts among them. In this study, by identifying the stakeholders involved in the exploitation of the dam reservoir and determining their utility, the optimal points on trade-off curve with quantitative and qualitative objectives presented by Mojarabi et al. (2019) were ranked based on the quantitative and qualitative criteria, and economic, social and environmental factors using the fuzzy VIKOR technique. In the proposed method, the weights of the criteria were determined by each decision maker using the entropy method. The results of a fuzzy decision-making method demonstrated that the Young's bilateral bargaining model was developed to determine the point agreed between the decisions makers on the trade-off curve. In the proposed method, (a) the opinions of decision makers and stakeholders were considered according to different criteria in the exploitation of the dam reservoir, (b) because the decision makers considered the different factors in addition to quantitative and qualitative criteria, they were willing to participate in bargaining and reconsider their ideals, (c) due to the use of a fuzzy-logic based decision-making approach and considering different criteria, the utility of all decision makers was close to each other and the scope of bargaining became smaller, leading to an increase in the possibility of reaching an agreement in a shorter time period using game theory and (d) all qualitative judgments without considering explicitness of the decision makers were applied to the model using the fuzzy logic. The results of using the proposed method for the optimal exploitation of Iran's 15-Khordad dam reservoir over a 30-year period (1968-1997) showed the possibility of the agreement on the water allocation of the monthly total dissolved solids (TDS)=1,490 mg/L considering the different factors based on the opinions of decision makers and reducing conflicts among them.

• Journal of dental hygiene science
• /
• v.23 no.4
• /
• pp.320-329
• /
• 2023

Background: Oral frailty has garnered considerable interest following its identification as a risk factor for physical frailty. The Korean oral frailty diagnosis criteria have emphasized the need for extensive research on oral frailty diagnostic items and interventions. Our study performed an in-depth analysis of the tongue-palate pressure patterns in healthy community-dwelling older adults. Methods: Of the 217 older adults aged ≥60 years who visited a senior center in Wonju, 205 participants who completed tongue pressure measurement were included in the final analysis. Pressure changes over time were recorded by instructing the participants to press their tongue against the hard palate with for 7 seconds per cycle. The participants were divided into the normal and abnormal tongue pressure (NTP and ATP, respectively) groups based on whether they achieved the target tongue pressure at least once; tongue pressure patterns were compared between the groups. Furthermore, the average time taken to achieve the standard tongue pressure value was calculated for the participants in the NTP group and used to evaluate the decrease in tongue pressure in the ATP group. Results: Among the 205 participants, 40.5% had ATP. The tongue pressure graph revealed a gentle and consistent incline that was maintained even after achieving standard tongue pressure in the NTP group. The graph was more extreme in the ATP group, and the changes in the pressure type varied across individuals; the tongue pressure was only 48.4%, 40.7%, 31.9%, and 22.6% of the NTP in the participants in their 60s, 70s, 80s, and ≥90s, respectively (p<0.05). Conclusion: Tongue pressure weakness was observed in 40.5% of the healthy community-dwelling older adults. Furthermore, ATP graphs were observed in the patients with tongue pressure weakness. Thus, activities improving the oral function in community-dwelling older adults and systematic oral rehabilitation programs should be devised to promote normal swallowing.

• Advances in aircraft and spacecraft science
• /
• v.11 no.1
• /
• pp.83-103
• /
• 2024

Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.