• 대한지구과학교육학회지
• /
• 제3권1호
• /
• pp.55-64
• /
• 2010

This study was intended to survey and analyze the illustrations of Chinese elementary science textbooks. The analysis criterion was composed of two categories, the kind of illustration and the role of illustration. The kind of illustration was divided into six subcategories categories such as photograph, picture, illustration, cartoon, diagram and recording sheet. The role of illustration was divided into four subcategories such as motive induction, guidance for learning, the supply of learning material, the presentation of learning result. The findings of this study were as follows. Chinese elementary science textbooks have about 3.55 illustrations per page. Compared with Korean ones, Chinese ones have more illustrations. From the analysis of the kinds of the illustrations on grade basis, it was found that the order of percentage of illustrations of Chinese elementary science textbooks is photograph, cartoon et al.. Photograph is prominent in entire grade. And From the analysis of the kinds of the illustrations on domain basis, the same results was founded. From the analysis of the roles of the illustrations on grade basis showed that both supply of learning material and guidance for learning are dominant in entire grade. The role of supply of learning material is a little more major than that of guidance for learning. From the analysis of the roles of the illustrations on domain basis, it was found that in domain of physics and chemistry the role of guidance for learning is major, and in domain of biology and earth science the role of supply of learning material is major.

• 대한지구과학교육학회지
• /
• 제3권1호
• /
• pp.65-75
• /
• 2010

The purpose of this study is to present a Freedom Inquiry Method by Revised Science Curriculum in 2007. This study introduced IIM(Independent Inquiry Method), PBL(Problem Based Learning), Small Inquiry Method, Science Notebooks, Project Learning Method about Freedom Inquiry Method. The results of this study are as follows: First, IIM(Independent Inquiry Method) is studying method in the inquiry process center. The inquiry process is composed of total 9 phases, inquiry subject really it is, detailed aim deciding, information searching, it searches, quest result it arranges, aim evaluation, the report making, it announces, it evaluates, it is become accomplished. Second, It is a studying method which it starts with the problem which is Problem Based Learning, study atmosphere creation phase, problematic presentation phase and sleep static problem solving the phase which it attempts, it is become accomplished with autonomous studying phase, coordinated studying and discussion studying phase, discussion resultant announcement studying phase, arrangement and evaluation. Third, Small Inquiry Method, Call it accomplishes the call grade of the students among ourselves 4~8 people degree where only the quest learning capability is similar within class. Also interaction and coordinated function of the members between it leads and the subject which is given in the group it cooperates and it solves with it is a quest method which arrives to aim of commonness. This method divides on a large scale in three parts, it becomes accomplished in programming phase, quest accomplishment and resultant announcement. Fourth, Science Notebooks learns a scientific contents and a scientific quest function and the possibility of decreasing in order to be, from the fact that the help which it understands. This planing, data searching, it searches, becomes accomplished with resultant arrangement, announcement and evaluation. Fifth, The Project Learning Method the studying person oneself studying contents, it establishes a plan and it collects it accomplishes process of etc. it evaluates it leads and a subject and information and with real life it is a method which it studies naturally from the learning environment inside which is similar. This is preliminary phase, project start, project activity and project arrangement.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2010년도 한국우주과학회보 제19권1호
• /
• pp.30.3-31
• /
• 2010

We performed a comprehensive comparison between GPS Global Ionosphere Map (GIM) and TOPEX/Jason (T-J) TEC data for the periods of 1998~2009 in order to assess the performance of GIM over the global ocean where the GPS ground stations are very sparse. Using the GIM model constructed by CODE at University of Bern, the GIM TEC values were obtained along the T-J satellite orbit at the locations and times of the measurements and then binned into various geophysical conditions for direct comparison with the T-J TECs. On the whole, the GIM model was able to reproduce the spatial and temporal variations of the global ionosphere as well as the seasonal variations. However, the GIM model was not accurate enough to represent the well-known ionospheric structures such as the equatorial anomaly, the Weddell Sea Anomaly, and the longitudinal wave structure. Furthermore, there seems to be a fundamental limitation of the model showing the unexpected negative differences (i.e., GPS < T-J) in the northern high latitude and the southern middle and high latitude regions. The positive relative differences (i.e., GIM > T-J) at night represent the plasmaspheric contribution to GPS TEC, which is maximized, reaching up to 100% of the corresponding T-J TEC values in the early morning sector. In particular, the relative differences decreased with increasing solar activity and this may indicate that the plasmaspheric contribution to the maintenance of the nighttime ionosphere does not increase with solar activity, which is different from what we normally anticipate. Among these results, the plasmaspheric contribution to the ionospheric GPS TEC will be presented in this talk and the rest of it will presented in the companion paper (poster presentation).

• 한국콘텐츠학회논문지
• /
• 제8권2호
• /
• pp.132-139
• /
• 2008

본 논문은 인터넷상에서 건축설계 및 건축 재료에 대한 지식을 공유하고, 자신이 원하는 인테리어 디자인을 가상의 공간 안에 미리 설계해 봄으로써, 실제 시공 시 결과를 예측할 수 있도록 도와주는 건축설계 가상체험 사이트를 개발하고자 하는 목적을 가진다. 이를 위해 현재 건축분야에서 활용되고 있는 가상현실 기술의 사례조사를 통하여 건축설계에 있어서 구현 가능한 가상현실 기술의 한계 및 그 방향을 도출하고, 실제 전문가들이 사용하고 있는 건축설계 프로그램의 사례분석을 바탕으로 건축설계 시 요구되는 필수기능을 추출하여 UI(User Interface)로 구성하고자 하였다. 그 결과 웹 기반의 건축설계 가상체험 사이트의 설계 방향을 서비스적인 측면에서는 정보공유 및 커뮤니티의 제공을 제안하였으며, 기술적인 측면에서 게임엔진을 도입하여 가상체험에 현실감을 부여하고 다양한 엔터테인먼트 요소를 제공하고자 하였다. 또한 UI적인 측면에서는 초보자도 쉽게 디자인이 가능하도록 다양한 샘플을 제공하여 이를 통한 비즈니스 기회를 창출할 수 있도록 제안하고자 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.31-32
• /
• 2010

In our previous reports [1-3], electron transport for the switching and memory devices using alkyl thiol-tethered Ru-terpyridine complex compounds with metal-insulator-metal crossbar structure has been presented. On the other hand, among organic memory devices, a memory based on the OFET is attractive because of its nondestructive readout and single transistor applications. Several attempts at nonvolatile organic memories involve electrets, which are chargeable dielectrics. However, these devices still do not sufficiently satisfy the criteria demanded in order to compete with other types of memory devices, and the electrets are generally limited to polymer materials. Until now, there is no report on nonvolatile organic electrets using nano-interfaced organic monomer layer as a dielectric material even though the use of organic monomer materials become important for the development of molecularly interfaced memory and logic elements. Furthermore, to increase a retention time for the nonvolatile organic memory device as well as to understand an intrinsic memory property, a molecular design of the organic materials is also getting important issue. In this presentation, we report on the OFET memory device built on a silicon wafer and based on films of pentacene and a SiO2 gate insulator that are separated by organic molecules which act as a gate dielectric. We proposed push-pull organic molecules (PPOM) containing triarylamine asan electron donating group (EDG), thiophene as a spacer, and malononitrile as an electron withdrawing group (EWG). The PPOM were designed to control charge transport by differences of the dihedral angles induced by a steric hindrance effect of side chainswithin the molecules. Therefore, we expect that these PPOM with potential energy barrier can save the charges which are transported to the nano-interface between the semiconductor and organic molecules used as the dielectrics. Finally, we also expect that the charges can be contributed to the memory capacity of the memory OFET device.[4]

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.435-435
• /
• 2010

A inclined slot-excited plasma source is newly designed and constructed for higher flux HNB(Hyperthermal Neutral Beam) generation. The present source is different from the vertical SLAN(SLot ANtenna) sources [1] in two aspects. One is that the slots are inclined, and the other is that the magnetic field is configured to a cusp type. These modifications are intended to make the source plasma operated in sub-milli-torr pressure regime and as thin as possible, both of which is to get higher HNB flux by decreasing the re-ionization rate of the reflected atoms from the neutralizer [2]. The plasma is generated in a quartz tube of internal diameter 170 mm enclosed in a aluminum application chamber of larger diameter 250 mm. The microwave power is fed to the plasma chamber by 8 inclined slots cut into the application chamber wall. The slots are coupled the chamber to a WR280 waveguide wound around it to form a ring resonator. In order to make two slots $\lambda_g/2$ apart in phase, the adjacent slots are rotated in opposite directions. The rotation angle of the slots are set to $60^{\circ}$ from the chamber axis. Between the quartz chamber and the aluminum cylindrical chamber 8 NdFeB magnets are equally spaced and fixed to form the cusp magnetic field confinement and ECR (Electron Cyclotron Resonance) field. In this presentation, the magnetic and electromagnetic simulations, and the measured plasma parameters are given for both the inclined and the vertical slot-excited plasma sources. We also discuss how the sources can be tailored to suit better-performing HNB sources.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제5권6호
• /
• pp.816-833
• /
• 1999

스타일 정보를 중심으로 하는 기존의 워드 프로세서의 출력 문서들을 차세대 인터넷 문서인 XML문서방식에 따라서 표기하고 또한 제목, 초록, 장 및 단락 등과 같은 논리적인 구조를 반영할 수 있도록 구조화함으로써 문서들의 상호교환뿐만 아니라 인터넷에서 유효하게 사용할 수가 있다. 본 논문에서는 스타일 또는 표현 속성 중심으로 하는 다양한 문서의 평면 구조를 XML의 계층적인 논리적인 구조로, 또한 다양한 DTD(Document Type Definition)환경하에서 변경시킬 수가 있는 변환 스크립트 언어를 표현할 수 있도록 하기 위하여 XTML(XML Transformation Markup Language)을 DTD형식으로 정의하고 이를 이용하여 변환 스크립트를 작성하였으며 자동태깅에 적용하여 보았다.XTML은 그 인스턴스에 해당하는 변환 알고리즘의 효과적인 수행을 위하여 즉 기존의 XML문서를 효과적으로 다루기 위하여 문서를 GROVE라는 트리 구조로 만들어 저장하고 또한 이를 조작할 수 있는 기능 및 다양한 명령어 인터페이스를 제공하였다. Abstract Output documents of existing word processors based on style informations or presentation attributes can be structured by converting them into XML(Extensible Markup Language) documents based on hierarchically logical structures such as title, abstract, chapter and so on. If so, it can be very useful to interchange and manipulate documents under Internet environment. The conversion need the complicate process calling auto-tagging by which elements of output documents can be inferred from style informations and sequences of text etc, and which is different from various kinds of simple conversion.In this paper, we defined XTML(XML Transformation Markup Language) of DTD(Document Type Definition) form and also defined the script language as instances of its DTD for the auto-tagging. XTML and its DTD are represented in XML syntax.Especially XTML includes various functions and commands to generate tree structure named as "GROVE" and also to process, store and manipulate the GROVE in order to process efficiently XML documents.documents.

• Journal of Nutrition and Health
• /
• 제28권1호
• /
• pp.71-83
• /
• 1995

The purpose of the study was to develop generalized equations for estimating stature and weight for the nonambulatory elderly persons. Height weight recumbent knee height total ann length, midarm, waist and calf circumferences, triceps and subscapular skinfolds were measured from over 60 years old 315 ambulatory elderly. The equations to predict stature and weight were derived from participants in the validation sample and were applied to the participants in the cross-validation to test the accuracy and validity of equations. Stature and weight were significantly and negatively associated with age of women and similar patterns observed in men but associated to a slight degree. Knee height and total arm length were highly correlated with stature but the majority of the variances in stature was accounted for by knee height for both the men and women. In men, waist circumference was the most significantly correlated with weight and am, calf circumferences and so forth. But in women arm circumference was the highest then waist and calf circumference in order. The possible predictor variables to estimate of stature were knee height total arm length and age for both elderly men and women. Predictor variables to estimate of weight were recumbent measures of waist am, calf circumferences and knee height for both sexes. Inclusion of skinfold thickness measurements did not improve the prediction power of estimation for weight. When both equations developed from the present study and Chumlea's study were applied to cross-valida-tions samples, the equations derived from present study showed better accuracy and validity. The presentation of prediction equations using two, three, or four recommended measurements allows the selection of an equation based upon the measurements that are possible to collect on an individual basis.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2013년도 추계 학술발표논문집
• /
• pp.28-29
• /
• 2013

We have been measuring $CH_4$ flux in a rice paddy in Gimje using the eddy covariance method since July 2011. In order to measure the fast fluctuations of $CH_4$ concentration, an innovative LI-7700 open-path laser spectrometer is used. This high-precision, low power, light weight, low maintenance sensor enables us to operate it on a continuous and long-term basis. One particular feature, among other things, is the self-cleaning lower mirror which decreases maintenance requirements while ensuring more robust, continuous, high-quality dataset. Its cleaning is initiated at user-specified time intervals or a signal strength threshold, and its status is recorded as a diagnostic index. We have noticed that the operation of LI-7700 at Gimje site is quite challenging particularly due to its frequent mirror cleaning requirement and the associated sensitivity of the instrument. In this presentation, we present some field observation data regarding the mirror cleaning and their analysis, thereby suggesting the pertinent operation options for high-quality, maximum data retrieval in the field.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.653-656
• /
• 2009

현재 초고속 통신망의 발전과 하드웨어의 발전으로 인하여 많은 멀티미디어 콘텐츠들이 인터넷상에서 아주 빠른 속도로 퍼지고 있다. 이러한 환경 때문에 멀티미디어 콘텐츠 제작 환경이 발전하고 있으며, 멀티미디어 콘텐츠들이 늘어나고 있다. 그러나 수많은 음성, 화상, 텍스트등과 같은 멀티미디어 콘텐츠의 시간과 공간적 동기화의 문제가 발생하기 시작하였다. 그래서 이러한 문제점을 해결하기 위하여 W3C(World Wide Web Consortium) 에서는 다양한 멀티미디어 콘텐츠의 표현을 구성할 수 있는 XML(Extensible Markup Language)에 기반을 둔 SMIL(Synchronized Multimedia Integration Language)이 표준으로 제안되었다. SMIL은 일련의 개별적 멀티미디어 객체를 시간과 공간적으로 동기화된 멀티미디어 표현으로 통합 할 수 있도록 한다. 본 논문에서는 다양한 멀티미디어 콘텐츠의 시간과 공간적인 동기화 하고, 통합하여 표현할 수 있도록 SMIL 저작 시스템을 설계 및 구현 하였다.