• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1545-1553
• /
• 2018

Recent eruptive activity at Kīlauea Volcano started on at the end of April in 2018 showed rapid ground deflation between May and June in 2018. On summit area Halema'uma'u lava lake continued to drop at high speed and Kīlauea's summit continued to deflate. GPS receivers and electronic tiltmeters detected the surface deformation greater than 2 meters. We explored the time-series surface deformation at Kīlauea Volcano, focusing on the early stage of eruptive activity, using multi-temporal COSMO-SkyMed SAR imagery. The observed maximum deformation in line-of-sight (LOS) direction was about -1.5 meter, and it indicates approximately -1.9 meter in subsiding direction by applying incidence angle. The results showed that summit began to deflate just after the event started and most of deformation occurred between early May and the end of June. Moreover, we confirmed that summit's deflation rarely happened since July 2018, which means volcanic activity entered a stable stage. The best-fit magma source model based on time-series surface deformation demonstrated that magma chambers were lying at depths between 2-3 km, and it showed a deepening trend in time. Along with the change of source depth, the center of each magma model moved toward the southwest according to the time. These results have a potential risk of including bias coming from single track observation. Therefore, to complement the initial results, we need to generate precise magma source model based on three-dimensional measurements in further research.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.1119-1130
• /
• 2018

Soyang Lake has been contributing to economic growth by preventing flood damage in the metropolitan area, the water level in the middle to upper flow of lake has been greatly decreased due to the drought in 2015. In order to restore the existing flow rate, Bupyungbo has been built in Bupyeong-ri, Shin Nam-myeon, Inje-gun to cause artificial changes on the sedimentary environment of Bupyeong freshwater region. Therefore, this study intends to confirm the changes of sedimentary environment since Bupyeongbo has been utilized. For this study, we used the Sentinel-2 satellite image data periodically to measure the dimension of water according to the volume of water kept near Bupyung district and analyzed the particle size and the percentage of water content of the sediments through field study. The Sentnel-2 satellite images showed us how the water surface has been changed and that during the period from September 2017 to October 2018, the minimum and maximum area of water surface was observed in June 2018 and in January 2018, respectively. In addition, we find that the smaller being the particle size, the higher having the water content and that there is higher the correlation between the water content and the grain size of the sediment layer. Hereafter, if we will acquire the drone images at Bupyung district, we expect that we will be able to measure the distribution of sediments in the same area according to different time periods and observe various kinds of sediment through field work.

• Journal of Dairy Science and Biotechnology
• /
• v.37 no.1
• /
• pp.33-39
• /
• 2019

The purpose of this study was to explore the microbiological safety of various cheeses made from raw milk currently imported and sold in Korea. A total of 12 cheeses were considered for the study - 4 kinds of imported cheese made from raw milk, 4 kinds of imported cheese made from pasteurized milk, and 4 kinds of domestic cheese made from pasteurized milk, and aerobic count, presence of E. coli, Salmonella spp., and Listeria monocytogenes were investigated. Results from this study showed that in the 12 different kinds of cheese tested, E. coli, Salmonella spp., and Listeria monocytogenes were negative. Therefore, the sanitary conditions of imported cheese made from raw milk, imported cheese made from pasteurized milk, and domestic cheese made from pasteurized milk are considered safe. The mean aerobic count in the 12 types of tested cheese was below 4.0 log CFU/g. In conclusion, various cheeses produced from raw milk or pasteurized milk currently sold in Korea have been found to be hygienic and safe. In the future, raw milk cheeses produced and sold in Korea will require long-term research not only to ensure safety but also to produce new, high-quality products.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.30-36
• /
• 2019

Traditional cell culture(2-dimensional) is the method that provide a nutrient and environment on a flat surface to cultivate cells into a single layer. Since the cell characteristics of 2D culture method is different from the characteristics of the cells cultured in the body, attempts to cultivate the cells in an environment similar to the body environment are actively proceeding in the industry, academy, and research institutes. In this study, we will develop a technology to fabricate micro-structures capable of culturing cells on surfaces with various curvatures, surface shapes, and characteristics. In order to fabricate the hemispheric plastic structure(thickness $50{\mu}m$), plastic preform mold (hereinafter as "preform mold") corresponding to the hemisphere was first prepared by injection molding in order to fabricate a two - layer structure to be combined with a flat plastic film. Then, thermoplastic polymer dissolved in an organic solvent was solidified on a preform mold. As a preliminary study, we proposed injection molding conditions that can minimize X/Y/Z axis deflection value. The effects of the following conditions on the preform mold were analyzed through injection molding CAE, [(1) coolant inlet temperature, (2) injection time, (3) packing pressure, (4) volume-pressure (V/P). As a result, the injection molding process conditions (cooling water inlet temperature, injection time, holding pressure condition (V / P conversion point and holding pressure size)) which can minimize the deformation amount of the preform mold were derived through CAE without applying the experimental design method. Also, the derived injection molding process conditions were applied during actual injection molding and the degree of deformation of the formed preform mold was compared with the analysis results. It is expected that plastic film having various shapes in addition to hemispherical shape using the preform mold produced through this study will be useful for the molding preform molding technology and cast molding technology.

• Physical Therapy Korea
• /
• v.26 no.3
• /
• pp.67-75
• /
• 2019

Background: Stress urinary incontinence (SUI) is an involuntary leakage of urine from the urethra when intra-abdominal pressure increases, such as from sneezing, coughing, or physical exertion. It is caused by insufficient strength of the pelvic floor and sphincter muscles, resulting from vaginal delivery, obesity, hard physical work, or aging. The pelvic floor electrical stimulator is a conservative treatment generally used to relieve the symptoms of urinary incontinence. it recommended to applied before surgery is performed. Objects: The purpose of this study was to determine if the transcutaneous electrical stimulation (TCES) would be effective for the physiological symptoms and psychological satisfaction of women with SUI for an 8-weeks intervention. Methods: Easy-K is a specially designed user-friendly TCES. Five female who were diagnosed with SUI by a gynecologist but who did not require surgical intervention were included in this study. Intervention was implemented over an 8-week period. Outcome measures included vaginal ultrasonography, Levator ani muscle (LAM) contraction strength, incontinence quality of life (I-QOL), and female sexual function index (FSFI) questionnaires. Results: The bladder neck position significantly decreased across assessment time. Funneling index and urethral width significantly decreased after 8 weeks of intervention (p<.05). The bladder necksymphyseal distance and posterior rhabdosphincter thickness statistically increased and the anterior rhabdosphincter thickness showed a tendency to increase. All participants demonstrated a significant increase in the LAM contraction score across three assessment times (p<.05). Although the total score of the I-QOL did not show significant improvement, it steadily increased and among I-QOL subscales, only the "avoidance" subscale showed statistical improvements (p<.05). The total score of the FSFI statistically improved and the "desire" score significantly changed (p<.05). Conclusion: The TCES is recommended for women who want to apply conservative treatments before surgery and who have suffered from SUI in aspects of sexual function and quality of life.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.104-135
• /
• 2016

This paper aims to consider history and value of the Mingshansi Grottoes, a complex of Buddhist rock sculptures in Anyue County, Sichuan Province, China. Mingshansi Shiku, not that far from Baodingshan Grottoes at Dazu District, Chongqing City, is an important art work of Liu Benzun sect. Even though there are not many niches and sculptures in the Mingshansi Shiku, it was designated as a Major Historical and Cultural Site Protected at the National Level due to its large scale and highly valued art works in it. In the Mingshansi Grottoes there is not any information inscribed on the rockface about when the grottoes were established. Because a stone pagoda, which had information about when and by whom they were established, was collapsed, some scholars considered them to be made in North Song or early Southern Song Dynasties based only on the artistic style of sculptures of the grottoes. The School of Archaeology and Museology at Peking University recently carried out a survey documenting the Mingshansi Grottoes, and thereby the school gives an important material for studying the grottoes. The grottoes consist of a Dharma-protection Warrior niche, a statue of Guanyin and Dashizhi seated together, a standing Mahavairocana statue, a standing Manjushuri statue, a standing Wenshu and Puxian statue, a Turning Dharma-wheel pagoda (轉法輪塔 Zhuanfalunta) of Zhao Zhifeng, the founder of Liu Benzun sect. These statues are considered to be produced by an overall master plan in the Middle or Late Period of the Southern Song. The Shiku is believed to be a site at which Zhao Zhifeng performed some Buddhist rites such as Water and Land Rituals (水陸法會 Shuilufahui). Income of the ritual was also a major part of the funding for establishing large-scale Baoding Shiku at Dazu District, Chongqing City.

• Korean Journal of Child Education & Care
• /
• v.19 no.2
• /
• pp.129-143
• /
• 2019

Objective: The purpose of the present study is to develop a teacher efficacy scale of early childhood teachers and explore the validity and reliability of it. Methods: As the first step of this research, 17 teacher efficacy factors were extracted from previous studies on related areas and a survey from directors, teachers, and professors. The preliminary 83 items applicable to the chosen factors were developed and revised through content validity test from seven early childhood professionals, pilot test, item correction, main survey, and exploratory and confirmatory factor analyses. Four hundred seventy one teachers working in a kindergarten or day care center participated in this study. Results: The teacher efficacy scale for early childhood teachers was finalized with 3 factors and 23 items. The teacher efficacy scale was composed of 16 items in teaching competence, 4 items in interpersonal relationship, and 3 items in a sense of calling. Conclusion/Implications: In this study, the valid and reliable teacher efficacy scale was developed. This scale might be a useful tool to develop the further studies in the topics of teacher efficacy and teacher education by analyzing the relationship between efficacy of early childhood teachers and other variables.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.33 no.4
• /
• pp.207-218
• /
• 2019

It is necessary to investigate the efficacy of commercial Korean herbal medicine for cognitive disorder. The purpose of this study is to select candidates among licensed herbal medicines that are expected to be effective in the treatment of cognitive disorders and can be used in future clinical trial. From laboratory experiments, we first found individual single herbal drugs that could be effective for cognitive disorder, and then through experts recommendation, selected five priorities of single herbal drug and obtained the information of the best herb as a combination of each herbal drug. To derive the final herbal prescriptions, we searched the KFDA drug information system for licensed herbal medicines containing each drug and its combination. As a result of laboratory experiments and experts recommendation, we found that the five effective single herbal drugs for cognitive disorders. They are Ginseng Radix, Acori Graminei Rhizoma, Cyperi Rhizoma, Coptidis Rhizoma, Pinelliae Rhizoma, Hoelen cum Pini Radix, and Rehmanniae Radix Preparata(Pinelliae Rhizoma, Hoelen cum Pini Radix, and Rehmanniae Radix Preparata were tied for $5^{th}$). And licensed herbal prescriptions derived from the planned search are Palbohoichoon-tang, Taehwa-hwan, Bosim-hwan, and so on. Among these, in consideration of the feasibility of research and possibility of success in development, Yukgunja-tang, Samhwangjichul-hwan can be selected as future study subjects. Through experimental studies and expert recommendations, we have derived herbal prescriptions that can be effective in treating cognitive disorders from licensed herbal medicines.

• Korean Journal of Heritage: History & Science
• /
• v.34
• /
• pp.222-267
• /
• 2001

The purpose of this document is to explain the revisions of the Protection of Cultural Properties Act and its sub-laws which have been mad from Jan. 1999 to Sep. 2001. The Protection of Cultural Properties Act and its sub-laws have been revised three times from 1999 to 2001, before and after the Office of Cultural Properties was raised to Cultural Properties Administration on May 24, 1999. The main points of the revisions are as follows. First of all, the role of the local autonomous entities has been increased. The governor of the local autonomous entities is entitled to announce administrative orders related to the preservation of State-designated Cultural Properties. Also, the local autonomous entities has the authorities to examine whether the construction work which will be made in the outer boundaries, which is provided by regulations, of the protected area of the cultural properties might have any effect on preservation of cultural properties or not. Second, preventive actions to protect the cultural properties have been strengthened. If the scale of construction work is more than some scale, the preliminary survey of the surface of the earth to confirm the existence of buried cultural properties and their distribution is obligated. One who is promoting the development plan more than some scale must discuss the plan with the Administrator of Cultural Properties Administration in the process of planning. These actions would be effective to prevent the cultural properties from being damaged because of the development. Third, relaxation of the restrictions has been proceeded. On the basis of regulations which specify the actions to affect the preservation of cultural properties, negative system that does not limit the actions which are not specified in the regulations is introduced. The appropriateness of both protected structure and area should be regularly reviewed and adjusted. Also, most of the restrictions which was made only for administrative convenience and over-regulated the people's living have been revised. Finally, the number of cultural properties to be protected has been increased. Besides the State-designated Cultural Properties, the other cultural properties which are worthy to be protected as City-or-Province-designated Cultural Properties can be designated provisionally and protected. The system of registration and maintenance of the buildings and facilities which are not designated as the Modern Cultural Heritages is established. The penalty for damaging and stealing the cultural Properties which are not designated to be protected was strengthened. Even a dead natural monument can be acknowledged as an natural monument and it is limited to make a specimen or stuffing of the dead natural monument. All of these actions are fit to the high level of understanding of the public about the cultural properties and as the result of these actions, the number of cultural properties to be preserved has been increased. To sum up, the directions of revisions of the Protection of Cultural Properties Act and its sub­laws which have been made from Jan. 1999 to Sep. 2001. are the localization of the protection of the cultural properties, the strengthening of protective actions, the relaxation of various regulations and the increasing of the number fo the protected cultural properties. Also, various problems raised in the processes of implementations of the laws have been reviewed and revised.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.475-481
• /
• 2019

A splint is one of assisting devices for the disabled with hemiplegia or contracture and is manually made by an experienced expert. Heated thermoplastic materials are continuously fitted to the affected part. This traditional method has a possible risk of low-temperature burn, quality variance of the splint due to the proficiency of maker. etc. While various approaches has been made using 3D printing technology in order to redeem those disadvantages, they still carry high cost issues with 3D scanners or accuracy issues with manual measurement. This research begins with symmetrical characteristics of human body and focuses on the preliminary study for the possibility of splint manufacturing with 3D printing technology based on geometric characteristics of unaffected arm. 3D right and left forearm models of healthy male adults were created by photogrammetry software and a series of digital images in order to measure the circumference and cross-sectional area of the forearm models at every 20mm from the elbow. The circumference and cross-sectional area showed tolerable levels of differences between both sides within subjects; The circumference and cross-sectional area showed very strong correlations between both sides within subjects. From these findings, the possibility of splint manufacturing with 3D printing technology could be confirmed based on the geometric characteristics of unaffected side.