• Steel and Composite Structures
• /
• 제17권3호
• /
• pp.237-252
• /
• 2014

The use of composite structures is increasingly present in civil building works. Composite Box Girder Bridges (CBGB), particularly, are study of effect of shear connector's numbers and distribution on the behavior of CBGBs is submitted. A Predicti structures consisting of two materials, both connected by metal devices known as shear connectors. The main functions of these connectors are to allow for the joint behavior of the girder-deck, to restrict longitudinal slipping and uplifting at the element's interface and to take shear forces. This paper presents 3D numerical models of CBGBs to simulate their actual structural behavior, with emphasis on the girder-deck interface. Additionally, a Prediction of several FE models is assessed against the results acquired from a field test. A number of factors are considered, and confirmed through experiments, especially full shear connections, which are obviously essential in composite box girder. A good representation for shear connectors by suitable element type is considered. Numerical predictions of vertical displacements at critical sections fit fairly well with those evaluated experimentally. The agreement between the FE models and the experimental models show that the FE model can aid engineers in design practices of box girder bridges. Preliminary results indicate that number of shear studs can be significantly reduced to facilitate adoption of a new arrangement in modeling CBGBs with full composition. However, a further feasibility study to investigate the practical and economic aspects of such a remedy is recommended, and it may represent partial composition in such modeling.

• 광물과 암석
• /
• 제33권1호
• /
• pp.65-71
• /
• 2020

유리 표준물질은 정밀 지구화학 분석법에 필수적으로 이용되는 표준물질이다. 기존의 합성 유리 표준물질의 단점인 자연 암석과의 조성 차이로 인한 높은 불확실성을 보완하기 위해, 자연산 암석을 이용하여 유리 표준물질을 제작하였다. 백두산 흑요암인 NK-B1G 시료는 미세결정이나 포유물 등의 결정을 포함하지 않는 자연 유리질 암석으로, EPMA나 LA-ICPMS 분석 등의 미세분석을 위한 표준물질로서의 적합성을 확인하였다.

• 산업경영시스템학회지
• /
• 제35권2호
• /
• pp.212-219
• /
• 2012

This study focus on what methods of MOT are needed and utilized to solve a technical problem in the MOT leading company. We first classified the MOT methods by project life cycle and R&D job quality based on the several discussion with working group. In order to study, the survey was carried out by 168 experts working on MOT practices. Our main research findings are as follows. The level of utilized MOT methods was above average because MOT sector was beginning to represent an increasing share of total R&D business. But the satisfaction level on the MOT majors was below average. The more utilized MOT methods in practices were 'environment analysis and opportunity research,' 'business feasibility,' 'roadmapping,' 'portfolio,' 'technology tree,' 'scheduling,' 'risk management,' 'six sigma,' 'design of experiment,' 'quality control,' 'cost analysis' etc. And the subjects of product realization process were also needed to MOT practice such as 'design for reliability,' 'design for cost,' 'design for performance,' 'design for safety' deeply involved to product quality. Finally, the capability requested to University students were 'problem define and solving,' 'technology planning and strategy,' 'creative thinking.'

• 한국광학회지
• /
• 제12권1호
• /
• pp.55-60
• /
• 2001

광학적 Hough 변환 필터 배열을 이용하여 입력영상의 특징을 추출할 수 있는 방법을 제안한다. 여기서는 입력 영상의 부분들이 대용되는 필터 배열의 요소들에 의해 독립적으로 동시에 Hough 변환된다. 하나의 광학적 Hough 변환 필터를 사용하여 입력영상 전체에 대한 변환 결과를 얻는 기존의 방식에 비해, 제안한 방법은 입력 영상에 존재하는 선소 특징의 대략적 위치 정보를 함께 얻을 수 있고 복잡한 입력영상에 대해서도 광학적 정확성을 높일수 있다. 이 방식을 실험적으로 입증하기 위해 $5\times5$ Hough 변환 필터 배열을 제작하고 기초적인 실험을 수행하였다.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.388-394
• /
• 2014

In this paper, we propose a three-dimensional (3D) image correlator by use of computational integral imaging reconstruction based on the modified convolution property of periodic functions (CPPF) for recognition of partially occluded objects. In the proposed correlator, elemental images of the reference and target objects are picked up by a lenslet array, and subsequently are transformed to a sub-image array which contains different perspectives according to the viewing direction. The modified version of the CPPF is applied to the sub-images. This enables us to produce the plane sub-image arrays without the magnification and superimposition processes used in the conventional methods. With the modified CPPF and the sub-image arrays, we reconstruct the reference and target plane sub-image arrays according to the reconstruction plane. 3D object recognition is performed through cross-correlations between the reference and the target plane sub-image arrays. To show the feasibility of the proposed method, some preliminary experiments on the target objects are carried out and the results are presented. Experimental results reveal that the use of plane sub-image arrays enables us to improve the correlation performance, compared to the conventional method using the computational integral imaging reconstruction algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권3호
• /
• pp.1404-1415
• /
• 2016

Because of the properties of software such as invisibility, complexity, and changeability, software configuration management (SCM) for software artifacts generated during software life-cycle has been used for guarantee of the quality of the software. However, the existing SCM system has only focused on code artifacts and software development document artifacts such as Software Requirements Specification (SRS), Software Design Description (SDD), and Software Test Description (STD). Moreover, software research-oriented project comes out late the code artifacts and the software development document artifacts. Therefore, there is a need for trace and management of software research document artifacts composed of highly abstracted non-functional requirements like 'the purpose of the project', 'the objectives', and 'the progress' before generation of the code artifacts and the software development document artifacts for a long time. Nevertheless, the existing SCM system cannot trace and manage them. In this paper, we propose content-based configuration management system comprised of the relevance link generation phase and content-based testing phase to trace and manage them. The preliminary application results show applicability and feasibility of the proposed system.

• 한국정보통신학회논문지
• /
• 제17권4호
• /
• pp.981-988
• /
• 2013

본 논문에서는 집적 영상 기술을 이용하여 한 번의 획득 과정을 통하여 물체의 3차원 공간정보를 저장한 후 저장된 정보를 이용하여 집속면(focusing plane)에 대응하는 디포커싱 영상을 구현하는 방법을 제안한다. 집속면에 대응하는 ${\delta}$-함수 배열과 기본영상의 콘볼루션 연산을 통하여 집속면에 대응하는 포커싱 및 디포커싱영상을 구현하였다. 디포커싱 정도는 집속면과 물체거리의 차이에 따라 상대적으로 달라짐을 관찰 할 수 있었다. 제안하는 방법에 대한 기초적인 실험을 수행하고 그 결과를 보고한다.

• 한국정보통신학회논문지
• /
• 제17권3호
• /
• pp.712-717
• /
• 2013

본 논문에서는 향상된 물체 인식을 위한 픽셀 복원 기반의 비선형 3D 상관기를 제안한다. 제안한 방법은 부분적으로 가려진 물체로부터 요소영상을 픽업하고 서브영상으로 변환하고 영역 매칭 알고리즘 방법을 이용하여 서브영상으로부터 장애물로 가려진 영역을 검출하고 제거한다. 그 다음 픽셀 복원 방법으로 각 서브영상에서 제거된 물체의 픽셀을 복원한다. 마지막으로, 재생된 참조영상과 재생된 영상 사이의 비선형 상호상관을 통하여 3D 물체의 인식 성능을 향상 시킨다. 제안된 방법의 유용함을 보이기 위해 기존 방법과 비교하여 기초적인 상관관계 실험을 수행하고 그 결과를 보고한다.

• 한국유체기계학회 논문집
• /
• 제19권2호
• /
• pp.49-54
• /
• 2016

A conceptual study of an air-cooled heat exchanger is conducted to achieve the long-term passive cooling of an integral reactor. A newly designed air-cooled heat exchanger is introduced in the present study and preliminary thermal sizing is demonstrated. This study mainly focuses on feasibility of an innovative air-cooled heat exchanger to extend the cooling period of the passive residual heat removal system(PRHRS) only in passive manners. A vertical shell-and-tube air-cooled heat exchanger is installed at the top of the emergency cooldown tank(ECT) to collect evaporated steam into condensate, which enables water inventory of the ECT to be kept. Finally, thermal sizing of an air-cooled heat exchanger is presented. The length and the number of tubes required, and also the height of a stack are calculated to remove the designated heat duty. The present study will contribute to an enhancement of the passive safety system of an integral reactor.

• Journal of Microbiology and Biotechnology
• /
• 제25권1호
• /
• pp.26-32
• /
• 2015

Four types of straw, namely, soybean, wheat, corn, and rice, were investigated for use in lactic acid production. These straws were mainly composed of cellulose, hemicellulose, and lignin. After pretreatment with ammonia, the cellulose content increased, whereas the hemicellulose and lignin contents decreased. Analytical results also showed that the liquid enzymatic hydrolysates were primarily composed of glucose, xylose, and cellobiose. Preliminary experiments showed that a higher lactic acid concentration could be obtained from the wheat and soybean straw. However, soybean straw was chosen as the substrate for lactic acid production owing to its high protein content. The maximum lactic acid yield (0.8 g/g) and lactic acid productivity (0.61 g/(l/h)) were obtained with an initial reducing sugar concentration of 35 g/l at 30℃ when using Lactobacillus casei (10% inoculum) for a 42 h fermentation period. Thus, the experimental results demonstrated the feasibility of using a soybean straw enzymatic hydrolysate as a substrate for lactic acid production.