• 제목/요약/키워드: Predictive Equation

검색결과 247건 처리시간 0.028초

임업(林業)에서의 순수작업시간(純粹作業時間)과 임목형상조건(林木形狀條件)과의 관계연구(關係硏究) (A Study on the Relation between Working Time and Tree Formal Characteristics)

  • 강건우
    • 한국산림과학회지
    • /
    • 제78권4호
    • /
    • pp.381-395
    • /
    • 1989
  • 본 연구는 임업 경영에 있어서, 그 중에서도 특히 간벌 작업에서 순수 작업시간과 임목의 형상 조건과의 관계를 구명함으로써 임금표나 공정표에 대한 과학적인 기초 자료를 제공하는데 목적이 있다. 시험 대상지와 수종은 경남 양산에서 참나무 460본, 강원도 봉평에서 낙엽송 372본과 적송 232본, 전북진안에서 리기다 소나무 240본을 선정하였으며, 회귀식에 의한 분석 결과는 다음과 같다. 1. 수종별 임목의 형상 조건인 5개의 독립 변수는 순수 작업 시간을 산출하는데 있어 작업원별로 동일 조건임을 확인하였다. 2. 임목의 형상 조건간의 서로 상관관계를 구명, 유의성을 확인하였으며, 결과적으로 순수 작업시간(WT)은 흉고직경(DBH)과 전체 가지수(NOB)로부터 가장 크게 영향을 받았다. 3. 변수의 수에 따른 결정계수(Rp)와 잔차평균제곱(MSEp)을 비교하여 최적회귀식을 수종별로 산출하였으며 여기에서 모든 수종으로부터 흉고직경(DBH)과 가지수(NOB)가 조합된 $WT=a+b1{\times}NOB+b2{\times}DBF$의 식이 유도 되었다. 4. 간벌 작업에서 걸림시간(Hang-up time)을 산출해보면 전체 작업 사간에 대하여 참나무가 평균 66%, 낙엽송 74%, 적송55% 그리고 리기다 소나무가 52%를 나타났다. 5. 수종별 휴고직경(DBH)과 가지수(NOB) 2변수로 부터의 최적 회귀 방정식에 작업 시간표를 작성하였으며, 6. 여기에서 전체 작업시간(Total WT)은 벌도시간(FT)과 조재시간(LT) 그리고 걸림시간(HT)을 모두 합한 것으로써 임목의 1cm 증가마다 11-13초의 작업시간 증가를 나타냈다.

  • PDF

덧씌우기 응력흡수층에 대한 전단, 부착강도 평가 및 파괴에너지 예측모델 개발 (Evaluation of Interlayer Shear Properties and Bonding Strengths of a Stress-Absorbing Membrane Interlayer and Development of a Predictive Model for Fracture Energy)

  • 김도완;문성호;권오선;문기훈
    • 한국도로학회논문집
    • /
    • 제20권1호
    • /
    • pp.87-95
    • /
    • 2018
  • PURPOSES : A geo-grid pavement, e.g., a stress-absorbing membrane interlayer (SAMI), can be applied to an asphalt-overlay method on the existing surface-pavement layer for pavement maintenance related to reflection cracking. Reflection cracking can occur when a crack in the existing surface layer influences the overlay pavement. It can reduce the pavement life cycle and adversely affect traffic safety. Moreover, a failed overlay can reduce the economic value. In this regard, the objective of this study is to evaluate the bonding properties between the rigid pavement and a SAMI by using the direct shear test and the pull-off test. The predicted fractural energy functions with the shear stress were determined from a numerical analysis of the moving average method and the polynomial regression method. METHODS : In this research, the shear and pull-off tests were performed to evaluate the properties of mixtures constructed using no interlayer, a tack-coat, and SAMI with fabric and without fabric. The lower mixture parts (describing the existing pavement) were mixed using the 25-40-8 joint cement-concrete standard. The overlay layer was constructed especially using polymer-modified stone mastic asphalt (SMA) pavement. It was composed of an SMA aggregate gradation and applied as the modified agent. The sixth polynomial regression equation and the general moving average method were utilized to estimate the interlayer shear strength. These numerical analysis methods were also used to determine the predictive models for estimating the fracture energy. RESULTS : From the direct shear test and the pull-off test results, the mixture bonded using the tack-coat (applied as the interlayer between the overlay layer and the jointed cement concrete) had the strongest shear resistance and bonding strength. In contrast, the SAMI pavement without fiber has a strong need for fractural energy at failure. CONCLUSIONS : The effects of site-reflection cracking can be determined using the same tests on cored specimens. Further, an empirical-mechanical finite-element method (FEM) must be done to understand the appropriate SAMI application. In this regard, the FEM application analy pavement-design analysis using thesis and bonding property tests using cored specimens from public roads will be conducted in further research.

Development of User-Friendly Modeling Software and Its Application in Processed Meat Products

  • Lee, Heeyoung;Lee, Panho;Lee, Soomin;Kim, Sejeong;Lee, Jeeyeon;Ha, Jimyeong;Choi, Yukyung;Oh, Hyemin;Yoon, Yohan
    • 한국식품위생안전성학회지
    • /
    • 제33권3호
    • /
    • pp.157-161
    • /
    • 2018
  • 본 연구에서는 육제품의 다양한 조건(포장, 저장온도, 염농도, 아질산염농도)에서의 식중독세균의 생장을 예측하는소프트웨어를 예측미생물학에 대한 지식이 부족한 비전문가도 손쉽게 이용할 수 있도록 개발하였다. 육제품에서의 식중독세균예측소프트웨어(FAME: Foodborne bacteria Animal product Modeling Equipment)는 Javascript와 HTML을 이용하여 개발하였으며, 육제품에 대한 카이네틱모델과 확률모델을 포함하고있다. FAME에서는 검증(validation) 기능을 포함하고 있으며, FAME에 탑재 되어있는 예측모델의 수식을 자유롭게 수정할 수 있도록 고안 하였다. FAME에는 포장조건, 온도, 염농도, 아질산염농도 조합에 따라 실험한 데이터를 카이네틱모델(5,400 데이터)과 확률모델(345,600 데이터)에 탑재하였다. 사용자가 FAME을 이용하여 육제품의 제조 조건을 소프트웨어에 입력하면, 시간에 따른 식중독세균의 생장패턴과 생장확률이 즉시 계산 되어진다. 따라서 예측 미생물학에 대한 전문 지식이 없는 비전문가라고 하더라도 FAME을 이용하여 직접 실험을 하지 않고도 육제품에서의 식중독세균의 생장을 쉽고 빠르게 예측할 수 있어, 육가공분야에서 매우 유용하게 사용되어 질 수 있을 것으로 판단된다.

파시르 탄광에서의 발파진동의 전파특성 분석 (Analysis of the Propagation Characteristics of Blast Vibrations in Pasir Coal Mine)

  • 최병희;류동우;선우춘
    • 화약ㆍ발파
    • /
    • 제24권2호
    • /
    • pp.51-63
    • /
    • 2006
  • 인도네시아 파시르 탄광에서는 전형적으로 일자유면 발파방법이 사용되고 있다. 일반적으로 이 방법은 노천에서 지표면을 유일한 자유면으로 한 발파법이므로 구속이 커서 화약의 에너지가 저항선의 파괴에 효율적으로 사용되지 못하고 발파의 부작용으로 간주되는 지반진동의 유발에 많이 소모된다. 현재 파시르 탄광에서는 모암의 제거를 위한 굴착발파에 이와 같은 일자유면 발파방법을 적용하고 있지만 이는 노천광산에서 일반적으로 적용되는 이자유면 발파인 계단식 발파에 비해 큰 지반진동을 유발할 가능성이 높다 더욱이 파시르 탄광의 경우 노천 채굴적의 양안이 연약사면으로 이루어진 곳이 많아 높은 지반진동 수준은 이들 사면의 안정성에 큰 영향을 미칠 수 있다 또한, 진동문제와는 별도로 일자유면 발파는 저항선이 하나뿐이므로 암반파괴의 측면에서도 발파효율이 좋지 않다. 따라서 파시르 탄광에서 나타나고 있는 발파의 비효율성과 진동증가 문제를 개선할 목적으로 새로운 발파공법에 대한 연구가 착수되었으며, 이 연구의 일환으로 현행 발파공법에 대한 조사가 기 수행된 바 있다. 본 논문에서는 파시르 탄광에서 수행한 지반진동의 계측과정과 결과를 현행 발파공법과 함께 제시하고, 측정된 자료에 대한 통계처리를 통해 대상지역에서의 지반진동의 전파특성을 분석하였다.

질소 불순물이 이산화탄소 해양 지중저장 공정설계에 미치는 영향 평가: 상태방정식의 비교 분석 및 이성분 매개변수 최적화 (Effect of Nitrogen Impurity on Process Design of $CO_2$ Marine Geological Storage: Evaluation of Equation of State and Optimization of Binary Parameter)

  • 허철;강성길
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제12권3호
    • /
    • pp.217-226
    • /
    • 2009
  • 발전소 및 제철소 등 대규모 발생원에서부터 포집한 $CO_2$ 혼합물을 파이프라인이나 선박 등을 통해 수송하고, 이를 해양의 퇴적층에 수백-수천 년 이상 장기간 격리 및 관리하는 $CO_2$ 해양지중저장기술이 기후변화 대응기술로서 국내외적으로 주목 받고 있다. 본 CO2 저장기술을 구현하기 위한 수송 및 저장 공정에 대한 기존의 연구는 주로 순수 $CO_2$를 대상으로 하여 진행되어 왔다. 그러나 일반적으로 발전소 및 제철소 등에서 포집된 $CO_2$ 혼합물에는 $N_2$, $O_2$, Ar, $H_2O$, $SO_x$, $H_2S$ 등과 같은 불순물들을 포함하고 있다. 이러한 $CO_2$ 혼합물 내 불순물들은 처리하고자 하는 $CO_2$ 혼합물의 열역학 상태량 등을 변화시킴으로써 압축, 정제, 수송 및 저장 공정들에 커다란 영향을 미칠 수 있다. 본 논문에서는 이러한 불순물 중 불활성 가스인 $N_2$가 포함된 $CO_2$ 혼합물의 수송 및 저장 공정을 설계하는데 있어 매우 중요한 $CO_2$ 혼합물의 열역학 거동을 모사하기 위한 열역학 상태방정식들을 비교 분석하였다. 또한, $CO_2$, $N_2$와 같은 서로 다른 분자간의 상호작용 효과를 보완하기 위하여 사용되는 이성분 매개변수에 대한 최적 값을 도출하였다.

  • PDF

피혁제조 공정 중 토글 작업에서 요통과 관련된 요추 부하의 생체역학적 분석과 개선 방안 (Biomechanical Analysis on Dynamic Back Loading Related with Low Back Disorders with Toggle Tasks in Leather Industry Low back)

  • 김규상;홍창우;이동경
    • 한국산업보건학회지
    • /
    • 제18권3호
    • /
    • pp.239-247
    • /
    • 2008
  • Low back disorders (LBDs) have been the most common musculoskeletal problem in Korean workplaces. It affects many workers, and is associated with high costs to many companies as well as the individual, which can negatively influence even the quality of life of workers. The _evaluation of low back disorder risk associated with manual materials handling tasks can be performed using variety of ergonomic assessment tools such as National Institute for Occupational Safety and Health (NIOSH) Revised Lifting Equation (NLE), the Washington Administrative Code 296-62-0517 (WAC), the Snook Tables etc. But most of these tools provide limited information for choosing the most appropriate assessment method for a particular job and in finding out advantage and disadvantage of the methods, and few have been assessed for their predictive ability. The focus of this study was to _evaluate spinal loads in real time with lifting and pulling heavy cow leathers in variety of postures. Data for estimating mean trunk motions were collected as employees did their work at the job site, using the Lumbar Motion Monitor. Eight employees (2 males, 6 females) were selected in this study, in which the load weight and the vertical start and destination heights of the activity remained constant throughout the task. Variance components (three dimensional spaces) of mean trunk kinematic measures were estimated in a hierarchical design. They were used to compute velocity and acceleration of multiple employees performing the same task and to repetitive movements within a task. Therefore, a results of this study could be used as a quantitative, objective measure to design the workplace so that the risk of occupationally related low back disorder should be minimized.

청소년 자살생각에 대한 부모학대와 또래괴롭힘의 영향에서 대인관계내재화와 절망감의 매개효과 (The Effects of Parental Abuse and Peer Victimization on Adolescent's Suicidal Ideation -The Mediating Pathway of Interpersonal Needs and Hopelessness-)

  • 홍나미
    • 한국사회복지학
    • /
    • 제64권1호
    • /
    • pp.151-175
    • /
    • 2012
  • 본 연구는 청소년의 자살생각을 감소시키며 자살위험에 처한 청소년을 위한 개입방안을 모색하기 위하여 청소년 자살생각에 미치는 부모학대와 또래괴롭힘의 영향에서 대인관계내재화와 절망감의 매개효과를 살펴보았다. 연구결과, 부모학대는 매개변인을 통하여 청소년의 자살생각에 미치는 영향보다 직접적으로 자살생각에 미치는 영향이 더 큰 것으로 나타났다. 반면, 또래괴롭힘은 대인관계내재화와 절망감에 순차적으로 매개함으로써 청소년의 자살생각에 영향을 미치는 것으로 나타났다. 이러한 연구결과를 바탕으로 실천적 함의 및 후속연구에 대한 제언을 제시하였다.

  • PDF

정수처리에서 염수요구량 및 반응거동에 관한 연구 (Evaluation of Chlorine Demand and Chlorine Decay Kinetics for Drinking Water)

  • 이윤진;조관형;최종헌;명복태;남상호
    • 한국환경보건학회지
    • /
    • 제27권1호
    • /
    • pp.27-35
    • /
    • 2001
  • This aim of the work presented in this paper is to investigate the factors that affcet chlorine decay and to develop functional relationships that can be used to enhance the durability of network models. predictive relationships were established that correlated the rate of chlorine decay to the various water conditions such as DOC, N $H_3$-N, initial chlorine, contact time, temperature and pH values. Free chlorine residual decreased with increasing temperature, DOC, N $H_3$-N, reaction time and chlorine dose. At 2$0^{\circ}C$, pH 7, The initial chlorine demand per mg as DOC/L and mg as N $H_3$-N/L was about 0.43, 2.69 mg/$\ell$ respectively at 180 minutes contact time. The Reaction between chlorine and humic acids was lasted intil 48hr, but the reaction between chlorine and N $H_3$-N was almost completed in 180 min. When the temperature is raised by 1$0^{\circ}C$, chlorine is more consumed about 0.25 mg/$\ell$ in the absence of organic substances and it is more consumed about 3.4 mg/$\ell$ in the presence of humic acid (5 mg/$\ell$) in water at pH 7 for 180 min. Regression Analysis created the resulting prediction equation for the chlorine decay in a SPSS package of the computer system. The model is as follows; $C_{t}$=1.239+0.707(Co)-0.000529(Time)-0.0112(Temp)+0.02227(pH)-0.42(DOC)-2.132(N $H_3$-N).).

  • PDF

대학생자녀와 부모의 세대간 태도의 귀인과정 (Attribution Processes of Intergenerational Attitudes among College Students and Their Parents)

  • 안재희;유계숙
    • 가정과삶의질연구
    • /
    • 제24권5호
    • /
    • pp.223-237
    • /
    • 2006
  • This study explores how well parents and their children recognize the social attitudes of one another. Mothers, fathers and youths were asked to state their own opinion on various social issues then predict their children's, fathers' and mothers' responses(attributed attitudes). Empirical evaluation of the possible socialization consequences of actual versus attributed attitudes leads to a series of hypotheses. The data were collected from single students at a university in Seoul and their parents. Included in the seven social attitude were sexuality, educational, economic, political, ecological, religious and family issues. Analysis of the responses 98-110 triads, each consisting a mother, a father and a young adult child showed that both mothers and fathers were limited in their ability to gauge the attitudes of their children. Guided by attribution theory, this study tested several hypothesized relationships between the actual response of mother, the actual response of the father, the perceived response of the mother, the perceived response of the father and the actual response of the child. The theoretical model was tested with AMOS 5.0, utilizing path analysis, which is a form of structural equation modeling with manifest variables. Overall model fit was assessed by examining GFI, NFI, TLI, CFI and RMR. Results of the data analysis can be summarized as follows. First, the children perceived their mothers and fathers to be highly similar in their opinions and the actual responses of the mothers and the fathers were considerably correlated. Second, the fathers' responses whether attributed or actual were more predictive than the mothers' responses to their children's opinions. The alternative model suggests considerable support for the attribution theory. Indeed, within a family, the actual opinions of parents appear to have little direct bearing on the child's orientations, except when the actual orientations are perceived and reinterpreted by the children. It is not what parents think, but what their children think they think that predicts their offsprings' attitudes.

소방보호복 소재의 공기간극이 열보호 성능에 미치는 영향 (Effect of Fire Fighters' Turnout Gear Materials Air Gap on Thermal Protective Performance)

  • 이준경;권정숙
    • 한국화재소방학회논문지
    • /
    • 제28권4호
    • /
    • pp.97-103
    • /
    • 2014
  • 소방보호복은 고열유속에 의한 화상방지를 위해 3층 이상의 복합소재로 구성되어 있으며, 각 소재 사이는 공기 간극이 존재한다. 화재에 의한 고열유속 노출 시 공기 간극 내에서의 열전달은 대류와 복사에 의해 주로 발생하며, 그로 인해 간극의 크기에 따라서 비선형 특징의 열 저항 크기를 갖게 된다. 그러므로 본 연구에서는 보호복 소재 사이의 여러 가지 공기 간극(0~7 mm)에 대한 보호복의 열 보호성능을 자세히 파악하기 위한 실험을 수행하였다. 복사 열 유속 입사시에 시간에 따른 각 소재의 온도 변화뿐만 아니라, 열 보호성능을 가장 효과적으로 나타낼 수 있는 지표(Radiant Protective Performance, RPP) 값의 공기간극에 대한 변화 특성을 파악하였다. 공기간극이 증가할수록 단열효과가 커짐으로 인해 후면의 온도는 낮아지고, RPP는 커짐을 확인할 수 있었다. 특히 일정 열유속 조건에서 공기간극에 대한 RPP 값은 선형적인 특성을 나타내었고, 그러한 결과를 바탕으로 다양한 입사 열유속 및 공기 간극 조건에 대해 비교적 간단한 형태의 RPP 지표 예측 식을 제안하였고, 좋은 예측 결과를 얻을 수 있었다.