• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.573-582
• /
• 1994

본 논문에서는 이미 제안된 발파진동식 중에서 국내의 지질조건에 가장 적합한 식을 연구하였다. 국내에서 측정된 여러 현장의 자료를 이용하여 제안된 발파진동식의 적합성을 분석 검토하였다. 실측자료를 이용한 발파진동식의 산정은 선형회귀분석을 적용하였다. 또한 실측자료로 각 발파진동식을 산출한 후에는 이 발파진동식에 다시 환산거리를 대입하여 진동속도를 산출하였다. 산출한 진동속도와 측정한 진동속도를 비교함으로써 회귀분석한 발파진동식의 신뢰성을 도심지의 소규모발파와 채석장의 대규모발파를 나누어서 살펴보았다. 그 결과 국내의 지질조건에 가장 적합한 식은 미광무국에서 제안한 ROOT SCALE과 CUBE ROOT SCALE 임을 밝혔다. 또한 본 논문에서는 실측자료와 기존의 현장자료를 이용하여 각 암종을 대표할 수 있는 발파진동식을 제안하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.800-804
• /
• 2005

In this paper, the radiated sound pressure induced by low velocity impact is obtained by solving the Rayleigh integral equation. For structurally radiated noise, the sound field is directly coupled to the structural motion. Therefore the impact response should be analyzed. It is well known that the presence of the delamination in a composite laminate introduces a local flexibility which changes the dynamic characteristic of the structure. The 2-D simplified delamination model is used to analyze the impact response. And the 3-D non-linear finite element model is developed using gap element to avoid the overlap and penetration between the upper and lower sub-laminates at delamination region. Predicted impact response using 2-D equivalent delamination model are compared with the numerical ones from the 3-D non-linear finite element model.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3045-3054
• /
• 1993

The mechanics related with piston-slap induced vibration has been studied in terms of non-dimensionalized dynamic equation of motion, various non-dimensional parameters such as non-dimensional side-thrust force and non-dimensional impact velocity throughout the numerical simulation. Experimental verification on the suggested prediction method has been also performed by using single cylinder engine which was carefully designed and manufactured to wisely control the engine parameters, especially clearance and the mass of piston. The predicted and experimentally observed vibration signature confirm that the proposed method is practically useful.

• 한국지반공학회논문집
• /
• 제26권8호
• /
• pp.59-66
• /
• 2010

본 연구에서는 동다짐 공법을 적용할 시 개량심도와 진동영향 예측을 유한요소해석을 통해 그 적용성을 규명하였다. 동다짐 공법이 적용된 기존 현장 조건에 따라 지반을 모델링하였으며, 동적하중 모델은 rigid body force를 적용하였다. 개량심도는 심도별 최대 연직 입자 가속도로 예측을 하여 기존 경험식과 비교 분석하였으며, 진동영향은 진동원으로부터 거리별 연직 최대 입자 속도를 도출하여 기존 경험식에 의한 값과 비교 분석하였다. 수치해석 결과, 개량심도의 경우 기존의 경험식과 비슷한 양상을 띄고 있으며, 진동영향의 경우는 기존 식과 특정 구간에서 차이를 보이고 있으나, 어느 정도 소요이격거리를 예측 할 수 있었다. 이들 해석결과는 경험적인 방법과 더불어 동다짐 설계의 신뢰도 향상을 위한 기초적인 자료가 될 것으로 보인다.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.61-67
• /
• 2013

In this paper, it was studied how the critical speed which could occur hot judder due to disk temperature. Through the dynamometer experiment, we measured the critical velocity and surface temperature when the hot judder occur on the disk break. Also with the critical velocity theory equation and the temperature change graph of factors which used in the equation, we was induced experiment equation including theory equation and experiment values. And it has compared with the method which approach as linea. From this, we predicted the change of critical speed which could occur hot judder due to disk temperature. In addition, critical speed graph has compared with actual driving speed and disc temperature at a vehicle test. Therefore it was estimate to possibility of arising hot judder.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권1호
• /
• pp.100-108
• /
• 2017

최근에 도시화와 산업화 및 교통망의 지속적인 확보로 인하여 발파공사를 시행하는 공사장이 증가하고 있다. 발파공사는 주변 주민들의 주거환경과 인접시설물들의 안전에 큰 영향을 미치므로 이에 대한 대책이 필요하다. 본 연구에서는 발파피해를 줄이기 위한 방법 중에서 발파공내의 발파메커니즘을 규명하고 개선하였다. 일반적인 공법에서 발생하는 천공경과 폭약경 사이의 차이로 인한 공간에서 디커플링효과를 규명하고, 이 공간의 매질을 변화시킴으로서 발파 시 진동발생의 규모를 규명하였다. 발파시험은 도로, 철도, 산업단지에서 실시하고, 발파진동을 측정하였다. 측정된 진동속도를 회귀분석하여 발파진동추정식을 산정하고 이를 이용하여 이격거리를 산정하였다. 공내 매질이 공기보다는 물처럼 비중이 큰 경우에 충격력은 크나 폭발 지연시간이 짧아 진동전달거리가 작아 이격거리를 크게 확보할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.289-294
• /
• 2002

In this study, performance, flow characteristics and noise of a cross-flow-fan system, used in indoor unit of the split-type air conditioner, were predicted by computational simulation. Triangular elements were used to mesh the calculation domain and quadrilateral elements were attached to the blade surfaces and walls to enhance the simulation quality. The unsteady incompressible Wavier-Stokes equations were solved using a sliding mesh technique on the interface between rotating fan region and the outside. Two stripes of velocity stream inside the cross-flow-fan were shown - the one was due to the eccentric vortex and the other was due to the normal entrance flow. As the flow rate increased, the center of the eccentric vortex moved toward the inner blade tip and rear-guide, and the exiting flow still had velocity variation along the stabilizer, which can increase the noise level. The acoustic pressure was calculated by using Lowson's equation. From the calculated acoustic pressure, it was found that the trailing edge is a dominant of acoustic generation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.100-105
• /
• 2000

The present work describes the prediction method for the unsteady flow field and the acoustic pressure field of a ducted axial fan. The prediction method is comprised of time-marching free-wake method, acoustic analogy. and the Helmholtz-Kirchhoff BEM. The predicted sound signal of a rotor is similar to the experiment one. We assume that the rotor rotates with a constant angular velocity and the flow field around the rotor is incompressible and inviscid. Then, a time-marching free-wake method is used to model the fan and to calculate the flow field. The force of each element on the blade is calculated by the unsteady Bernoulli equation. Lawson's method is used to predict the acoustic source. The newly developed Helmholtz-Kirchhoff BEM for thin body is used to calculate the sound field of the ducted fan. The ducted fan with 6 blades is analysed and the sound field around the duct is calculated.

• 한국소음진동공학회논문집
• /
• 제24권11호
• /
• pp.907-918
• /
• 2014

In this study for the prediction of 3D underwater radiated noise pattern, a comparison between the proposed method(DHIE, Discrete Helmholtz Integral Equation) and the 3D underwater radiated noise calculation results using the measurement of near-field acoustic pressure data is performed. The near-field acoustic pressure in water is measured for the calculation of the far-field radiated noise pattern and the far-field acoustic power. Also the vibration field of the underwater structure is measured in simultaneously. Using the total far-field acoustic power and the vibration field on the surface of the structure, the proposed method(DHIE) can predict the underwater radiated noise pattern of the far-field The predicted results show the reasonable agreement within about 5dB comparing with the experiment result.