• 제목/요약/키워드: Precompression

검색결과 13건 처리시간 0.02초

모래의 인장강도에 미치는 함수비의 영향 (Effect of Moisture on Tensile Strength in Sand)

  • Kim, Tae-Hyung
    • 한국지반공학회논문집
    • /
    • 제18권3호
    • /
    • pp.13-21
    • /
    • 2002
  • 0.5% ~ 4.0%의 함수비를 가진 습윤모래의 인장강도 변화를 조사하기 위하여 개발된 인장 시험기를 이용한 일련의 실험을 수행하였다. 이러한 실험을 통하여 함수비, 상대밀도, 세립자 함유량 및 Precompression수준에 따라 모래의 인장강도는 변화하는 것으로 조사되었다. 함수비와 세립자 함유량이 증가함에 따라 인장강도는 증가하는 것으로 나타났다. 특히, 상대밀도가 증가함에 따라 인장강도의 증가 경향은 더욱 분명하게 나타났다. 그러나, 인장강도에 대한 상대밀도와 세립자의 효과는 실질적으로는 함수비에 따라 결정됨을 알 수 있었다. 낮은 함수비(w < 0.5%) 에서 모래의 인장강도에 미치는 상대밀도와 세립자의 영향은 감소하는 것으로 나타났다. 또한, 인장강도에 미치는 Precompression 효과도 실질적으로는 함수비에 의해 결정되며, Precompression의 크기와 기간의 영향은 상대적으로 적게 나타났다.

Cyclic compressive behavior of polyurethane rubber springs for smart dampers

  • Choi, Eunsoo;Jeon, Jong-Su;Seo, Junwon
    • Smart Structures and Systems
    • /
    • 제20권6호
    • /
    • pp.739-757
    • /
    • 2017
  • The main goal of this study is to investigate the hysteretic behavior of polyurethane rubber springs in compression with and without precompression. The precompression is introduced to provide rigid force in the behavior, and thereby a precompressed rubber spring can be used for a restoring element. For the goal, this study prepares nine rubber springs for three suites which are all cylindrical in shape with a hole at the center. The rubber springs in each suite have different dimensions of diameter and length but have similar shape factors; thus, they are designed to have a similar compressive stiffness. Three rubber springs from the nine are tested with increasing compressive strain up to 30% strain to investigate the behavior of the rubber springs without precompression as well as the effect of the loading strain. The nine springs are compressed up to 30% strain with increasing precompressive strain from 0 to 20% at increments of 5%. The study analyzes the effective stiffness and damping ratio of the rubber springs with and without precompression, and the rigid force of the precompressed rubber springs is discussed. Finally, this study suggests a regression method to determine the minimum required precompression to eliminate residual strain after unloading.

초탄성 형상기억합금을 적용한 선행압축 폴리우레탄 댐퍼의 거동 특성 검증 (Verification of Behavior Characteristics of Precompression Polyurethane Damper Using Superelastic Shape Memory Alloy)

  • 김영찬;허종완
    • 대한토목학회논문집
    • /
    • 제43권4호
    • /
    • pp.413-420
    • /
    • 2023
  • 지진피해 감소를 위한 내진 구조 중에서 제진 구조는 댐퍼의 간단한 적용으로 효율적으로 내진 성능을 향상시키고 경제성을 확보할 수 있는 기술이다. 그러나 기존의 댐퍼는 요구 내진 성능과 재료 소성으로 인한 내구성에 대하여 한계를 나타낸다. 따라서 본 연구에서는 기본적으로 탄성 특성을 나타내는 폴리우레탄에 선행 압축을 가하고 초탄성 형상기억합금을 적용하여 복원 특성을 증진시킨 폴리우레탄 댐퍼를 제안하였다. 폴리우레탄 댐퍼의 특성을 검증하기 위하여 우선 개념을 정립하고 초탄성 형상기억합금과 강재 적용, 선행압축 크기를 설계 변수로 선정하여 설계 상세를 완성하였다. 또한, 구조 실험을 수행하여 응답 거동을 도출하여 하중 저항 성능, 잔류 변위, 회복률, 에너지 소산 능력을 분석하였다. 분석한 결과 폴리우레탄 댐퍼는 초탄성 형상기억합금 와이어를 적용하고 선행 압축이 증가하면 다양한 성능이 향상되는 결과를 나타냈다.

소단면 터널에서 에멀젼폭약의 사압현상과 대책 (Dead Pressure and its measures of Emulsion Explosives at Small Sectional Tunnel)

  • 민형동;정민수;진연호;박윤석
    • 화약ㆍ발파
    • /
    • 제26권2호
    • /
    • pp.29-37
    • /
    • 2008
  • 도로 및 철도 건설에서 적용되는 터널의 단면크기는 $50m^2$에서부터 $200m^2$의 중 대단면 터널이 주를 이루고 있으나, 전력구, 통신구, 광산용 터널, 용수를 위한 도수로터널 등 특수한 용도로 설계, 시공되고 있는 터널에서는 $20m^2$이하의 단면크기를 갖는 경우가 많다. 소단면 터널의 경우에는 협소한 작업공간으로 인하여 적용공법 뿐만 아니라 장비의 사용 또한 제약을 받게 되어 작업효율이 저하되고 공사기간이 늘어나게 되는 등 여러 가지 문제점을 안고 있다. 특히, 에멀젼 폭약을 사용하는 발파에서 먼저 기폭된 발파공의 충격압력에 의해 인접공의 폭약이 예비압축되어 사압현상을 일으키고 잔류약을 발생시키는 사례가 종종 발생하고 있다. 사압현상은 발파의 실패와 함께 2차적인 사고의 위험요인이 될 수 있으므로 이를 방지하기 위한 대책을 수립하여야 한다. 기존 문헌을 통하여 사압현상의 원인과 발생 가능성을 검토하였고, 사압현상이 발생한 소단면 터널현장을 대상으로 그 대책을 수립하여 적용하였다. 심발방법을 변경하여 전단의 충격압력을 견딜 수 있는 공간격을 확보하고 뇌관의 초시간격을 적절하게 배치한 발파패턴을 적용한 결과, 사암현상을 억제하고 잔류약의 발생을 감소시켜 계획 굴진장을 확보하였으며 파쇄석의 크기를 감소시키는 등 양호한 결과를 얻을 수 있었다.

자력 마찰과 기압축 고무 스프링을 이용한 스마트 댐퍼 (A Smart Damper Using Magnetic Friction And Precompressed Rubber Springs)

  • 최은수;최규찬
    • 한국강구조학회 논문집
    • /
    • 제28권4호
    • /
    • pp.223-229
    • /
    • 2016
  • 이 연구에서는 고무 스프링과 자력마찰을 조합한 스마트 댐퍼의 동적 실험을 수행하여 스마트 댐퍼의 깃발모양 (flag-shaped) 거동을 확인하고자 하였다. 스마트 댐퍼 동적실험을 수행하기 위하여, 네오디뮴 (NdFeB) 자석을 사용하였으며 $50mm{\times}50mm{\times}25mm$ ($B{\times}L{\times}H$)의 크기를 사용하였다. 또한 폴리우레탄 고무를 사용하였으며 길이 80mm 외경 80mm 내경 20mm의 크기의 원주형 고무스프링을 사용하였다. 동적 실험에서 자석의 개수와 진동수를 제어하여 수행하였으며, 자석의 개수는 0, 4, 8, 12개의 순서로 증가하였으며, 이는 자력 마찰력이 증가함을 의미하였다. 진동수는 0.1부터 2.0Hz까지 증가시키면서 진행하였다. 실험의 진행은 고무 스프링이 장착되지 않은 자력마찰 댐퍼의 자력 마찰력 평가 실험, 고무 스프링의 기압축량 평가 실험 및 최종적으로 자력 마찰력과 기압축 고무스프링이 합성된 스마트 댐퍼의 동적 실험 순서로 진행하였다. 실험 결과를 통하여 스마트 댐퍼의 깃발모양 거동을 평가하고 에너지 소산능력, 감쇠비를 평가하여 스마트 댐퍼로서의 성능을 확인하였다.

소단면 터널에서 에멀젼폭약의 사압현상과 대책

  • 민형동;정민수;진연호;박윤석
    • 대한화약발파공학회:학술대회논문집
    • /
    • 대한화약발파공학회 2008년도 추계학술발표회 논문집
    • /
    • pp.17-28
    • /
    • 2008
  • 국책사업이나 SOC의 확충을 위한 도로 및 철도의 건설에서 적용되는 터널의 단면크기를 보면, $50m^2$에서부터 $100m^2$이상의 중 대단면 터널이 주를 이루고 있으나, 전력구, 통신구, 소규모로 운영되는 광산의 채광용 터널, 용수를 위한 도수로터널 등 특수한 용도로 설계, 시공되고 있는 터널에서는 $20m^2$이하의 단면크기를 갖는 경우가 있다. 이러한 소단면 터널의 경우에는 협소한 작업공간으로 인하여 적용공법 뿐만 아니라 장비의 사용 또한 제약을 받게 되어 작업효율이 저하되고 공사기간이 늘어나게 되는 등 여러 가지 문제점을 안고 있다. 특히, 에멀젼 폭약을 사용하는 발파에서 먼저 기폭된 발파공의 충격압력에 의해 인접공의 폭약이 예비압축(Precompression)되어 사압현상을 일으키고 잔류약을 발생시키는 사례가 종종 발생하고 있다. 사압현상은 당해 발파의 실패와 함께 2차적인 사고의 위험요인이 될 수 있으므로 이를 방지하기 위한 대책을 수립하여야 한다. 이를 위해 기존 문헌을 통하여 사압현상의 원인과 발생 가능성을 검토하였고, 국내에서 주로 사용되는 에멀전폭약의 수중 내충격성시험과 충격압력 전달시험을 실시하여 사압현상의 발생정도를 측정하였으며, 사압현상이 발생한 소단면 터널현장을 대상으로 대책을 수립하여 적용하였다. 심발방법을 변경하여 전단의 충격압력을 견딜 수 있는 공간격을 확보하고 뇌관의 초시간격을 적절하게 배치한 발파패턴을 적용한결과, 사압현상을 억제하고 잔류약의 발생을 감소시켜 계획 굴진장을 확보하고 파쇄석의 크기를 감소시키는 등 양호한 결과를 얻을 수 있었다.

  • PDF

시료교란이 양산 점토의 압밀특성에 미치는 영향 (The Effects of Sample Disturbance on Consolidation Properties of Yang-San Clay)

  • 박정규;임형덕;이우진
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 가을 학술발표회 논문집
    • /
    • pp.95-102
    • /
    • 1999
  • It is important to estimate the magnitude of settlement and the time of primary consolidation in geotechnical engineering projects. For these purposes, site explorations and laboratory tests are usually performed. However, the mechanical properties determined from laboratory tests on the samples obtained by different sampling techniques show different trends. In this study, three types of consolidation test were carried out on the soil samples obtained by three different sampling techniques (76mm tube, 76mm piston, and block samples), to verify the effect of sample disturbance on consolidation properties. It was found that sampling methods have influence on the $\varepsilon$ - log $\sigma$'$_{v}$ relationship. While insignificant difference of compression indices from the samples obtained by different sampling techniques was observed in compression region, these values showed a different trend in precompression region. The values of $c_{v}$ and k of block samples had a tendency to be larger than those of piston and tube samples. At consolidation pressure larger than $\sigma$'$_{p}$, however, these properties became similar regardless of sampling methods. The block and piston samples gave slightly higher values of $C_{a/}$ $C_{c}$ than tube samples. In the results of I $L_{EOP}$ and CRS test, it was observed that the values of $\sigma$'$_{p measured}$/$\sigma$'$_{p best estimated}$ of Yang-San clay decreases when strain becomes larger than 1.0% and that precompression strain of block samples is in the range of 1.5~2.0% while those of piston and tube samples are 1.75~3.75%. It was also shown that the values of $\sigma$'$_{p}$ of block samples exceed those of piston and tube samples by about 6~10%.6~10%.%.%.%.%.

  • PDF

Dilatometer를 이용한 인천국제공항 지역의 지반개량효과 평가 (Evaluation to the effect of ground improvement at Inchon International Airport area using the Flat Dilatometer)

  • 김종국;김학중;전창대
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 봄 학술발표회 논문집
    • /
    • pp.309-316
    • /
    • 2000
  • When highly compressible, clayey soil layers lies at a limited depth and large consolidtion settlements are expected as the result of construction, precompression of soil may be used to minimize postconstruction settlement. In this study, we tried to find the possibility about the effect of ground improvement using flat dilatometer at the Inchon International Airport where preloading was installed. Field and laboratory tests were performed for soft ground before and after preloading in order to check the effectiveness of the soft ground improvement and compared with the test results of dilatometer which obtained before and after preloading at the same location Field tests such as flat dilatometer, vane, CPTu tests were performed before and after preloading and undisturbed samples are obtained to carry out laboratory tests. As comparing results, after preloading, unit weight, effective stress, undrained shear strength were increased and we can also check the decrease of consolidation late caused of decrease of void ratio. Furthermore, it is assumed that the possibility on the effect of ground improvement by using the flat dilatometer

  • PDF

Converting Panax ginseng DNA and chemical fingerprints into two-dimensional barcode

  • Cai, Yong;Li, Peng;Li, Xi-Wen;Zhao, Jing;Chen, Hai;Yang, Qing;Hu, Hao
    • Journal of Ginseng Research
    • /
    • 제41권3호
    • /
    • pp.339-346
    • /
    • 2017
  • Background: In this study, we investigated how to convert the Panax ginseng DNA sequence code and chemical fingerprints into a two-dimensional code. In order to improve the compression efficiency, GATC2Bytes and digital merger compression algorithms are proposed. Methods: HPLC chemical fingerprint data of 10 groups of P. ginseng from Northeast China and the internal transcribed spacer 2 (ITS2) sequence code as the DNA sequence code were ready for conversion. In order to convert such data into a two-dimensional code, the following six steps were performed: First, the chemical fingerprint characteristic data sets were obtained through the inflection filtering algorithm. Second, precompression processing of such data sets is undertaken. Third, precompression processing was undertaken with the P. ginseng DNA (ITS2) sequence codes. Fourth, the precompressed chemical fingerprint data and the DNA (ITS2) sequence code were combined in accordance with the set data format. Such combined data can be compressed by Zlib, an open source data compression algorithm. Finally, the compressed data generated a two-dimensional code called a quick response code (QR code). Results: Through the abovementioned converting process, it can be found that the number of bytes needed for storing P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can be greatly reduced. After GTCA2Bytes algorithm processing, the ITS2 compression rate reaches 75% and the chemical fingerprint compression rate exceeds 99.65% via filtration and digital merger compression algorithm processing. Therefore, the overall compression ratio even exceeds 99.36%. The capacity of the formed QR code is around 0.5k, which can easily and successfully be read and identified by any smartphone. Conclusion: P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can form a QR code after data processing, and therefore the QR code can be a perfect carrier of the authenticity and quality of P. ginseng information. This study provides a theoretical basis for the development of a quality traceability system of traditional Chinese medicine based on a two-dimensional code.

사전압밀된 포화점토의 응력이력과 2차압밀에 관한 연구 (A Study on the Stress History and Secondary Compression of Saturated Clays Subjected to Precompression)

  • 김형주
    • 한국지반공학회지:지반
    • /
    • 제10권4호
    • /
    • pp.167-180
    • /
    • 1994
  • 사전압밀된 포화점토의 응력이력이 2차압밀특성에 미치는 영향 및 Bjerrum모델이 과압밀점토의 2차압밀침하추정에 적용가능한지를 실험적으로 파악하기 위하여 재성형점토를 이용하여 재하-제하 및 재하-제하-재재하 응력이력의 조건에서 일련의 장기압밀시험을 실시하였다. 실험결과에 의하면 과압밀점토의 2차압밀침하는 전반부에서 응력이력의 영향을 받고 전반부의 2차압밀계수 Cn은 OCR(선행 압밀하중 Pcy재재하하중 Pr), 최대 OCR(선행압밀하중 Pcy제 하시의 하중 Pu)과,제하시간에 의존하며 과압밀비 증가에 따라 감소한다. 또한 2차압밀후반부 의 2차압밀계수 C.2는 OCR의 영향을 받으며 과압밀비 증가에 따라 감소한다. 최종적으로 실험 결과와 Bjerrum모델을 비교분석한 결과 임의 응력이력범위를 벗어나면 과압밀점토에서 Bjerrum모델의 적용은 가능하다.

  • PDF