• 제목/요약/키워드: Precision Thin Film Resistor

검색결과 18건 처리시간 0.025초

Study on the characteristic of high precision thin film resistor

  • Park Hyun Sik;Yu Yun Seop
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 학술대회지
    • /
    • pp.628-635
    • /
    • 2004
  • The characteristic of thin film resistor with low TCR( temperature coefficient of resistance ) and high precision are studied. The thin film resistor for 1/4W was fabricated and characteristic of these resistors was investigated. The fabricated device had the thickness of $2.48{\leqq}$ and the resistivity of $0.27{\omega}mm$. The electrical characteristic was evaluated by HP 4339B and 4284A instruments with HP l6339A. The profile of trimmed structure was also measured by non contact interferometer. The change of resistance and TCR increased with increasing roughness and resistance. To reduce the effect of stress annealing treatment was performed in the range of 563 to 623 K after trimming. The characteristic was improved after annealing. It is expected the fabricated device can be useful for high precision and low TCR. Fabricated thin film resistor has average deviation of resistance less than $0.35{\%}$ and TCR within 60.60ppm/K.

  • PDF

IC용 초정밀 박막저항소자의 제조와 특성연구 (Preparation of precision thin film resistor sputtered by magnetron)

  • 하홍주;장두진;조정수;박정후
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제8권1호
    • /
    • pp.13-20
    • /
    • 1995
  • To develope a high precision TiAIN thin film resistor, TiAIN films were deposited on A1$_{2}$03 substrates by reactive planar magnetron cosputtering from Ti and Al targets in an Ar-N$_{2}$ atmosphere. The characteristics of the TiAIN thin film were controlled by changing of the R.F. power on Ti and Al targets, and the N$_{2}$ partial pressure. The high precision TiAIN thin film resistor with TCR(Temperature Coefficient of Resistance) of less than 10ppm/.deg. C was obtained under the R.F. power condition of 160(w)/240(w) to Ti and Al targets at the N$_{2}$ partial pressure of 7*10$^{-5}$ Torr. The composition of these films were investigated by XRD, SEM and EDS.

  • PDF

Fabrication and Characterization of Ni-Cr Alloy Thin Films for Application to Precision Thin Film Resistors

  • Lee, Boong-Joo;Shin, Paik-Kyun
    • Journal of Electrical Engineering and Technology
    • /
    • 제2권4호
    • /
    • pp.525-531
    • /
    • 2007
  • Ni(75 wt.%)-Cr(20 wt.%)-Al(3 wt.%)-Mn(4 wt.%)-Si(1 wt.%) alloy thin films were prepared using the DC magnetron sputtering process by varying the sputtering conditions such as power, pressure, substrate temperature, and post-deposition annealing temperature in order to fabricate a precision thin film resistor. For all the thin film resistors, sheet resistance, temperature coefficient of resistance (TCR), and crystallinity were analyzed and the effects of sputtering conditions on their properties were also investigated. The oxygen content and TCR of Ni-Cr-Al-Mn-Si resistors were decreased by increasing the sputtering pressure. Their sheet resistance, TCR, and crystallinity were enhanced by elevating the substrate temperature. In addition, the annealing of the resistor thin films in air at a temperature higher than $300^{\circ}C$ lead to a remarkable rise in their sheet resistance and TCR. This may be attributed to the improved formation of NiO layer on the surface of the resistor thin film at an elevated temperature.

박막저항기 특성에 미치는 제조 공정 인자의 영향 (Effect of Manufacturing Parameters on Characteristic of Thin Film Resistor)

  • 박현식;유윤섭
    • 마이크로전자및패키징학회지
    • /
    • 제12권1호
    • /
    • pp.1-7
    • /
    • 2005
  • 저항 값을 맞추기 위한 트리밍 공정이 낮은 저항온도계수와 높은 정밀성을 요구하는 박막저항기 특성에 미치는 영향에 대한 연구가 수행되었다. 스퍼터링 방법으로 제조된 박막 저항기의 트리밍 속도에 따른 저항기의 특성 변화와 온도계수의 변화가 관찰되었다. 트리밍 속도의 증가에 따라서 박막 저항기 특성은 저하되었으며, 열처리로 저항 값의 평균 편차 $0.26\%$ 및 저항온도계수 52.77(ppm/K)의 개선효과가 있었다. 1k$\Omega$와 10k$\Omega$저항기가 100k$\Omega$ 박막저항기 보다는 특성이 양호하였으며, 트리밍 속도의 치적 조건으로는 20mm/sec와 특성 개선을 할 수 있는 최적 열처리 온도는 593K였으며 최적 조건에서 제작된 저항기의 저항 값의 평균 편차는 $0.31\%$ 및 저항온도계수 10(ppm/K)미만이었다.

  • PDF

초정밀 다층 Cermet 박막저항체 제조에 관한 연구 (A study on the manufacturing of super precision multilayer cermet thin film resistor)

  • 허명수;최승우;천희곤;권식철;이건환;조동율
    • 한국진공학회지
    • /
    • 제6권1호
    • /
    • pp.77-84
    • /
    • 1997
  • DC Magnetron Sputtering 방법으로 원기둥형 Alumina기판(직경 4mm, 길이 11mm) 상에 부(-)의 TCR특성의 TaN0.1(부도체)와 정(+)의 TCR특성의 Cr(금속)박막두께를 적절히 조절하므로써 초정밀 저항기를 제조하였다. 그리고 면저항(Rs)을 1k$\Omega$/수준으로 높이고 보 호막을 형성키 위하여 상부에 $Ta_2O_5$막을 입형 $Ta_2O_5/TaN_{0.1}/Cr/Al_2O_3$(substrate)의 다층 박 막저항체를 제조하였다. 적절한 조건(기판온도, $N_2$(g), Ar(g)의 유속 등)으로 상기 다층박막 내 각 막의 두께를 약10,100과 500nm두께로 증착했을 때, $Rs\approx 1k\Omega/\Box$$TCR\approx 20$\pm 5ppm/^{\circ}C$ 의 초정밀 저항체가 제조되었다.

  • PDF

NiCr 박막 저항계의 열적 안정성에 관한 연구 (The Study on Thermal Stability of NiCr Thin-films Resistor)

  • 김인성;정순종;김도한;송재성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.168-170
    • /
    • 2001
  • The NiCr is an important material for present thin-film resistor application owing to its low TCR and thermal stability. In this work, the NiCr thin films were deposited on corning glass substrate by reactive magnetron sputtering and the annealing at temperatures range from 300 to $500^{\circ}C$ for 20 min in vacuum. X-ray, AFM, $R_s$(surface leakage current) have been used to study the structural and electrical properties of the NiCr thin films. The high precision NiCr thin films resistor with TCR(temperature coefficient of resistance) of less then 10 ppm/$^{\circ}C$ was obtained under in in-situ annealing at $300^{\circ}C$ on Cr buffer layer substrate. It is clear that the NiCr thin-films resistor electrical properties are low TCR related with it's annealing and buffer layer condition. NiCr thin film resistor having a good thermal stability and low TCR properties are expected for the application to the dielectric material of passive component.

  • PDF

NiCr 박막의 어닐링과 열적안정성에 관한 연구 (The Study on Thermal Stability of NiCr Thin-films)

  • 김인성;민복기;송재성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
    • /
    • pp.81-84
    • /
    • 2004
  • The NiCr is an important material for present thin-film resistor application owing to its low TCR and thermal stability. In this work, the NiCr thin films were deposited on coming glass substrate by reactive magnetron sputtering and the annealing at temperatures range from 300 to $500^{\circ}C$ for 20 min in vacuum. X-ray, AFM, $R_s$(surface leakage current) have been used to study the structural and electrical properties of the NiCr thin films. The high precision NiCr thin films resistor with TCR(temperature coefficient of resistance) of less then $10\;ppm/^{\circ}C$ was obtained under in in-situ annealing at $300^{\circ}C$ on Cr buffer layer substrate. It is clear that the NiCr thin-films resistor electrical properties are low TCR related with it's annealing and buffer layer condition. NiCr thin film resistor having a good thermal stability and low TCR properties are expected for the application to the dielectric material of passive component.

  • PDF

고정밀 저항용 질화탄탈 박막의 특성 (Characteristic of Tantalum Nitride Thin-films for High Precision Resistors)

  • 최성규;나경일;남효덕;정귀삼
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
    • /
    • pp.537-540
    • /
    • 2001
  • This paper presents the characteristics of Ta-N thin-film for high precision resistors, which were deposited on Si substrate by DC reactive magnetron sputtering in an argon-nitrogen atmosphere(Ar-(4~16 %)$N_2$). Structural properties studied using X-ray diffraction(XRD) indicate the presence of TaN, $Ta_3N_5$ or a mixture of Ta-N phases in the films depending on the amount of nitrogen in the sputtering gas. The chemical composition are investigated by auger electro spectroscopy(AES). The optimized conditions of Ta-N thin-film resistors were deposited in 4 % $N_2$ gas flow ratio. Under optimum conditions, the Ta-N thin-film resistors are obtained a high resistivity, $\rho=305.7{\mu}{\Omega}cm$, a low temperature coefficient of resistance, TCR=-36 $ppm/^{\circ}C$.

  • PDF

고정밀 저항용 질화탄탈 박막의 특성 (Characteristic of Tantalum Nitride Thin-films for High Precision Resistors)

  • 최성규;나경일;남효덕;정귀상
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집
    • /
    • pp.537-540
    • /
    • 2001
  • This paper presents the characteristics of Ta-N thin-(ibm for high precision resistors, which were deposited oni substrate by DC reactive magnetorn sputtering in an argon-nitrogen atmosphere(Ar-(4∼16%)N$_2$). Sturcutural properties sutided using X-ray diffraction (XRD) indicate the presence of TaN, Ta$_3$N$\sub$5/ or a mixture of Ta-N phases in the films depending on the amount of nitrogen in the sputtering gas. The chemical composition are investigated by auger electro spectroscopy(AES). The optimized conditions of Ta-N thin-film resistors were deposited in 4 % N$_2$ gas flow ratio. Under optimum conditions, the Ta-N thin-film resistors are obtained a high resistivity, $\rho$=305.7 ${\mu}$Ωcm, a low temperature coefficient of resistance, TCR=-36 ppm/$^{\circ}C$.

  • PDF

정밀 다층 박막 도금을 이용한 빠른 동작 퓨즈 특성 설계 (Design of Fast Acting Fuse Characteristics Using a Precision Multi-layer Thin Film Plating)

  • 김은민;강창룡
    • 전기학회논문지
    • /
    • 제65권3호
    • /
    • pp.445-451
    • /
    • 2016
  • General fuse elements of solution for fast acting operation characteristics made using silver or silver alloy, those are not able to dominate cost competition to the advanced global leaders that have not only high technology but competitive price. In this study, the method that compose the fuse elements manufactured solution of fast acting operation characteristics by using precision multi-layer thin film plating and helical cutting process from low-priced copper metal. Furthermore, in order to move rated current line of fuse due to the heat loses, the manufacture construction method of fixed resistor is introduced, and then Ni-P plating layer and Sn plating layer are introduced multiply for controling fine opening time characteristics. So this study can establish the high productive and low-priced production method.