• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.197-202
• /
• 2001

This paper proposes a design method for improving the disassembly by using the axiomatic approach. A product developer must design disassembly as well as assembly when designing the structure of a product. Axiomatic approach is a design tool that optimizes design. In this paper design evaluation method using information axiom sets impact variables and value function. As a result, examining the relationship between the functional requirements and evaluating the information can optimize designs.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1104-1110
• /
• 2014

This paper investigates geometric effect of landmarks on three-dimensional navigation error in landmark-based vision navigation systems. Dilution of precision is derived for landmark measurement error on the focal plane of the camera and separately expressed in position DOP and attitude DOP. Values of DOP are observed for various configurations of landmarks.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.1
• /
• pp.43-54
• /
• 2000

Character-based trademarks constitute 90% of registered trademarks at the Korean Patent Office. This paper proposes a method to improve the precision rate when for similar trademarks in such systems. The proposed method first calculates the similarity measure by an image processing. The method has been implemented and merged with the existing device-mark retrieval system to improve precision rate by 16.2% compared to other approximate matching methods.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.165-168
• /
• 2001

This paper presents a design of a divide unit supporting IEEE-754 floating point standard single-precision with 32-bit word length. Its functions have been verified with ALTERA MAX PLUS II tool. For a high-speed division operation, the radix-4 non-restoring algorithm has been applied and CLA(carry-look -ahead) adders has been used in order to improve the area efficiency and the speed of performance for the fraction division part. The prevention of the speed decrement of operations due to clocking has been achieved by taking advantage of combinational logic. A quotient select block which is very complicated and significant in the high-radix part was designed by using P-D plot in order to select the fast and accurate quotient. Also, we designed all division steps with Gate-level which visualize the operations and delay time.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.749-754
• /
• 1989

This paper describes a remote measurement method for estimating unsteady flowrate through a pipeline. By this method, instantaneous flowrate at the remote location along a pipeline (distance L) from flowmeters is measured by making use of dynamic characteristics between two cross sections of the circular pipeline. Using this method, instantaneous flowrate is accurately measured at a location where it is difficult to setup flowmeters. The estimated flowrate waveforms by the method are compared with directly measured ones by cylindrical choke-type instantaneous flowmeter. The validity of the method is established.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.833-840
• /
• 2015

Inkjet technology is one of the commonly used technologies in the printed-electronics field. The primary issue regarding the usage of inkjet technology as a printed-electronics tool is the printing resolution; therefore, to print complicated patterns of precise dimensions, we developed software that can convert a CAD file into a bitmap image. Moreover, as a bitmap image is not comprised of physical dimensions, its resolution needs to be defined in terms of pixel distance to print a rasterized bitmap image. In this study, we investigated the effects of pixel distance and dot size on printing resolution; based on the experiment results, we concluded that the printed dot size should be used to determine the optimal pixel distance. Lastly, we also propose inkjet printing procedures for bitmap images.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.36-40
• /
• 2006

Diagnosis and repair tasks of an unbalanced rigid rotor reduce the chances of unexpected failure and the consequent losses in production, time, and money. This paper presents investigation of a balancing system for equilibration of rigid rotor unbalance. A practical vibration signal based method is developed for unbalance diagnosis using wavelet technology and a Lissajous diagram. This paper shows that a mass unbalance can be efficiently estimated through an appropriate narrow-band filter used to extract the required spectra component. The wavelet technology is used to design specified narrow filter bank. A modified Lissajous diagram is also introduced with statistical analysis to compute the phase position. Several experimental tests demonstrate the effectiveness in balancing the mass unbalance of a rigid rotor.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.329-332
• /
• 2002

Recently, most machineries have been small size and mobile type. Then the motors used in this field are developed in micro size such as about 2mm in diameter. The structure of this motor is similar to a general brushless DC motor but because of small sige there is no position sensor such as hall sensor. In this paper, we propose synchronous driving and control method for micro brushless DC motor without position sensor. We design and manufacture this controller and perform experiment to show the effectiveness of the proposed method.

• Transactions of Materials Processing
• /
• v.11 no.5
• /
• pp.414-422
• /
• 2002

Most of numerical analyses for injection molding have been based on the Hele Shaw's approximation: two-dimensional flow analysis. In some cases, that approximation causes significant errors due to loss of geometrical information as well as simplification of the flow characteristics along the thickness direction. The present work covers numerical analyses of injection molding using three-dimensional solid elements. The accuracy of the analysis results has been verified through some numerical examples in comparison with the classical shell-based approach. The Proposed approach is then applied to predict product defects and to improve flow characteristics for a precision electronics part. In addition, design of experiment has been utilized in order to find the optimal process conditions for better product quality.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.68-75
• /
• 2002

Most of numerical analyses for injection molding have been based on the Hele Shaw's approximation: two-dimensional flow analysis. In some cases, that approximation causes significant errors due to loss of geometrical information as well as simplification of the flow characteristics along the thickness direction. The present work covers numerical analyses of injection molding using three-dimensional solid elements. The accuracy of the analysis results has been verified through some numerical examples in comparison with the classical shell-based approach. The proposed approach are then applied to predict product defects and to improve flow characteristics for a precision electronics part. In addition, design of experiment has been utilized in order to find the optimal process conditions for better product quality.