• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.86.1-86.1
• /
• 2010

예비개질기(Pre-reformer)는 중대형 내부개질형 용융탄산염 연료전지(MCFC) 시스템에서 다양한 연료를 사용하기 위한 필수적인 화학반응기이다. 예비개질기는 스택 전단에 설치함으로서 스택 내부의 열균형을 유지하고, 다양한 원료를 연료로 이용할 수 있도록 하며, 황화물로부터 후단의 개질촉매 및 전극촉매를 보호하여 주개질 반응의 부담을 감소시켜 MCFC 시스템의 내구성 향상의 중요한 역할을 한다. 본 연구는 예비개질 반응기 설계에 CFD 모델링을 적용하기에 앞서 파일롯 반응기 내 농도/ 온도 구배를 측정하고자 하는 목적으로 수행되었다. 반응가스로는 천연가스 내 고차탄화수소(C2 이상) 중 상대적으로 높은 농도를 가진 에탄을 이용하였고, MCFC용 예비개질기의 운전특성을 고려하여 비교적 낮은 온도와 높은 수증기/탄소 비에서 단열반응기로 실험을 진행하였다. 향후 본 실험결과를 이용하여 CFD 모델링에 대한 검증을 수행할 예정이며, 하수처리장부생가스(ADG)/ 매립지 가스(LFG)용 MCFC 시스템을 위한 예비개질기 설계에도 적용을 하고자 한다.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.156-163
• /
• 2015

The fuel cells have been investigated in the applications of marine as the high efficient and eco-friendly power generating systems. In this study, modeling of IR Type molten carbonate fuel cell (Internal Reforming Type molten carbonate fuel cell) has been developed to analyze the feasibility of thermal energy utilization. The model is developed under Aspen plus and used for the study of system performances over regarding fuel types. The simulation results show that the efficiency of MCFC system based on NG fuel is the highest. Also, it is also verified that the steam reforming is suitable as pre-reforming for diesel fuel.

• 대한기계학회논문집B
• /
• 제34권4호
• /
• pp.341-347
• /
• 2010

본 연구에서는 부탄 개질기 운전조건에 따른 SOFC 시스템 효율을 모델링을 통해 분석하였다. SOFC 시스템은 크게 개질기, SOFC, 폐열 회수 장치로 구성하였다. 탄화수소 개질 반응으로 선택한 수증기 개질 반응은 흡열반응인 데에 반해 SOFC 에서 일어나는 전기화학반응은 발열반응이다. 따라서 시스템의 열관리 방법에 따라 효율이 크게 달라진다. 세부적으로 수증기 개질 반응은 운전 온도에 따라 수증기 개질 반응과 예개질 반응으로 분류되는데, 해석 결과 예개질 반응을 적용한 SOFC 시스템의 경우 더 높은 효율을 나타내었다. 시스템의 효율은 SOFC 온도 유지를 위한 열량과 온수로 회수되는 열량에 따라 달라지는데, 예개질 반응을 적용할 경우, 열관리가 더욱 효율적이어서 높은 효율을 나타내는 것으로 분석되었다.

• 대한기계학회논문집B
• /
• 제39권3호
• /
• pp.261-269
• /
• 2015

본 연구에서는 전산유체역학 상용 코드를 이용하여 곡유로 채널형 수소 개질기에 대한 수치 해석적 연구를 수행하였다. 상용코드에서 제공하는 연소모델의 사전 검증을 위하여 원통 채널형 개질기 형를 가지는 선행연구모델(23)에 대한 수치해석을 선행하여 수행하였고, 95% 이상 일치하는 결과를 얻을 수 있었다. 선행연구모델의 수치해석을 통해 연소모델에 대한 해석 타당성검증이 완료된 후, 반응기 형태 변화가 메탄올 전환율과 수소생성에 미치는 영향을 파악하여 기존보다 유로의 길이가 증가한 곡유로 채널형 개질기를 설계하고, 유량조건($10/15/20{\mu}l/min$)을 변수로 수치해석을 수행하였다. 그 결과 원통 채널형 개질기와 곡유로 채널형 개질기에서 발생하는 유동 특성 및 물질전달 특성을 파악할 수 있었고, 그리고 유량에 따른 메탄올 전환율 및 수소 생성에 관한 유용한 정보를 얻을 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.720-722
• /
• 2009

This work is mainly focused at developing the hydrogen production unit with the capacity of 20 $Nm^3/h$ of high purity hydrogen. At present steam reforming of natural gas is the preferable method to produce hydrogen at the point of production cost. The developed hydrogen production unit composed of natural gas reformer and pressure swing adsorption system. To improve the thermal efficiency of steam reforming reactor, the internal heat recuperating structure was adopted. The heat contained in reformed gas which comes out of the catalytic beds recovered by reaction feed stream. These features of design reduce the fuel consumption into burner and the heat duty of external heat exchangers, such as feed pre-heater and steam generator. The production rate of natural gas reformer was 41.7 $Nm^3/h$ as a dryreformate basis. The composition of PSA feed gas was $H_2$ 78.26%, $CO_2$ 18.49%, CO 1.43% and $CH_4$ 1.85%. The integrated production unit can produce 21.1 $Nm^3/h$ of high-purity hydrogen (99.997%). The hydrogen production efficiency of the developed unit was more than 58% as an LHV basis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.264-269
• /
• 2000

As a part of the ongoing effort towards commercial application of high-temperature fuel cell power generation systems, we have recently built a pilot-scale molten carbonate fuel cell power plant and tested it. The stack test system is composed of diverse peripheral units such as reformer, pre-heater, water purifier, electrical loader, gas supplier, and recycling systems. The stack itself was made of 40cells of $6000cm^2$ area each. The stack showed an output higher than 25kW power and a reliable performance at atmospheric operation. A pressurized performance was also tested, and it turned out the cell performance increased though a few cells have shown a symptom of gas crossover. The pressurized operation characteristics could be analyzed with numerical computation results of a stack model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.687-689
• /
• 2000

Molten Carbonate Fuel Cell (MCFC) with high electrical efficiency and low environmental effect has been developed for the commercial application of power generation fields. Recently we have built a 25 kW molten carbonate fuel cell power generation system and tested it. The MCFC system is composed of diverse peripheral units such as reformer, pre-heater, water purifier. electrical loader, gas supplier, and recycling systems. The stack itself was made of 40 cells of $6.000 cm^2$ area each. The stack showed an output of 28.6 kW power and a reliable performance at atmospheric operation. while in pressurized operation the stack showed an output 25.6 kW lower than the atmospheric operation. The reason of lower performance of pressurized operation was caused from a gas cross over shown in few cells in the stack.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.75.1-75.1
• /
• 2010

This research presents a fuel cell simulator for control logic verification and operator training. Nowadays, power industries are focusing on clean energy as a response to new policy. The fuel cell can be the solution for clean energy, but operating technology is not well developed compared to other conventional power plans because of its short history. Therefore we need a simulator to verify the new control strategy and train operators, because the price of a real fuel cell system is too high and mechanically weak to be used for these kind of purposes. To develop the simulator, a 300 KW MCFC(Molten Carbonate Fuel Cell) system was modeled with stack, BOPs(pre-reformer, steam generator, etc) and mechanical components(valves, pipes, pumps, blowers, etc). The process model was integrated to emulated control system and HMI(Human Machine Interface). A static load and open loop tests were conducted for verifying the accuracy of the process model, since it is the most important part in the simulation. After verifying the process model, an automatic load change and start-up tests were conducted to verify the performance of a new control strategy(logic and functional loops).

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.57-60
• /
• 2008

KEPRI has studied planar type SOFC stacks using anode-supported single cells and kW class co-generation systems for residential power generation. A 1kW class SOFC system consisted of a hot box part, a cold BOP part and a water reservoir. A hot box part contains a SOFC stack made up of 48 single cells and ferritic stainless steel interconnectors, a fuel reformer, a catalytic combustor and heat exchangers. Thermal management and insulation system were especially designed for self-sustainable operation. A cold BOP part was composed of blowers, pumps, a water trap and system control units. When a 1kW class SOFC system was operated at $750^{\circ}C$ with hydrogen after pre-treatment process, the stack power was 1.2kW at 30 A and 1.6kW at 50A. Turning off an electric furnace, the SOFC system was operated using hydrogen and city gas without any external heat source. Under self-sustainable operation conditions, the stack power was about 1.3kW with hydrogen and 1.2kW with city gas respectively. The system also recuperated heat of about 1.1kW by making hot water.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.140-148
• /
• 2005

The molten carbonate fuel cell (MCFC) is endowed with the high potential especially in future electric power generation industry by its own outstanding characteristics. KEPCO (KEPRI) started a 100 kW MCFC system development program in 1993 and has been executed 100kW system develpilot plant successfully completed first phaseopment by 2005 on the basis of successful results of 25kW system development. In this program, the components and mechanical structure for 100 kW stack and system construction were completed on last year and now system pre - commissioning was being executed. A 100 kW MCFC power plant was constructed at the site of Boryeong Thermal Power Plant. A 100 kW MCFC system has characterized as a high pressure operation mode, CO2 recycle, and externally reforming power generation system. The 100 kW MCFC system consisted with stacks which was made by two 50 kW sub-stacks, 90 cells with 6,000 cm2 active area and BOP including a reformer, a recycle blower, a catalytic burner, an inverter, and etc. The system has been operated from 13th of September on this year and produced 50 kW AC under atmospheric pressure condition and expected to operate by the end of this year.