• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.11-18
• /
• 2001

To clarify the influence of SAC shape of hole-type diesel nozzle on injection characteristics and spray patterns, the injection rate of three nozzle types(standard SAC nozzle, Needle-cut VCO nozzle and VCO nozzle) were measured by Zeuch's method and pictures of the sprays were taken by CCD camera. As the pump speed became higher, the injection characteristics of the three nozzles were different. Injection rate and perssure curves at the high pressure pipe in Needle-cut VCO nozzle were much more similar to the VCO nozzle than those of the SAC nozzle. When the needle was at pre-lift period for all speeds, the spray of the Needle-cut VCO nozzle showed almost the same shape as the SAC type nozzle. There was no differense in spray pattern at the needle full-lift periods.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1309-1310
• /
• 2011

• 한국지반환경공학회 논문집
• /
• 제25권3호
• /
• pp.5-11
• /
• 2024

이산화탄소 포집 및 지중 저장을 위해 유망한 지질학적 구조로는 대수층, 폐유전 및 가스전 등이 존재한다. 이 중 대수층은 다른 지질학적 구조에 비해 많은 양의 이산화탄소 저장이 가능한 것으로 판단됨에 따라 그 관심이 증가하고 있으며, 대수층의 특성을 반영하여 이산화탄소 저장 효율 향상을 위한 기술 개발이 필요한 실정이다. 따라서, 본 연구에서는 음이온성 계면활성제를 활용하여 공극수가 존재하는 마이크로모델 내 계면활성제 선 주입 후 초임계 이산화탄소 후속 주입에 따른 이산화탄소 저장 효율 평가를 수행하였다. 그 결과 선 주입되는 계면활성제 수용액의 농도가 증가함에 따라 이산화탄소 저장 효율이 개선되며, 농도가 낮을수록 이산화탄소 저장 효율 개선을 위한 더 많은 계면활성제의 주입이 필요한 것으로 나타난다. 또한 동일한 계면활성제 농도 조건에서 선행 연구의 계면활성제-초임계 이산화탄소 치환보다 계면활성제 선 주입 방식에서 이산화탄소 저장 효율은 약 30% 낮은 값을 나타내며, 본 연구의 최대 농도 조건에서 선행 연구와 유사한 이산화탄소 저장 효율을 나타낸다. 이러한 결과는 향후 대수층 내 이산화탄소 저장 효율 향상을 위한 계면활성제 적용 시 농도 결정에 활용될 것으로 기대된다.

• 대한한의학회지
• /
• 제38권1호
• /
• pp.34-45
• /
• 2017

Objectives: This study aimed to investigate the effect of banhasasim-tang intravenous herbal acupuncture (BST-IVHA) on emesis induced by chemotherapy in rats. Methods: This study used methotrexate(MTX)-induced Rat-Pica model. The rats were randomly allocated into seven groups; normal group, two saline groups, four Banhasasim-tang(BST) groups (groups treated with BST-IVHA). All the experimental animals except those in the normal group were injected with MTX. Those in the pre-treatment groups were treated with saline injection (saline group) or BST-IVHA (BST group) before MTX injection. Those in the post-treatment groups were treated with saline injection or BST-IVHA after MTX injection. Two different dosages of BST-IVHA solution (low dose; BST-1 group, high dose; BST-2 group) were used. The changes in body weight, food intake, and kaolin consumption at 24h, 48h, and 60h were monitored and analyzed. Results: 1. No significant change was found in body weight. 2. The food intake at 48h was increased significantly in the BST-1 pre-treatment group($19.89{\pm}0.01g$) compared to the pre-saline group($18.68{\pm}0.26g$). 3. The kaolin consumption was significantly decreased in the BST-1 pre-treatment group at 24h($0.24{\pm}0.02g$) and 60h($0.36{\pm}0.14g$), in the BST-2 pre-treatment group at 48h($0.02{\pm}0.01g$) and 60h($0.80{\pm}0.31g$) compared to the pre-saline group($24h:0.81{\pm}0.37g$, $48h:0.76{\pm}0.43g$, $60h:1.56{\pm}0.03g$). The kaolin consumption was also significantly decreased in the in the BST-1 post-treatment group at 24h($0.05{\pm}0.02g$), 48h($0.64{\pm}0.06g$) and 60h($0.14{\pm}0.05g$), in the BST-2 post-treatment group at 48h($0.01{\pm}0.01g$) and 60h($0.01{\pm}0.01g$) compared to the post-saline group($24h:0.51{\pm}0.4g$, $48h:3.58{\pm}0.33g$, $60h:2.5{\pm}0.2g$). Conclusions: BST-IVHA showed an anti-emetic effect in MTX-induced rat-pica model. This result suggests that BST-IVHA could be an effective treatment for chemotherapy-induced emesis.

• Imaging Science in Dentistry
• /
• 제42권1호
• /
• pp.13-18
• /
• 2012

Purpose : The aim of this study was to investigate the effect of the autologous blood injection (ABI) for chronic recurrent temporomandibular joint (TMJ) dislocation using magnetic resonance imaging (MRI). Materials and Methods : ABI was applied to 14 patients who had chronic recurrent TMJ dislocation. MRIs of the patients were taken and compared before and one month after the injection. Results : All of the patients had no dislocations of their TMJs on clinical examination one month after the injection. In the pre-injection, unilateral or bilateral TMJ dislocations were observed on MRIs in all patients. One month after the injection, TMJ dislocations were not observed in MRI evaluation of any patients. A significant structural change that caused by ABI was not observed. Conclusion : The procedure was easy to perform and it caused no foreign body reaction. However, it was unclear how the procedure prevented the dislocation.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.367-375
• /
• 1986

본 연구에서는, 주분무의 착화지연기간에 미치는 보조연료 분사시기의 영향 및 공기유동을 연소장 내에 도입시켜 분무와 공기의 혼합을 적극적으로 촉진시킴에 따라 그 후의 연소과정이 어떤 영향을 받는가에 대해서 검토했다.또 소형고속 디이 젤기관에서는 분무의 연소기간을 최대한 단축 시키지 않으면 안되므로, 보조연료 분사 에 의해 그 단축목적이 어느 정도 달성될 수 있는 가능성을 제2보에서 시사한 바 있으 나 본 연구에서 더욱 상세히 검토했다.

• 유기물자원화
• /
• 제8권4호
• /
• pp.121-128
• /
• 2000

본 연구에서는 매립 폐기물 분해와 사전안정화를 위한 최적 산소 전달 방식을 평가하기 위하여 대상 매립지와 모형매립조 실험을 수행하였다. 매립년한이 오래된 매립지의 경우 낮은 유기물 함량으로 인해 저압/저유량의 연속 공기 주입방식이 효과적인 것으로 나타났다. 또한, 공기 주입 및 매립가스 추출은 유기물의 생분해 보다 매립지 내부의 공기 치환에 의한 SVE (Soil Vapor Extraction)효과가 보다 큰 것으로 나타났다. 따라서, 매립지의 공기주입 방식은 매립지의 조기안정화뿐만 아니라 매립지 굴착, 선별 및 이송시 발생될 수 있는 가스 문제를 사전에 저감할 수 있을 것으로 판단된다.

• Journal of Oral Medicine and Pain
• /
• 제48권1호
• /
• pp.16-24
• /
• 2023

Purpose: To determine the effects of botulinum toxin (BoNT) injection into the human masseter muscle on the morphology of the mandibular condyle bone using cone-beam computed tomography (CBCT). Methods: Twenty volunteers were randomly assigned to one of two groups. Group I received a single BoNT injection; Group II received two injections, with the second being administered 4 months after the first. CBCT scans of both temporomandibular joints (TMJs) were performed before and 6 months after the first injection. Bony changes in the cortical layers of the condyle heads were evaluated and the long and short axes of both mandibular condyles were measured. The thickness at the thinnest part of glenoid fossa was also quantitatively measured. Results: There was no significant difference between pre- and post-injection CBCT images. Furthermore, no changes in the cortical layers of the condyle heads were observed among the subjects who exhibited mild degenerative TMJ changes. The quantitative measurements (long axis, short axis, and the thickness of thinnest part of glenoid fossa roof) did not differ significantly between pre- and post-injection except for the long axis in Group I. Conclusions: Within the limitations of this study, it appears that BoNT injections into human masseter muscles do not alter the morphology of the mandibular condyle bone in healthy adults.

• 한국분무공학회지
• /
• 제18권4호
• /
• pp.188-195
• /
• 2013

An investigation on spray characteristics of fuels which diesel and di-methyl ether (DME) with change of injection pressure used the multi-injection in constant volume combustion chamber (CVCC). Diesel was already used famous fuel which we could use. DME showed similar features with diesel like as cetane number, auto-ignition temperature. High cetane number of diesel and DME could make possible to compression ignition. DME showed different atomization from diesel due to evaporating pressures and boiling points. Experiments were carried out in CVCC equipped with Delphi solenoid 6-hole type injector and the spray characteristics of diesel and DME were tested the various pre and pilot injection. Terms of injections and a number of injections in multi-injection has been controlled. Experiments were performed in 2 types that 1500 rpm, 2000 rpm and under the condition of injection ranging from 100 bar to 500 bar. From the results of this experiment diesel showed longer spray penetration than DME. That result showed different of atomization speed DME and diesel. Result of high injection pressure condition showed similar spray characteristics diesel and DME. After this investigation, new conditions and experiments using laser light to go forward and add the fuels like as the biodiesel and diesel and DME blend.

• 한국전산유체공학회지
• /
• 제12권3호
• /
• pp.8-12
• /
• 2007

An optimized bidet nozzle design to form the required swirl water jet is proposed with the help of numerical analysis. The bidet can do the cleaning process of human body by water injection and the speed/pressure/injection angle/magnitude of swirl intensity of water jet determine the cleaning capability and personal subjective feeling. The objective of this research is to design optimal water injection nozzle to make stable swirl intensity. The effect of individual design variables are analyzed from the basic design and the final design is deduced to make high performance water jet within the pre-determined operation conditions.