• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.799-804
• /
• 2003

Friction phenomenon can be described as two parts which are pre-sliding and sliding regions. In motion of the sliding region, friction forces depend on the velocity of the system and are known as Coulomb, stick-slip, stribeck effect and viscous friction. The pre-sliding region, which is before breakaway, depends on the position of the system. The motion of friction in the sliding region can be described as the LuGre model. But the pre-sliding motion of friction, which has hysteresis characteristics in general, is not known widely. Therefore, an improved friction model, which can describe the motion of friction in the pre-sliding region, is proposed in this paper. And simulation and experimental results show the effectiveness of the proposed friction model for precise tracking control systems.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.67-70
• /
• 2002

In the present study a pre/post-processor program has been developed to be used with a general CFD code. This program is capable of performing the basic functions of the pre/post-processing, which include mesh generation and post processing plots. Also through perspective projection, this program can be used to check the quality of generated mesh by moving around inside the mesh. The smoke visualization can be also performed with the present program to visualize the smoke behavior in the case of fire simulation. The examples of the program execution are given in paper.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.605-608
• /
• 1999

A conventional image coder, such as JPEG, requires not only DCT and quantization but also additional pre-filtering under noisy environment. Since the pre-filtering removes camera noise and improves coding efficiency dramatically, its efficient implementation has been an important issue. Based on well-known noise removal techniques in image processing fields, this paper introduces an efficient scheme by adapting a noise removal procedure to block-based image coders. By using two-dimensional DCT factorization, the proposed image coder has only a modified DCT and a VLC, and performs pre-filtering and quantization simultaneously in the modified DCT operation.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1020-1021
• /
• 2015

본 논문에서는 상용전압 AC 220V를 인가전압으로 사용하여 PMIC(Power Management IC)의 구동에 적합한 전압을 인가해주는 Pre-Regulator를 설계하였다. 설계된 Pre-Regulator는 상용전압을 사용하기 때문에 Device의 내압이 700V인 Magnachip $0.35{\mu}m$ BCD 공정을 이용하여 설계되었으며, 회로의 구성은 저전압 입력 보호 기능 및 JFET의 구동 제어를 위한 Under Voltage Lock Out(UVLO)회로, 전압조정기(Regulator)의 기준전압을 생성해주는 밴드갭 기준전압 발생(Bandgap Reference)회로, LDO(Low Drop Out)회로로 구성되어있다.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1727-1729
• /
• 2002

To cope with increasing of electric power demand in metropolitan areas, large capacity underground power cables are needed. Under such situations, our company has developed 345kV XLPE insulated cable and accessories. As the final step of development of the 345kV XLPE cable and accessories, the pre-qualification test was carried out on the test line composed of cables, pre-fabricated joints, EB-Gs and EB-As. This paper sums up the pre-qualification test conditions and the results.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.431-439
• /
• 2016

This paper reports a numerical method for determining the resistance and self-propulsion performance of an asymmetric pre-swirl stator used as an energy saving device by cancelling a propeller's rotational energy. The present asymmetric pre-swirl stator propulsion system consists of three blades at the port and one blade at the starboard, which can effectively recover the biased rotating flow. This paper provides the design concept for the present asymmetric stator, which produces more efficient results than a conventional propeller.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.162-167
• /
• 2004

The low velocity impact characteristics of composite laminate curved beams are investigated to increase damage tolerance and reduce the deflection. Drop weight impact tests of the composite curved beam were performed with respect to pre-load, then the damage after impact was measured by macrography. Also, finite element analyses were performed using ABAQUS to investigate the stress state of composite curved beam with respect to pre-load and impact. From the investigation, it was found that pre-load of the composite curved beams had much influence on impact damage of the curved beam, which showed good agreement with the experiment results.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.3
• /
• pp.7-11
• /
• 2012

Among various wet cleaning methods, megasonic and jet spray gained their popularity in single wafer cleaning process for the efficient removal of particulate contaminants from the wafer surface. In the present study, we evaluated these two cleaning methods for particle removal efficiency (PRE) and pattern damage on the aluminum layered wafer surface. Also the effect of $CO_2$ dissolved water in jet spray cleaning is assessed by measuring PRE. It is observed that the jet spray cleaning process is more effective in terms of PRE and pattern damage compared to megasonic cleaning and the mixing of $CO_2$ in the water during jet sprays further increases the PRE. We believe that the outcome of the present study is useful for the semiconductor cleaning process engineers and researchers.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1289-1291
• /
• 1996

In this paper, we propose a new adaptive pre-processing technique for the linearization of a weakly nonlinear system which can be modeled by a Volterra series up to third order. To compensate the nonlinear effects of a given system, an update algorithm for the linear filter coefficients of the proposed adaptive pre-processor is introduced, and to compensate the linear distortion of the given system, the linear inverse filter is also utilized. For the performance test of the proposed adaptive pre-processor, computer simulation results obtained by analyzing an ANRSS loudspeaker model are provided.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.650-652
• /
• 2003

무선 통신 기술의 발전으로 무선망에서 멀티이디어 사용자의 수가 급격히 증가하고 있으며 서비스 질에 대한 요구가 증가하고 있다. 하지만 모바일 컴퓨팅 환경에서는 무선 링크의 취약성과 사용자의 이동성으로 인해 연속 멀티미디어 스트리밍 서비스를 제공하기 어렵다. 본 논문에서는 핸드오프로 인한 지연이나 패킷 손실 없이 사용자에게 멀티미디어 서비스를 제공하기 위해서 지능형 버퍼링 핸드오프 프로토콜과 Pre-customization 기법을 제안한다. 지능형 버퍼링 핸드오프 프로토콜은 핸드오프 중에 모바일 호스트가 이동할 셀의 Basestation에 미리 패킷을 버퍼링하고 MH가 새로운 셀로 이동했을 때. 즉시 패킷을 전송할 수 있게 한다. 그리고 핸드오프 동안 Basestation은 Pre-Customization을 통해 미리 멀티미디어 데이터를 무선 링크 상태와 단말기 수용성. 사용자 선호도를 고려한 필터링을 항으로써 QoS 재협상 없이 서비스를 제공한다.